Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Review of design parameters for FRP-RC members detailed according to ACI 440.1R-06

  • Jnaid, Fares (Department of Civil and Environmental Engineering, Syracuse University) ;
  • Aboutaha, Riyad (Department of Civil and Environmental Engineering, Syracuse University)
  • Received : 2011.10.19
  • Accepted : 2012.05.10
  • Published : 2013.02.25
⟨ Previous Next ⟩

Abstract

This paper investigates the parameters that control the design of Fiber Reinforced Polymer (FRP) reinforced concrete flexural members proportioned following the ACI 440.1R-06. It investigates the critical parameters that control the flexural design, such as the deflection limits, crack limits, flexural capacity, concrete compressive strength, beam span and cross section, and bar diameter, at various Mean-Ambient Temperatures (MAT). The results of this research suggest that the deflection and cracking requirements are the two most controlling limits for FRP reinforced concrete flexural members.

Keywords

References

  1. Aboutaha, R. (2004), "Guide for maintenance, and rehabilitation of concrete bridge components with FRP composites - research into practice", Syracuse University, Syracuse, NY, U.S.A.
  2. Aboutaha, R. (2006), "Evaluation and certification of GFRP bars ComBAR tests with respect to the requirements of the ACI 440.3R-04 Report", Syracuse University, Syracuse, NY, U.S.A.
  3. ACI 440.1R-06, (2006), "Guide for the design and construction of structural concrete reinforced with FRP bars", American Concrete Institute (ACI).
  4. ACI 318-05 and ACI 318R-05, (2005), "Building code requirement for structural concrete and commentary", American Concrete Institute (ACI).
  5. Adimi, R., Rahman, H., Benmokrane, B. and Kobayashi, K. (1998), "Effect of temperature and loading frequency on the fatigue life of a CFRP bar in concrete", Proceedings of the Second International Conference on Composites in Infrastructure (ICCI-98), Tucson, Ariz., 2, 203-210.
  6. American Composites Manufacturers Association, (2004), "ABC's of FRP", 1010 N. Glebe Road, Suite 450 Arlington, VA 22201.
  7. Ando, N., Matsukawa, H., Hattori, A. and Mashima, A. (1997), "Experimental studies on the long term tensile properties of FRP tendons", Proceedings of the Third International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), 2, Japan Concrete Institute, Tokyo, Japan, 203-210.
  8. Bischoff, P.H. (2005), "Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars", J. Struct. Eng., 131(5), 752-767. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:5(752)
  9. Bischoff, P.H. (2007a), "Deflection calculations of FRP reinforced concrete beams based on modifications to the existing Branson equation", J. Compos. Constr., 11(1), 4-14. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:1(4)
  10. Bischoff, P.H. (2007b), "Rational model for calculating deflection of reinforced concrete beams and slabs", Can. J. Civil Eng., 34(8), 992-1002. https://doi.org/10.1139/l07-020
  11. Bischoff, P.H., Gross, S. and Ospina, C.E. (2009), "The story behind proposed changes to ACI 440 deflection requirements for FRP-reinforced concrete", American Concrete Institute, ACI Special Publication (264 SP), 53-76.
  12. Bischoff, P.H. and Gross, S.P. (2011), "Equivalent moment of inertia based on integration of curvature", J. Compos. Constr., 15(3), 263-273. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000164
  13. Bischoff, P.H. and Gross, S.P. (2011), "Design approach for calculating deflection of FRP-reinforced concrete", J. Compos. Constr., 15(4), 490-590. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000195
  14. Bootle, J., Burzesi, F. and Fiorini, L. (2001), "Design guidelines", ASM Handbook, 21, Composites, ASM International, Material Park, Ohio, 388-395.
  15. Branson, D.E. (1977), Deformation of concrete structures, McGraw-Hill Book Co., New York, 546.
  16. Brown, V. (1997), "Sustained load deflections in GFRP reinforced concrete beams", Proceedings of the Third International Symposium on Non-Metallic (FRP) reinforcement for Concrete Structures (FRPRCS- 3), 2, Japan Concrete Institute, Tokyo, Japan, 495-502.
