Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지
DOI QR코드

DOI QR Code

AUTOSAR-ready Light Software Architecture for Automotive Embedded Control Systems

차량용 전자제어시스템을 위한 AUTOSAR 대응 경량화 소프트웨어 아키텍처 연구

  • Lee, Kangseok (Department of Control & Instrumentation Engineering, Graduate School, Changwon National University) ;
  • Park, Inseok (Department of Automotive Engineering, Graduate School, Hanyang University) ;
  • SunWoo, Myoungho (Department of Automotive Engineering, Hanyang University) ;
  • Lee, Wootaik (Department of Control & Instrumentation Engineering, Changwon National University)
  • 이강석 (창원대학교 대학원 제어계측공학과) ;
  • 박인석 (한양대학교 대학원 자동차공학과) ;
  • 선우명호 (한양대학교 미래자동차공학과) ;
  • 이우택 (창원대학교 제어계측공학과)
  • Received : 2012.02.13
  • Accepted : 2012.07.18
  • Published : 2013.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents AUTOSAR-ready light software architecture (AUTOSAR-Lite), which is a light weighted version of the AUTOSAR, for automotive embedded control systems. The proposed AUTOSAR-Lite reduces overhead problems caused by the excessive standard specifications of AUTOSAR. Concurrently, AUTOSAR-Lite keeps advantages of AUTOSAR such as a scalability, re-usability, reliability, and transferability. The fundamental design of AUTOSAR-Lite is originated from the AUTOSAR standard. AUTOSAR-Lite is composed of three layers such as an application software, runtime environment, and basic software layer. The application software layer adopts component-based design methodology as AUTOSAR. The runtime environment layer integrates interfaces between application and basic software layers. In case of the basic software layer, restrictions of the module configurations and interfaces of basic software are minimized. In order to validate the feasibility of AUTOSAR-Lite, a software design result based on AUTOSAR-Lite software architecture for electronic throttle control (ETC) system is suggested.

Keywords

References

  1. N. Navet, Y. Song, F. Simonot-Lion and C. Wilwert, "Trends in Automotive Communication Systems," Proceedings of the IEEE, Vol.93, pp.1204-1223, 2005. https://doi.org/10.1109/JPROC.2005.849725
  2. M. Broy, I. Kruger, A. Pretschner and C. Salzmann, "Engineering Automotive Software," Proceedings of the IEEE, Vol.95, pp.356-373, 2007.
  3. S. Voget, "Future Trends in Software Architectures for Automotive Systems," Advanced Microsystems for Automotive Applications, Germany, pp.457-469, 2003.
  4. J. Kim, G. Bhatia, R. Rajkumar and M. Jochim, "An AUTOSAR-Compliant Automotive Platform for Meeting Reliability and Timing Constraints," SAE 2010-01-0448, 2011.
  5. K. Lakshmanan, G. Bhatia and R. Rajkumar, "Integrated end-to-end Timing Analysis of Networked AUTOSAR-compliant Systems," in Design, Automation & Test in Europe Conference & Exhibition (DATE), pp.331-334. 2010.
  6. A. Graf, M. Jehle and G. Winkler, "Open Engine Management System for Future Engine Concepts Using the Example of the PowerSAR - Powertrain Manager," SAE 2011-01-0209, 2011.
  7. G. Park, S. Lee, D. Kum, C. Choi, W. Lee and W. Won, "Development of Software Component for EPS System based on AUTOSAR," Annual Conference Proceedings, KSAE, pp.1867-1873, 2009.
  8. J. Kim, W. Lee, S. Hong, S. Oh and K. Lee, "Development Technique of the AUTOSAR Standard-Based Body System Software," Spring Conference of KSAE, Vol.3, pp.1423-1428, 2006.
  9. C. Lim, J. Kim and W. Lee, "Development of a SW Platform for a MPC5554 Based Control System," Symposium of Electric, Electronics and ITS part, KSAE, pp.72-77, 2006.
  10. O. Niggemann, U. Eisemann, M. Beine and U. Kiffmeier, "Behavior Modeling Tools in an Architecture-driven Development Process - From Function Models to AUTOSAR," SAE 2007-01-0507, 2007.
  11. R. Yerushalmi and R. A. Felice, "Implementing AUTOSAR Atomic Software Components Using UML/SYSML in C," SAE 2010-01-0265, 2010.
  12. N.-Y. Cho, M.-G. Kyung and D. Min, "Development of AUTOSAR Conformance Test Architecture Modeling Tool Using Eclipse GMF," Proceedings of Korea Computer Congress 2010, Vol.37, No.1(B), pp.337-340, KIISE, pp.337-340, 2010.
  13. S. Bunzel, "Overview on AUTOSAR Cooperation," in 2nd AUTOSAR Open Conference, Tokyo, Japan, 2010.
  14. AUTOSAR Consortium, List of Basic Software Modules Ver.1.5.0, Release 4.0, Rev2, 2010.
  15. AUTOSAR Consortium, Layered Software Architecture Ver.3.1.0, Release.4.0, Rev2, 2010.
  16. AUTOSAR Consortium, Specification of Communication, Ver.4.1.0, Release.4.0, Rev2, 2010.
  17. T. M. Galla and R. Pallierer, "AUTOSAR - Challenges and Solutions from a Software Vendor's Perspective," Elektrotechnikund Informationstechnik, Vol.128, pp.234-239, 2011. https://doi.org/10.1007/s00502-011-0006-8
  18. M. Di Natale and A. L. Sangiovanni-Vincentelli, "Moving from Federated to Integrated Architectures in Automotive: The Role of Standards, Methods and Tools," Proceedings of the IEEE, Vol.98, pp.603-620, 2010. https://doi.org/10.1109/JPROC.2009.2039550
  19. D. Choi, D. Hong and S. Hong, "Embedded Real-time Software Architectures for Automotive Systems," Symposium of Electric, Electronics and ITS Part, KSAE, pp.43-50, 2005.
  20. S. Jin, J. Kang and W. Lee, "Electronic Throttle Body Model Allowing for Non-linearity of DC Motor Driver," Transactions of KSAE, Vol.16, No.1, pp.71-77, 2008.
  21. T. J. McCABE, "A Complexity Measure," IEEE Transactions on Software Engineering, Vol.SE-2, pp.308-320, 1976. https://doi.org/10.1109/TSE.1976.233837

