Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Adhesive Properties of High Flowable SBR-modified Mortar for Concrete Patching Material Dependent on Surface Water Ratio of Concrete Substrate

콘크리트 피착체의 표면수율에 따른 단면복구용 고유동성 SBR 개질 모르타르의 부착특성

  • 도정윤 (군산대학교 환경건설연구소) ;
  • 김두기 (군산대학교 토목공학과)
  • Received : 2012.11.29
  • Accepted : 2013.02.10
  • Published : 2013.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study investigated the effect of surface water on concrete substrate on adhesive strength in tension of very high flowable SBR-modified cement mortar. The specimens were prepared with proportionally mixing SBR latex, ordinary portland cement, silica sand, superplasticizer and viscosity enhancing agent. Polymer cement ratio (P/C) were 10, 20, 30, 50 and 75% and the weight ratio of fine aggregate to cement were 1:1 and 1:3. The specimens obtained with different P/C and C:F were characterized by unit weight, flow test, crack resistance and adhesion test. After basic tests, two mixtures of P/C=20% and 30% in case of C:F=1:1, and one mixture of P/C=50% in case of C:F=1:3 were selected, respectively. These three selected specimens were studied about the effect of surface water evenly sprayed on concrete substrate by a amount of 0, 0.006, 0.012, 0.017, 0.024g per unit area ($cm^2$) of concrete substrate surface The results show that surface water on concrete substrate increases the adhesive strength in tension of high flowable SBR-modified cement mortar and improve the flowability compared to the non-sprayed case.

본 연구에서는 고유동성의 SBR 개질 시멘트 모르타르의 기초적 성능을 바탕으로 콘크리트의 보수용 재료에 매우 중요한 요구성능인 부착강도에 대한 피착체의 표면에 존재하는 표면수량의 영향을 검토하는 연구가 수행하였다. 고유동성 SBR 개질 시멘트 모르타르의 기초적인 성능을 토대로 부착강도, 잔갈림성, 재료분리 저항성이 좋은 시험체를 선택하였다. 시험체는 C:F=1:1인 경우 P/C=20%, 30%의 시험체 2개, C:F=1:3인 경우 P/C=50%의 시험체 1개, 총 3개가 선택되었으며 이 3개의 배합에 대하여 피착체의 표면수량에 따른 고유동성 SBR 개질 시멘트 모르타르의 특성을 파악하였다. 표면수는 콘크리트 피착면의 단위 면적 ($cm^2$) 당 각각 0, 0.006, 0.012, 0.017, 0.024 g이 균등하게 살포되었으며, 이에 따른 연도변화, 플로우값, 부착강도, 부착파괴형상, 내균열성 및 재료분리여부를 파악하였다. 본 연구를 통해 콘크리트 피착체에 살포된 표면수는 고유동성 SBR 개질 시멘트 모르타르의 부착강도를 증진하는 효과가 있다는 결론을 얻었다.

Keywords

References

  1. ACI Committee 503, Guide for selection and use of structural adhesive with concrete, ACI Materials Journal, January 1993, vol. 89, Issue 1, pp.90-105.
  2. ACI Committee, State-of-the-Art Report on Polymer Modified Concrete, American Concrete Institute, ACI 548.3R-95, January 1995, pp.1-47.
  3. Afridi, M., Ohama, Y., Iqbal, M. Z. and Demura, K., "Water retention and adhesion of powdered and aqueous polymer-modified mortars", Cement and Concrete Composites, vol. 17, 1995, pp.113-118. https://doi.org/10.1016/0958-9465(95)00007-Y
  4. Aggarwal, L., Thapliyal, P., and Karade, S., "Properties of polymer-modified mortars using epoxy and acrylic emulsions", Construction and Building Materials, vol. 21, 2007, pp.379-383. https://doi.org/10.1016/j.conbuildmat.2005.08.007
  5. Barluenga, G. and Hernandez-Olivares, F., "SBR latex modified mortar rheology and mechanical behaviour", Cement and Concrete Research, vol. 34, 2004, pp.527-535. https://doi.org/10.1016/j.cemconres.2003.09.006
  6. Brocken, H. J. P., Spiekman, M., Pel, L., Kopinga, K., and Larbi, J., "Water extraction out of mortar during brick laying: a NMR study", Materials and structures, vol. 31, 1998, pp.49-57. https://doi.org/10.1007/BF02486414
  7. Chandra, S. and Ohama, Y., Polymers in Concrete, CRC Press, Boca Raton, Fla, 1994, pp.5-8.
  8. Do, J., Soh, Y., "Adhesive Strength in Tension of SBRModified Cement Mortar with Self-Flowability Material for Floor-Finishing", Journal of Korea Concrete Institute, vol. 15, No. 4, 2003a, pp.549-556. (In Korean with English abstract) https://doi.org/10.4334/JKCI.2003.15.4.549
  9. Do, J., Soh, Y., "Performance of polymer-modified self-leveling mortars with high polymer-cement ratio for floor finishing", Cement and Concrete Research, vol. 33, 2003b, pp.1497-1505. https://doi.org/10.1016/S0008-8846(02)01057-8
  10. Ohama, Y., Handbook of polymer-modified concrete and mortars: properties and process technology: William Andrew, 1995.
  11. Park, S., Kim J., "Study on Adhesive Strength of Polymer Modified Cement Mortar for Maintenance in Concrete Structure", The Journal of the Korea Institute for Structural Maintenance and Inspection, vol. 14, No. 2, 2010, pp.128-135. (In Korean with English abstract)
  12. Sakai, E. and Sugita, J., "Composite mechanism of polymer modified cement", Cement and Concrete Research, vol. 25, 1995, pp.127-135. https://doi.org/10.1016/0008-8846(94)00120-N
  13. Schulze, J., "Influence of water-cement ratio and cement content on the properties of polymer-modified mortars", Cement and Concrete Research, vol. 29, 1999, pp.909-915. https://doi.org/10.1016/S0008-8846(99)00060-5
  14. Song, H., Lee, C. and Min, C., "Effects of Admixtures in Properties of Polymer Cement Mortar for Concrete Repair, The Journal of the Korea Institute for Structural Maintenance and Inspection, vol. 11, No. 1, 2007, pp.85-94. (In Korean with English abstract)
  15. Wahby, W. S., Fifty years' history of polymer in concrete in Review, ACI International, Publication-SP 214-2, 2003, pp.13-14.

Cited by

  1. Effect of Substrate Surface Water on Adhesive Properties of High Flowable VA/VeoVa-modified Cement Mortar for Concrete Patching Material vol.17, pp.5, 2013, https://doi.org/10.11112/jksmi.2013.17.5.094