DOI QR코드

DOI QR Code

Steel fibre reinforced concrete for elements failing in bending and in shear

  • Barros, Joaquim A.O. (ISISE, Dept. of Civil Engineering, Univ. of Minho) ;
  • Lourenco, Lucio A.P. (ISISE, Dept. of Civil Engineering, Univ. of Minho) ;
  • Soltanzadeh, Fatemeh (ISISE, Dept. of Civil Engineering, Univ. of Minho) ;
  • Taheri, Mahsa (ISISE, Dept. of Civil Engineering, Univ. of Minho)
  • 투고 : 2012.10.30
  • 심사 : 2012.12.20
  • 발행 : 2013.03.25

초록

Discrete steel fibres can increase significantly the bending and the shear resistance of concrete structural elements when Steel Fibre Reinforced Concrete (SFRC) is designed in such a way that fibre reinforcing mechanisms are optimized. To assess the fibre reinforcement effectiveness in shallow structural elements failing in bending and in shear, experimental and numerical research were performed. Uniaxial compression and bending tests were executed to derive the constitutive laws of the developed SFRC. Using a cross-section layered model and the material constitutive laws, the deformational behaviour of structural elements failing in bending was predicted from the moment-curvature relationship of the representative cross sections. To evaluate the influence of the percentage of fibres on the shear resistance of shallow structures, three point bending tests with shallow beams were performed. The applicability of the formulation proposed by RILEM TC 162-TDF for the prediction of the shear resistance of SFRC elements was evaluated. Inverse analysis was adopted to determine indirectly the values of the fracture mode I parameters of the developed SFRC. With these values, and using a softening diagram for modelling the crack shear softening behaviour, the response of the SFRC beams failing in shear was predicted.