Cited by

  1. Robust Air-to-fuel Ratio Control Algorithm of Passenger Car Diesel Engines Using Quantitative Feedback Theory vol.21, pp.3, 2013, https://doi.org/10.7467/KSAE.2013.21.3.088
  2. Nonlinear Static Model-based Feedforward Control Algorithm for the EGR and VGT Systems of Passenger Car Diesel Engines vol.21, pp.6, 2013, https://doi.org/10.7467/KSAE.2013.21.6.135
  3. Nonlinear sliding mode observer for exhaust manifold pressure estimation in a light-duty diesel engine vol.15, pp.3, 2014, https://doi.org/10.1007/s12239-014-0040-8
  4. Dynamic Decoupler Design for EGR and VGT Systems in Passenger Car Diesel Engines vol.22, pp.2, 2014, https://doi.org/10.7467/KSAE.2014.22.2.182
  5. Air System Modeling for State Estimation of a Diesel Engine with Consideration of Dynamic Characteristics vol.22, pp.4, 2014, https://doi.org/10.7467/KSAE.2014.22.4.036
  6. Robust Air-to-Fuel Ratio and Boost Pressure Controller Design for the EGR and VGT Systems Using Quantitative Feedback Theory vol.22, pp.6, 2014, https://doi.org/10.1109/TCST.2014.2301160
  7. Common Rail Pressure Control Algorithm for Passenger Car Diesel Engines Using Quantitative Feedback Theory vol.38, pp.2, 2014, https://doi.org/10.3795/KSME-B.2014.38.2.107
  8. Development of Autonomous Car—Part I: Distributed System Architecture and Development Process vol.61, pp.12, 2014, https://doi.org/10.1109/TIE.2014.2321342
  9. Analysis of parallel processing effects through a co-processor in diesel engine management system vol.16, pp.5, 2015, https://doi.org/10.1007/s12239-015-0083-5
  10. Real-time empirical NOx model based on In-cylinder pressure measurements for light-duty diesel engines vol.17, pp.4, 2016, https://doi.org/10.1007/s12239-016-0055-4
  11. Resource-aware integration of AUTOSAR-compliant ECUs with an empirical wcet prediction model vol.17, pp.4, 2016, https://doi.org/10.1007/s12239-016-0071-4
  12. Gain-scheduled EGR control algorithm for light-duty diesel engines with static-gain parameter modeling vol.18, pp.4, 2017, https://doi.org/10.1007/s12239-017-0058-9
  13. A Study on Model-based Mode Management Development Process for AUTOSAR Compliant ECU vol.25, pp.1, 2017, https://doi.org/10.7467/KSAE.2017.25.1.116
  14. Nonlinear Compensators of Exhaust Gas Recirculation and Variable Geometry Turbocharger Systems using Air Path Models for a CRDI Diesel Engine vol.136, pp.4, 2013, https://doi.org/10.1115/1.4026075
  15. Exhaust Pressure Estimation Using a Diesel Particulate Filter Mass Flow Model in a Light-Duty Diesel Engine Operated With Dual-Loop Exhaust Gas Recirculation and Variable Geometry Turbocharger Systems vol.136, pp.11, 2014, https://doi.org/10.1115/1.4028018
  16. Fault Diagnosis of Exhaust Gas Recirculation and Variable Geometry Turbocharger Systems in a Passenger Car Diesel Engine Based on a Sliding Mode Observer for Air System States Estimation vol.136, pp.3, 2014, https://doi.org/10.1115/1.4026131
  17. Model-Based Gain Scheduling Strategy for an Internal Model Control-Based Boost Pressure Controller in Variable Geometric Turbocharger System of Diesel Engines vol.138, pp.3, 2016, https://doi.org/10.1115/1.4032283
  18. A Real-Time Combustion Control With Reconstructed In-Cylinder Pressure by Principal Component Analysis for a CRDI Diesel Engine vol.139, pp.6, 2017, https://doi.org/10.1115/1.4035395
  19. Fault Management System of LP-EGR Using In-Cylinder Pressure Information in Light-Duty Diesel Engines vol.140, pp.4, 2017, https://doi.org/10.1115/1.4038078
  20. Estimation of Intake Oxygen Concentration Using a Dynamic Correction State With Extended Kalman Filter for Light-Duty Diesel Engines vol.140, pp.1, 2017, https://doi.org/10.1115/1.4037390
  21. Emission Reduction Under Acceleration Conditions vol.140, pp.7, 2018, https://doi.org/10.1115/1.4038543
  22. Adaptation Strategy for Exhaust Gas Recirculation and Common Rail Pressure to Improve Transient Torque Response in Diesel Engines vol.19, pp.4, 2018, https://doi.org/10.1007/s12239-018-0055-7
  23. Iterative Learning Control Algorithm for Feedforward Controller of EGR and VGT Systems in a CRDI Diesel Engine vol.19, pp.3, 2018, https://doi.org/10.1007/s12239-018-0042-z