Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Displacement Ductility of Circular RC Column According to the Spacing of Spirals

나선철근 간격에 따른 원형 RC 기둥의 변위연성도

  • 고성현 (제주국제대학교 토목공학과)
  • Received : 2012.09.16
  • Accepted : 2012.12.14
  • Published : 2013.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

Eight small scale circular reinforced concrete columns (4.5 aspect ratio) were tested under cyclic lateral load with constant axial load. The selected test variables are longitudinal steel ratio (2.017%, 3.161%), transverse steel ratio, and axial load ratio (0, 0.07, 0.15). Volumetric ratio of spirals of all the columns is 0.335~0.894% in the plastic hinge region. It corresponds to 39.7~122.3% of the minimum requirement of confining steel by Korean Bridge Design Specifications, which represent existing columns not designed by the current seismic design specifications or designed by seismic concept. The final objectives of this study are to provide quantitative reference data and tendency for performance or damage assessment based on the performance levels such as cracking, yielding, steel fracture, etc. In this paper, describes mainly failure behavior, strength degradation behaviour, displacement ductility of circular reinforced concrete bridge columns with respect to test variables.

형상비 4.5인 축소모형 원형기둥 실험체 8개를 제작하여 일정한 축력 하에서 반복횡하중을 가력하는 실험을 수행하였다. 실험체의 주요변수는 횡방향철근비, 축방향철근비 (2.017%, 3.161%), 축력비 (0, 0.07, 0.15)이다. 모든 실험체의 횡방향 나선철근 체적비는 소성힌지 구간에서 0.3352~0.8938%의 값을 갖는다. 이 값은 도로교설계기준에서 요구하는 최소 심부구속철근 요구량의 39.7~122.3%에 해당하며, 이는 내진설계가 되지 않은 기존 교각이나 내진설계개념으로 설계되는 교각을 나타낸다. 본 연구의 최종목적은 실험적 기초자료의 제공과 함께 성능단계별 균열, 철근의 항복, 파단 등 정량적 수치와 경향을 제공하기 위한 것이다. 본 논문에서는 실험결과를 통해 분석된 실험변수에 따른 교각의 파괴거동, 강도저감거동, 변위연성도에 대해 중점적으로 기술하였다.

Keywords

References

  1. Chung. Y. S., Lee. J. H., Kim. J. K., "Experimental Study on the Evaluation of Seismic Performance of Existing Bridges of Highway Bridges", Report, 2001, Korea Expressway Corporation, p.397.
  2. Kim. G. W., "Nonlinear Analysis of Cycle Lateral Forced RC Shear Wall", vol. 14, No. 5, 2010, pp.161-168. (In Korean)
  3. Ko. S. H., Lee, J. H., "Low Cycle Fatigue Model for Longitudinal Reinforcement", Journal of the Korea Concrete Institute, vol. 22, No. 2, 2010, pp.273-282. (In Korean) https://doi.org/10.4334/JKCI.2010.22.2.273
  4. Ko. S. H., "Seismic Performance of Square RC Column Confined with Spirals", Journal of the Korea Concrete Institute for Structural Maintenance and Inspection", vol. 16, No. 5, 2012, pp.88-97. (In Korean) https://doi.org/10.11112/jksmi.2012.16.5.088
  5. Korean Ministry of Construction and Transportation, Korean Standard for Highway Bridges. Korean Society of Civil Engineers. Seoul, Korea, 1992, pp.1279-1388. (In Korean)
  6. Korean Road and Transportation Association, Korean Design Specifications for Highway Bridges, 2010. Seoul, Korea, pp.6-38. (In Korean)
  7. Lee, J. H., Ko. S. H., "Low Cycle Fatigue Behavior for Longitudinal Reinforcement", Journal of the Korea Concrete Institute, vol. 22, No. 2, 2010, pp.263-271. (In Korean) https://doi.org/10.4334/JKCI.2010.22.2.263
  8. Paulay T. and Priestley M. J. N, Seismic Design of Reinforced Concrete and Masonry Building, John Eiley & Sons, Inc., New York, 1992, p.142.
  9. Priestley, M. J. N., Seible, F. and Calvi, G. M., Seismic Design Retrofit of Bridges, John Willey and Sons, Inc., New York, 1996.
  10. Rao, K. B. S., Valsan, M., Sandhya, R., Ray, S. K., Mannan, S. L. and Rodriguez, P., "On the Failure Condition in Strain- Controlled Low Cyclic Fatigue," International Journal of Fatigue, vol. 7, No. 3, July 1985.
  11. Sim. J. I., Yang. K. H., "Influence of Anchorage of T-Plate on the Seismic Performance of RC Columns Strengthened with Unbonded Wire Rope Units", vol. 14, No. 1, 2010, pp.133-140. (In Korean)
  12. Youm. K. S., Lee. S. H., Lee. Y. H., Song. J. J., Hwang. Y. K., "Performance Evaluation of Scale-down Concrete Filled FRP Columns", vol. 13, No. 1, 2009, pp.135-144. (In Korean)

Cited by

  1. Seismic Performance and Flexural Over-strength of Circular RC Column vol.17, pp.5, 2013, https://doi.org/10.11112/jksmi.2013.17.5.049
  2. Evaluation of Ductility in Reinforced Concrete Members Using Material Models in Eurocode2 vol.35, pp.2, 2015, https://doi.org/10.12652/Ksce.2015.35.2.0287
  3. Failure Behavior of Octagonal Flared RC Columns Using Oblong Hoops vol.18, pp.3, 2014, https://doi.org/10.11112/jksmi.2014.18.3.058
  4. Failure Behavior of Hollow Circular RC Column According to the Spacing of Spirals vol.20, pp.6, 2016, https://doi.org/10.11112/jksmi.2016.20.6.046
  5. An Experimental Study on Strength and Ductility of Masonry Buildings Retrofitted by Metal Connectors vol.19, pp.3, 2015, https://doi.org/10.11112/jksmi.2015.19.3.113
  6. Seismic Performance of Octagonal Flared RC Columns using Oblong Hoops vol.19, pp.6, 2015, https://doi.org/10.11112/jksmi.2015.19.6.001
  7. 형상비 4.0인 비내진 철근콘크리트 기둥의 파괴거동 vol.24, pp.6, 2020, https://doi.org/10.11112/jksmi.2020.24.6.59