DOI QR코드

DOI QR Code

Safety Equipment System for Bicycle

자전거 안전 장치 시스템

  • Lee, Jeong-Ick (Dept. of Mechanical Design, Division of Mechanical Eng., INHA Technical College)
  • 이정익 (인하공업전문대학 기계공학부 기계설계과)
  • Received : 2013.02.24
  • Accepted : 2013.03.09
  • Published : 2013.03.31

Abstract

This paper is the product development of environment and safety. In growing society, the bicycle is need to have a common goals for consumers convenience and theft prevention. The bicycle is movable means. But as times passed, that bicycle is strongly recommended to replace other vehicles because that is not produced to air pollution and energy(gas, diesel etc) insufficiency. As workers using a bicycle are increased, road for only bicycle is made by additionary. The bicycles happens to several moving accidents such as car accidents because of signal mismatch between bicycle users. However, using the development products of this paper, many accident problems for bicycle can be solved. As increasing of bicycles numbers, the high cost bicycles are too increased. So, the more theft of bicycle is also happened. The developed products(turn signal system and theft prevention system) through this study kept your bicycles from more convenience and more safe.

본 연구는 자전거 안전 시스템 장치 개발에 관한 연구과제로 대상기술의 개요, 기술개발의 필요성 및 성공 시 파급효과, 기술개발의 목표, 개발방법, 기술개발 성공 시 판매 수출 등 사업화 방법, 시작품 성능 및 제원(speculation)에 대해 다음과 같은 연구 계획을 가지고 추진하였다. 대상기술(제품)의 개요는 이동시 안전운행을 위한 장치의 개발 및 고가의 자전거를 위한 보관 시 안전장치 개발에 있다. 기술개발의 필요성(기존의 애로사항 등) 및 성공 시 파급효과로는 자전거 보급 확대에 따른 이동량 증가에 따라 각종 안전사고 발생을 줄일 필요가 대두되었고, 욕구의 다양화로 고가의 자전거 보급이 늘어남에 따라 도난, 분실 등의 사고가 우려되어 개발하게 되었고, 안전사고를 미연에 방지하므로 부상치료, 재산손실에 대한 경제적 손실 억제하는 효과를 가지고 있다. 기술개발의 목표는 자전거 운행시 안전한 방향전환을 위한 시그널장치, LED 헤드라이트와 도난을 대비한 도난방지 시스템을 사용자가 별도의 도움 없이 혼자서 손쉽게 장착할 수 있는 장치를 개발하는데 있다.

Keywords

References

  1. 대판교통과학연구회 지음, 진장원 옮김, "교통안전학", 동화기술, pp. 48-58, 2007.
  2. 박주현,"민간경비실무론", 학문사, pp. 87-93, 2004.
  3. 김현숙, "도시계획", 광문각, pp.128-136, 2006.
  4. 남종하, "전기자전거용 고출력 리튬 배터리 팩 및 관리시스템", 대한전기학회 2009년도 제40회 하계학술대회, pp.1217-1218, 2009.
  5. 최재환, 김연성, 전의식, "자동차 탑재형 접이식 유모차의 메커니즘 설계", 한국산학기술학회 2008년도 추계학술발표논문집, pp.453-455, 2008.

Cited by

  1. Four-joint motion data based posture classification for immersive postural correction system vol.76, pp.9, 2017, https://doi.org/10.1007/s11042-016-3299-0
  2. An efficient approach for obtaining 3D surface curvature using blocked pattern projection vol.75, pp.23, 2016, https://doi.org/10.1007/s11042-015-2902-0
  3. Comparative Study of Human Age Estimation with or without Preclassification of Gender and Facial Expression vol.2014, 2014, https://doi.org/10.1155/2014/905269
  4. Traversable Ground Surface Segmentation and Modeling for Real-Time Mobile Mapping vol.10, pp.4, 2014, https://doi.org/10.1155/2014/795851
  5. Real-time single camera natural user interface engine development vol.76, pp.9, 2017, https://doi.org/10.1007/s11042-015-2986-6
  6. Image classification using label constrained sparse coding vol.75, pp.23, 2016, https://doi.org/10.1007/s11042-015-2626-1
  7. Novel Intermode Prediction Algorithm for High Efficiency Video Coding Encoder vol.2014, 2014, https://doi.org/10.1155/2014/196035