  17. Chang, K.K. (2001), "Aramid fibers", ASM Handbook, 21, Composites, ASM International, Material Park, Ohio, 41-45.
  18. Ehsani, M.R. (1993), "Glass-fiber reinforcing bars", Alternative Materials for the Reinforcement and Prestressing of Concrete, J. L. Clarke, Blackie Academic & Professional, London, 35-54.
  19. Freimanis, A.J., Bakis, C.E., Nanni, A. and Gremel, D. (1998), "A comparison of pullout and tensile behaviors of FRP reinforcement for concrete", Proceedings of the Second International Conference on Composites in Infrastructure (ICCI-98), 2, Tucson, Ariz., 52-65.
  20. Gao, D., Benmokrane, B. and Masmoudi, R. (1998a), "A calculating method of flexural properties of FRPreinforced concrete beam: Part 1: Crack width and deflection", Technical Report, Department of Civil Engineering, University of Sherbrooke, Sherbrooke, Quebec, Canada, 24.
  21. Jaeger, L.G., Mufti, A. and Tadros, G. (1997), "The concept of the overall performance factor in rectangular-section reinforced concrete beams", Proceedings of the Third International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), 2, Japan Concrete Institute, Tokyo, Japan, 551-558.
  22. Kocaoz, S., Samaranayake, V.A. and Nanni, A. (2005), "Tensile characterization of glass FRP bars", Compos. Part B, 36(1), 127-134. https://doi.org/10.1016/j.compositesb.2004.05.004
  23. Mallick, P.K. (1988), Fiber reinforced composites, materials, manufacturing, and design, Marcell Dekker, Inc., New York, 469.
  24. Mutsuyoshi, H., Uehara, K. and Machida, A. (1990), "Mechanical properties and design method of concrete beams reinforced with carbon fiber reinforced plastics", Transaction of the Japan Concrete Institute, 12, Japan Concrete Institute, Tokyo, Japan, 231-238.
  25. Nucciarelli, B. (2007), "The controlling flexural limit states for GFRP reinforced concrete beams designed according to the ACI 440.1R-06 recommendations", Syracuse University, NY, USA.
  26. Ospina, C.E. and Nannii, A. (2007), "Current FRP-reinforced concrete design trends in ACI 440.1R", University of Patras, Patras, Greece.
  27. Ospina, C.E., Alexander, S. and Cheng, J.J. (2001), "Behavior of concrete slabs with fibre-reinforced polymer reinforcement", Structural Engineering Report No. 242, Department of Civil and Environmental Engineering, University of Alberta, 355.
  28. Ospina, C.E. and Gross, S.P. (2005), "Rationale for the ACI 440.1R-06 indirect deflection control design provisions", Proceedings, 7th Intl. Symposium on FRP Reinforcement for Concrete Structures, Kansas City, USA, 651-670.
  29. Shield, C.K., Galambos, T.V. and Gulbrandsen, P. (2011), "On the history and reliability of the flexural strength of FRP reinforced concrete members in ACI 440.1R", 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-10), Tampa, Florida, USA.
  30. Theriault, M. and Benmokrane, B. (1998), "Effects of FRP reinforcement ratio and concrete strength on flexural behavior of concrete beams", J. Compos. Constr., 2(1), 7-16. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:1(7)
  31. Veysey, S. and Bischoff, P.H. (2011), "Designing FRP reinforced concrete for deflection control", 10th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS- 10), Tampa, Florida, USA.
  32. Wallenberger, F.T., Watson, J.C. and Hong, L. (2001), "Glass fibers", ASM Handbook, 21, Composites, ASM International, Material Park, Ohio, 27-34.
  33. Walsh, P.J. (2001), "Carbon fibers", ASM Handbook, 21, Composites, ASM International, Material Park, Ohio, 35-40.
  34. Wu, W.P. (1990), "Thermomechanical properties of fiber reinforced plastic (FRP) bars", PhD dissertation, West Virginia University, Morgantown, W.Va., 292.
  35. Zheng, Y., Li, C. and Yu, G. (2012), "Behavior of laterally restrained GFRP reinforced concrete slab", The Third Asia-Pacific Conference on FRP in Structures (APFIS 2012), Hokkaido University, Japan.

Cited by

  1. Weight minimum design of concrete beam strengthened with glass fiber reinforced polymer bar using genetic algorithm vol.19, pp.2, 2017, https://doi.org/10.12989/cac.2017.19.2.127
  2. GMDH-based prediction of shear strength of FRP-RC beams with and without stirrups vol.22, pp.2, 2013, https://doi.org/10.12989/cac.2018.22.2.197