키워드

참고문헌

  1. Barragan, B.E. (2002), "Failure and tougness of steel fiber reinforced concrete under tension and shear", PhD Thesis, Universitat Politecnica de Catalunya (UPC) Bercelonatech, Barcelona, March.
  2. Barros, J.A.O. (1995), "Behaviour of fibre reinforced concrete . experimental analysis and numerical simulation", PhD Thesis, Dep. Civil Eng., Faculty of Eng., Porto University, 502 (in Portuguese).
  3. Barros, J.A.O. and Figueiras, J.A. (1998), "Experimental behaviour of fiber concrete slabs on soil", J. Mech. Cohesive-frictional Mater., 3(3), 277-290.
  4. Barros, J.A.O. and Figueiras, J.A. (1999), "Flexural behavior of steel fiber reinforced concrete: testing and modelling", J. Mater. Civil Eng.- ASCE, 11(4), 331-339. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(331)
  5. Barros, J.A.O., Gettu, R. and Barragan, B.E. (2004), "Material nonlinear analysis of steel fibre reinforced concrete beams failing in shear", Proceeding of 6th International RILEM Symposium on fibre reinforced concrete - BEFIB 2004, Edts. M. di Prisco, R. Felicetti, G.A. Plizarri, 1, 711-720.
  6. Barros, J.A.O., Cunha, V.M.C.F., Ribeiro, A.F. and Antunes, J.A.B. (2005), "Post-cracking behaviour of steel fibre reinforced concrete", RILEM Mater. Struct. J., 38(275), 47-56. https://doi.org/10.1007/BF02480574
  7. Barros, J.A.O. and Fortes, A.S. (2005), "Flexural strengthening of concrete beams with CFRP laminates bonded into slits", Cement Concrete Comp., 27(4), 471-480. https://doi.org/10.1016/j.cemconcomp.2004.07.004
  8. Barros, J.A.O., Pereira, E.B. and Santos, S.P.F. (2007), "Lightweight panels of steel fiber reinforced selfcompacting concrete", J. Mater. Civil Eng., 19(4), 295-304. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:4(295)
  9. Barros, J.A.O., di Prisco, M. and di Prisco, C. (2009), "Modelling FRC infrastructures taking into account the soil-structure interaction", Conference on the Numerical Methods in Engineering, Barcelona.
  10. Bazant, Z.P. and Oh, B.H. (1983), "Crack band theory for fracture of concrete", Mater. Struct., 16(93), 155-177.
  11. Brite Euram / Swedish Cement and Concrete Research Institute, (2002), Brite-euram. Rational Production and Improved Working Environment through using Self Compacting Concrete - Brite-Euram project, BRPR-CT96-0366, Technical report.
  12. Casanova, P. (1995), "Betons de fibres metalliques: du materiaux a la structure", PhD Thesis, Ecole Nationale des Ponts et Chaussees, (in French).
  13. Casanova, P., Rossi, P. and Schaller, I. (2000), "Can steel fibres replace transverse reinforcement in reinforced concrete beams?", ACI Mater. J., 94(5), 341-354.
  14. CEB-FIP Model Code (1993), Comite Euro-International du Beton, Bulletin d'Information, 213/214.
  15. Chiaia, B., Fantilli, A.P. and Vallini, P. (2009), "Evaluation of crack width in FRC structures and application to tunnel linnigs", J. Mater. Struct., 43(3), 339-351.
  16. de Borst, R. (2002), "Fracture in quasi-brittle materials: a review of continuum damage-based approaches", Eng. Fract. Mech., 69(2), 95-112. https://doi.org/10.1016/S0013-7944(01)00082-0
  17. di Prisco, M., Felicetti, R. and Plizzari, G.A. (2004), "Precast SFRC elements: from material properties to structural applications", Proceeding of 6th RILEM Symposium on Fibre-Reinforced Concretes (FRC)-BEFIB, Varenna, Italy.
  18. Divakar, M.P., Fafitis, A. and Shah, S.P. (1987), "Constitutive model for shear transfer in cracked concrete", J. Struct. Eng.-ASCE, 113(5), 1047-1062.
  19. EFNARC (2002), Specification and guidelines for self-compacting concrete, ISBN: 0 9539733 4 4, 32.
  20. EN197-1:2000 (2000), Cement, composition, specifications and conformity criteria for low heat common cements, ISBN: 058036456 9, 52.
  21. EFNARC (1996), European federation of producers and applications of specialist products for structures, European Specification for Sprayed concrete, Loughborough University.
  22. Eurocode 2. (2004), Design of concrete structures - Part 1-1: General rules and rules for buildings, Comite Europeen de Normalisation (CEN), EN 1992-1-1:2004: E, Brussels.
  23. Gettu, R., Barragan, B., Garcia, T., Ramos, G., Fernandez, C. and Oliver, R. (2004), "Steel fiber reinforced concrete for the barcelona metro line 9 tunnel lining", Proceeding of 6th RILEM Symposium on Fibre-Reinforced Concretes (FRC). BEFIB, Varenna, Italy. (Invited lecturer)
  24. Meda, A., Minelli, F., Plizzari, G.A. and Riva, P. (2005), "Shear behaviour of steel fibre reinforced concrete beams", J. Mater. Struct., 38(3), 343-353. https://doi.org/10.1007/BF02479300
