Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Strength Analysis of Composite Double-lap Bolted Joints by Progressive Failure Theory Based on Damage Variables

손상변수기반 점진적 파손이론을 이용한 복합재 이중 겹침 볼트 체결부의 강도 해석

  • 김상국 (한국항공우주산업(주)) ;
  • 권진회 (경상대학교 항공우주시스템공학과/항공기부품기술연구소)
  • Received : 2012.12.05
  • Accepted : 2013.03.28
  • Published : 2013.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

A three-dimensional finite analysis method was proposed to predict the failure of composite double-lap bolted joints, which is based on the stiffness degradation method using damage variables and Hashin's three-dimensional failure criteria. Ladeveze's theory using damage variables to consider the matrix/shear damage was combined with stiffness degradation in fiber direction. Four different failure modes were considered including matrix compression/shear, matrix tension/shear, fiber compression, and tension failures. The friction between bolt and composite and the clamping force were considered using a commercial finite element software ABAQUS. The damage model was incorporated using the user-defined subroutine of the software. The predicted result was verified with the existing test result for bearing tension double shear and showed the deviation ranging 7~16% from test results.

복합재 이중-겹침 볼트 체결부의 파손을 예측하기 위해 손상계수를 고려한 강성저하 방법과 Hashin의 3차원 파손판정식에 근거한 3차원 유한요소해석 방법을 제안하였다. 기지 혹은 면내(In-plane) 전단 손상을 고려하기 위해 손상변수를 이용하는 Ladeveze 이론을 섬유방향 강성저하와 연계하여 사용하였고, 수지 압축/전단, 수지 인장/전단, 섬유압축, 섬유 인장 등 4가지 파손모드를 고려하였다. 상업용 유한요소 프로그램인 ABAQUS를 이용하여 마찰력과 볼트 체결력을 고려하였고, 강성저하모델 처리를 위해 ABAQUS의 사용자 정의 부프로그램을 이용하였다. 제안된 유한요소해석 방법을 검증하기 위해 복합재 이중겹침 볼트 체결부 시험 결과와 파손강도를 비교한 결과 7~16% 오차를 보임을 확인하였다.

Keywords

References

  1. Eisenmann, J.R., and Roussean, C.Q., "IBOLT: A Composite Bolted Joint Static Strength Prediction Tool," Joining and Repair of Composite Structures, ASTM STP 1455, ASTM International.
  2. Ahn, H.S., Kweon, J.H., and Choi, J.H., "A New Method to Determine the Characteristic Lengths for the Failure Analysis of Composite Joint," Journal of the Korean Society for Composite Materials, Vol. 16, No. 4, 2003, pp. 10-21.
  3. Chang, F.K., and Scott, R.A., "Strength of Mechanically Fastened Composite Joints," Journal of Composite Materials, Vol. 16, 1982, pp. 470-494. https://doi.org/10.1177/002199838201600603
  4. Manalo, A., and Mutsuyoshi, H., "Behavior of Fiber-reinforced Composite Beams with Mechanical Joints," Journal of Composite Materials, Vol. 46, 2011, pp. 483-496.
  5. Wang, H.S., Hung, C.L., and Chang, F.K., "Bearing Failure of Bolted Composite Joints. Part I : Experimental Characterization," Journal of Composite Materials, Vol. 30, No. 12, 1996, pp. 1284-1313. https://doi.org/10.1177/002199839603001201
  6. Hung, C.L., and Chang, F.K., "Bearing Failure of Bolted Composite Joints. Part II : Model and Verification," Journal of Composite Materials, Vol. 30, No. 12, 1996, pp. 1359-1400. https://doi.org/10.1177/002199839603001204
  7. Hung, C.L., and Chang, F.K., "Strength Envelope of Bolted Composite Joints under Bypass Loads," Journal of Composite Materials, Vol. 30, No. 13, 1996, pp. 1402-1435. https://doi.org/10.1177/002199839603001301
  8. Hashin, Z., "Failure Criteria for Uni-directional Fiber Composites," Journal of Applied Mechanics, Vol. 47, 1980, pp. 329-334. https://doi.org/10.1115/1.3153664
  9. Kweon, J.H., Shin, S.Y., and Choi, J.H., "A Two-dimensional Progressive Failure Analysis of Pinned Joints in Uni-directional- Fabric Laminated Composites," Journal of Composite Materials, Vol. 41, 2007, pp. 2083-2104. https://doi.org/10.1177/0021998307074131
  10. McCarthy, C.T., McCarthy, M.A., and Lawlor, V.P., "Progressive Damage Analysis of Multi-Bolt Composite Joints with Variable Bolt-Hole Clearance," Composites Part B : Engineering, Vol. 36, 2005, pp. 290-305. https://doi.org/10.1016/j.compositesb.2004.11.003
  11. McCarthy, M.A., and McCarthy, C.T., "Finite Element Analysis of the Effects of Clearance on Single-shear, Composite Bolted Joints," Plast, Rubber Compos, Vol. 32, No. 2, 2002, pp. 65-70.
  12. Tserpes, K.I., Labeas, G., Papanikos, P., and Kermanidis, Th., "Strength Prediction of Bolted Joints in Graphite /Epoxy Composite Laminates," Composites Part B: Engineering, Vol. 33, 2002, pp. 521-529. https://doi.org/10.1016/S1359-8368(02)00033-1
  13. Camanho, P.P., and Matthews, F.L., "A Progressive Damage Model for Mechanically Fastened Joints in Composite Laminates," Journal of Composite Materials, Vol. 33, No. 24, 1999, pp. 2248- 2280. https://doi.org/10.1177/002199839903302402
  14. Sun, H.T., Qing, X., and Chang, F.K., "The Response of Composite Joints with Bolt- clamping Loads, Part I:Model Development," Journal of Composite Materials, Vol. 36, No. 1, 2002, pp. 47-67. https://doi.org/10.1177/0021998302036001301
  15. Sun, H.T., Qing, X., and Chang, F.K., "The Response of Composite Joints with Bolt- clamping Loads, Part II : Model Verfication," Journal of Composite Materials, Vol. 36, No. 1, 2002, pp. 69-91. https://doi.org/10.1177/0021998302036001302
  16. Ladeveze, P., and Dantec, E.L., "Damage Modelling of the Elemmentary Ply for Laminated Composites," Composites Science and Technology, Vol. 43, 1992, pp. 257-267. https://doi.org/10.1016/0266-3538(92)90097-M
  17. ABAQUS 6.7 User's Manual, Simulia, Inc., 2007.
  18. Hearakovich, C.T., Mechanics of Fibrous Composites, John Wiley & Sons, Inc., 1998.
  19. Tomblin, J., and Seneviratne, W., Laminate Statistical Allowable Generation for Fiber-reinforced Composite Materials: Lamina Variability Method, DOT/FAA/AR- 06/53, 2009.
  20. ASTM D3518, Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ${\pm}45^{\circ}$ Laminate.

Cited by

  1. Strength Prediction on Composite Laminates Including Material Nonlinearity and Continuum Damage Mechanics vol.42, pp.11, 2014, https://doi.org/10.5139/JKSAS.2014.42.11.927
  2. A Study on the Evaluation of Fiber and Matrix Failures for Laminated Composites using Hashin·Puck Failure Criteria vol.52, pp.2, 2015, https://doi.org/10.3744/SNAK.2015.52.2.143
  3. Crack Band Model 기반 손상변수를 이용한 탄소섬유강화 복합재료 적층판의 점진적 파손 거동 예측 및 검증 vol.32, pp.5, 2013, https://doi.org/10.7234/composres.2019.32.5.258