Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Shear Capacity of SAFE Friction Damper Using Break Pad of Automobile

자동차 브레이크용 마찰패드를 이용한 SAFE 마찰댐퍼의 전단내력 연구

  • 황인태 (고려대 건축사회환경공학과) ;
  • 이창환 (고려대 건축사회환경공학과) ;
  • 주영규 (고려대 건축사회환경공학과) ;
  • 김상대 (고려대 건축사회환경공학과)
  • Published : 2013.03.25
⟨ Previous Next ⟩

Abstract

Dissipating structural energy during an earthquake by damping devices is convenient and time-saving method to improve seismic performance of existing buildings. Friction damper is one of these damping devices and dissipates seismic energy through friction force created at the contact surface of solid bodies. As a damping device, friction damper has a great benefit because it behaves relatively stable and efficiently in the shape of a rectangular. Various types of friction damper has been developed and could be classified by its frictional material and working mechanism. Friction damper dealt in this paper uses brake pad developed for automobiles as a frictional material and acts in shear-type behavior. The Performance of brake pad for automobiles is modified with respect to durability and stability. Purpose of this study is to evaluate the performance of the friction damper when variables like initial temperature and sliding velocity are changed through experiment.

Keywords

References

  1. C. E. Grigorian et al, Slotted Bolted Connection Energy Dissipators, Report no UCB/EERC-92-10, College of Engineering, University of California, Berkeley, 1992
  2. R. Tremblay, S. F. Stiemer, Energy Dissipation Through Friction Bolted Connection in Concentrically Braced Steel Frames, ATC-17-1, p.557-568, 1993
  3. Imad H, Experimental Evaluation of New Friction Damper Device, 12th World Conference on Earthquake Engineering, 2000
  4. Serge Vezina, R. Tina Pall, Seismic Retrofit of MUCTC Building Using Friction Dampers, 13th World Conference on Earthquake Engineering, 2004
  5. E. Rabinowicz, Friction and wear of materials, 2nd ed., John Wiley & Sons, Inc, 1995
  6. C. Chrispopoulos, A. Filiatrault, Principle of Passive Supplemental Damping and Seismic Isolation, Iuss press
  7. K. Roik, U. Dorka, P. Dechent, Vibration Control of Structures Under Earthquake Loading by Three-Stage Friction-Grip Elements, Earthquake Engineering & Structural Dynamics, Earthquake Engineering & Structural Dynamics, Vol.16, Issue 4, p.501-521, 1988 https://doi.org/10.1002/eqe.4290160404
  8. T. F. FitzGerald et al, Slotted Bolted Connection in Aseismic Design for Concentrically Braced Connections, Earthquake Spectra, Vol.5, No.2, p.383-391, 1989 https://doi.org/10.1193/1.1585528
  9. Gael. Bondonet, Andre Filiatrault, Frictional Response of PTFE Sliding Bearings at High Frequencies, Journal of Bridge Engineer, p.139-148, 1997
  10. Imad H. Mualla, Borislav Belev, Performance of Steel Frames with a New Friction Damper Device under Earthquake Excitation, Engineering Structures, Vol.24, Issue 3, p.365-371, 2002 https://doi.org/10.1016/S0141-0296(01)00102-X
  11. T. Mikoshiba et al, Shaking table test of passive controlled structure with new friction damper, ASME Pressure Vessels and Piping Division Conference, ASME, p.163-169, 2007
  12. Masakazu Terai, Takanori Sato, Tomokazu Yoshioka, Koichi Minami, Studies of Bolted Frictional-Slippage Damper with Rubber Washer, 日本建築學會構造系論文集, p.107-114, 2007
  13. 강훈, 김상대, 중진지역 저층 RC 건축물의 지진피해에 관한 해석적 연구, 대한건축학회 학술발표대회 논문집, Vol.18, No.1, p.839-844, 1998
  14. 김현수, 최재혁, 전단형 마찰댐퍼의 이력특성에 관한 실험적연구, 한국강구조학회 학술대회 발표집, n.05, p.155-156, 2009
  15. 박은수, 최재혁, 제작스프링와셔를 사용한 전단형 마찰댐퍼의 도입장력 영향에 관한 실험적 연구, 대한건축학회논문집, Vol.28, n.08, p.21-32, 2012