  25. Naaman, A.E. and Reinhard, H.W. (2005), "Proposed classification of HPFRC composites based on their tensile response", Proceedings of 3rd international Conference on Construction materials, Performance, Innovations and Structural Implications (ConMat'05) and Mindess Symposium, 458, Eds, N., Banthia, A.B., T.Uomoto and Shah, S., University of British Columbia, Vancouver, Canada.
  26. Nooru, M.B.-Mohamed (1992), "Mixed-mode fracture of concrete: an experimental approach", PhD Thesis, Delft University of Technology.
  27. Okamura, H. (1997), "Ferguson lecture for 1996: Self-compacting high-performance concrete", Concrete Int. ACI, 19(7), 50-54.
  28. Pereira, E.N.B. (2006), "Steel fibre reinforced self-compacting concrete: from material to mechanical behaviour", dissertation for Pedagogical and Scientific Aptitude Proofs, Department Civil Engineering, University of Minho, 188, http://www.civil.uminho.pt/composites.
  29. Pereira, E.B., Barros, J.A.O. and Camoes, A.F.F.L. (2008), "Steel fiber reinforced self-compacting concrete . experimental research and numerical simulation", J. Struct. Eng., 134(8), 1310-1321. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:8(1310)
  30. Pereira, E.B., Fischer, G., Barros, J.A.O. and Lepech, M. (2010), "Crack formation and tensile stress-crack opening behavior of fiber reinforced cementitious composites (SHCC)", Proceedings of FraMCoS-7, Eds: B. H. Oh, O. C. Choi & L. Chung, Jeju, Korea.
  31. prEN 1992-1-1, Eurocode 2: Design of concrete structures - Part 1, (2002), General rules and rules for buildings, April.
  32. RILEM TC 162-TDF (2003), "Test and design methods for steel fibre reinforced concrete-${\sigma}-{\epsilon}$ design method - Final recommendation", Mater. Struct., 36, 560-567.
  33. Roshani, D. (1996), "Shear capacity of steel fiber reinforced concrete beams", MSc Thesis, Goteborg University.
  34. Rots, J.G. and de Borst, R. (1987), "Analysis of mixed mode fracture in concrete", J. Eng. Mech.-ASCE, 113(11), 1739-1758. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:11(1739)
  35. Schellekens, J.C.J. (1990), "Interface elements in finite element analysis", Report, No. 25 2 90-5 17 (TUDelft), Delft University of Technology, The Netherlands, 82.
  36. Sena-Cruz, J.M., Barros, J.A.O., Ribeiro, A.F., Azevedo, A.F.M. and Camoes, A.F.F.L. (2004), "Stresscrack opening relationship of enhanced performance concrete", 9th Portuguese Conference on Fracture, ESTSetubal, Portugal, 395-403.
  37. Sena Cruz, J.M. (2004), "Strengthening of concrete structures with near-surface mounted CFRP laminate strips", PhD Thesis, Dep. Civil Eng., University of Minho, http://www.civil.uminho.pt/composites.
  38. Soranakom, C. and Mobasher, B. (2008), "Correlation of tensile and flexural response of strain softening and strain hardening cement composites", Cement Concrete Comp., 30, 465-477. https://doi.org/10.1016/j.cemconcomp.2008.01.007
  39. Soranakom, C. (2008), "Multi scale modeling of fibre and fabric reinforced cement based composites", PhD thesis, Arizona State University.
  40. Swamy, R.N. and Al-Ta'An, S.A. (1981), "Deformation and ultimate strength in flexure of reinforced concrete beams made with steel fibre concrete", ACI J. Proc., 78(5), 395-405.
  41. Taheri, M., Barros, J.A.O. and Salehian, H. (2010), "A design model for strain-softening and strainhardening fiber reinforced elements reinforced by longitudinal steel bars failing in bending - implementation and parametric studies", Technical report 10-DEC/E-06, Dep. Civil Eng., School Eng. University of Minho.
  42. Vandewalle, L. (2000), "Cracking behaviour of concrete beams reinforced with a combination of ordinary reinforcement and steel fibers", J. Mater. Struct., 33(3), 339-351.

피인용 문헌

  1. High performance fibre reinforced cement concrete slender structural walls vol.2, pp.4, 2014, https://doi.org/10.12989/acc.2014.2.4.309
  2. Modelling the flexural behaviour of fibre reinforced concrete beams with FEM vol.99, 2015, https://doi.org/10.1016/j.engstruct.2015.05.028
  3. Shear and impact strength of waste plastic fibre reinforced concrete vol.5, pp.2, 2013, https://doi.org/10.12989/acc.2017.5.2.173
  4. Behaviour of hybrid fibre reinforced concrete beams strengthened with GFRP laminates vol.66, pp.5, 2013, https://doi.org/10.12989/sem.2018.66.5.631
  5. Fracture behaviors of tunnel lining caused by multi-factors: A case study vol.8, pp.4, 2013, https://doi.org/10.12989/acc.2019.8.4.269
  6. Algorithms to measure carbonation depth in concrete structures sprayed with a phenolphthalein solution vol.9, pp.3, 2013, https://doi.org/10.12989/acc.2020.9.3.257
  7. Shear strength and deformation of steel fibre-reinforced concrete beams after fire vol.10, pp.2, 2020, https://doi.org/10.12989/acc.2020.10.2.105