Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Auto-moblie Gas Spring Structural Analysis Using of Bimetal

바이메탈을 이용한 자동차용 가스 스프링 구조해석에 관한 연구

  • 박철우 (한국과학기술정보연구원) ;
  • 김호윤 (현대제철(주) 중기생산부)
  • Received : 2012.11.01
  • Accepted : 2012.11.27
  • Published : 2013.02.15
Download PDF
⟨ Previous Next ⟩

Abstract

Gas springs have been widely used in motor vehicles as well as in most areas of industry. Instead of coil springs, these gas springs are easily operated to extrusion process or compression process the doors because $N_2$ gas with high pressure and oil are charged in tube. Gas spring sustain the constant elasticity change rate in the high reaction force and long stroke, and they have compact design, appearance and an excellent assembling ability to be mounted easily with any applicatory products. By means of these aspects, gas springs have been widely used in stead of coil springs in the over all industries. In this study, using acommonly used program, ANSYS, the basic research about the heat transfer and equivalent stress change of bimetal.

Keywords

References

  1. Kim, C. H., 2005, Numerical Study of the Operation in a Gas Spring, A Thesis for a Master, Inje University, Republic of Korea.
  2. Park, S. S., Bae, D. S., Lee, J. H., and Bae, D. H., 2007, "Development of New Bimetal Material for Home Appliances by using the Rolling Process," Transactions of Materials Processing, Vol. 16, No. 5, pp. 375-380. https://doi.org/10.5228/KSPP.2007.16.5.375
  3. Kim, Y. B., 1998, "A Study on the Optimal Design of Gas Spring for Vehicle," Journal of the KSPE, Vol. 15, No. 11, pp. 39-45.
  4. Lee, G. H., 2005, On the Computation of Gas Flows and Convective Heat Transfer in Gas Springs, A Thesis for a Master, Daejeon University, Republic of Korea. pp. 317-334.
  5. Kim, D. -T., Kim, D. -S., and Ju, M. -J., 2009, "A Study on the Design of a High-speed Pneumatic Cushion Cylinder," Journal of the Korean Society of Machine Tool Engineers, Vol. 18, No. 5, pp. 491-497.
  6. ANSYS, 2009, ANSYS User's Manual Version 10.0, ANSYS Inc.
  7. Kwon, H. -H., Song, S, -E., and Kim, O. -S., 2011, "Finite Element Analysis on the Cold Forging Process of the Unified Universal Shaft Joint for the Automobile," Korean Society of Manufacturing Technology Engineers, Vol. 20, No. 5, pp. 582-588.
  8. Han, M. S., Cho, J. U., 2011, "Structural Analysis of Excavator Arm and its Connection Pins," Korean Society of Manufacturing Technology Engineers, Vol. 20, No. 1, pp. 7-12.

Cited by

  1. A Study on the Reaction Force Characteristics of the Gas Spring for the Automotive vol.12, pp.4, 2015, https://doi.org/10.7839/ksfc.2015.12.4.035
  2. A optimized structural design of piston on moving in gas spring elevation working vol.16, pp.12, 2015, https://doi.org/10.5762/KAIS.2015.16.12.8274
  3. A study on the cross section in pipe type orifice of suitable piston rod moving in gas spring elevation working vol.16, pp.11, 2015, https://doi.org/10.5762/KAIS.2015.16.11.7745
  4. The development of gas seal lip technology on piston rod for reducing a friction force on moving gas spring elevation vol.16, pp.10, 2015, https://doi.org/10.5762/KAIS.2015.16.10.7166
  5. The volume compensation apparatus development of piston rod in compressed the moving of gas spring elevation vol.17, pp.4, 2015, https://doi.org/10.17958/ksmt.17.4.201508.809
  6. 가스 스프링 Elevation 동작 마찰력 보상 변수 조합 연구 (1) vol.18, pp.5, 2013, https://doi.org/10.5762/kais.2017.18.5.657