Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Monitoring of Machining Process by Measuring Vibration of Cutting Forces

절삭력 진동 측정에 의한 가공공정 모니터링

  • Jeon, Jae Hyeon (Dept. of Mechanical Engineering, Soongsil University) ;
  • Kim, Jin Oh (Dept. of Mechanical Engineering, Soongsil University)
  • Received : 2012.08.16
  • Accepted : 2012.10.09
  • Published : 2012.11.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deal with a technique for monitoring machining conditions by measuring the vibration of cutting forces at milling machining. The vibrations of cutting forces in milling process were measured and analyzed to be related with processing parameters. The magnitude of cutting force is linearly proportional to the feed rate and cutting depth, and frequency of cutting force is linearly proportional to the rotating speed. Wired and wireless communication methods were applied in transmitting the measured vibration signals and the two methods were compared. The magnitude of the vibration signals transmitted by the wireless communication method was similar to that transmitted by the wired communication method.

Keywords

References

  1. Kim, B. H., Ahn, H. J., Kim, J. O., Yoo, M., Cho, K. J. and Choi, D. S., 2010, Application of M2M Technology to Manufacturing Systems, Proceedings of ICTC 2010, pp. 519-520.
  2. Jeon, J. H., Hong, J. H., Jeong, S. I., Cho, L. J., Oh, S. H., Piao, C., Kim, J. O. and Yoo, M., 2011, Application of Vibration Sensors for Intelligent Manufacturing System of IT-Convergence Research, Proceedings of the KSNVE Annual Spring Conference, pp. 714-715.
  3. Jeon, J. H., Hong, J. H. and Kim, J. O., 2012, Vibration of Cutting Forces during Milling Machining, Proceedings of the KSNVE Annual Spring Conference, pp. 473-474.
  4. Jeon, J. H., Kim, J. O., Lee, J. M. and Jung, S. H., 2012, Integration of Vibration Measurement and Wireless Communication for Monitoring Milling Machining, Proceedings of the KSME IT Convergence Division Spring Conference, pp. 85-86.
  5. No, S. L. and Yoo, O. I., 2007, Manufacturing Processes, Bogdoo, pp. 202-210.
  6. Kim, J. D. and Kim, D. S., 1997, Development of a Combined-type Tool Dynamometer with a Piezo-film Accelerometer for an Ultra-precision Lathe, Journal of Materials Processing Technology, Vol. 71, No. 3, pp. 360-366. https://doi.org/10.1016/S0924-0136(97)00098-8
  7. Hwang, C. H. and Cho, D. W., 1999, Chatter Prediction in Endmilling Using Dynamic Cutting Force Modeling, Journal of the Precision Engineering, Vol. 16, No. 2, pp. 104-115.
  8. Lee, J. M., Jeon, J. H., Jung, S. H. and Kim, J. O., 2012, Android Based Wireless Vibration Sensor System for Milling Machining, Proceedings of the KSME IT Convergence Division Spring Conference, pp. 112-113.

Cited by

  1. Monitoring Machining Conditions by Analyzing Cutting-Force Vibration vol.39, pp.9, 2015, https://doi.org/10.3795/KSME-A.2015.39.9.839