Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

RBDO of Coil Spring Considering Transversal Direction Mode Tracking

횡방향 모드추적을 고려한 코일스프링의 신뢰성기반 최적설계

  • Received : 2012.12.28
  • Accepted : 2013.04.02
  • Published : 2013.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

When the values of design variables change, mode switching can often occur. If the mode of interest is not tracked, the frequencies and modes for design optimization may be miscalculated owing to modes that differ from the intended ones. Thus, mode tracking must be employed to identify the frequencies and modes of interest whenever the values of design variables change during optimization. Furthermore, reliability-based design optimization (RBDO) must be performed for design problems with design variables containing uncertainty. In this research, we perform RBDO considering the mode tracking of a compressive coil spring, i.e., a component of the joint spring that supports a compressor, with design variables containing uncertainty by using only kriging metamodels based on multiple responses approach (MRA) without existing mode tracking methods. The reliability analyses for RBDO are employed using kriging metamodel-based Monte Carlo simulation.

구조물의 최적설계 시 설계변수의 값이 변화할 때 모드전환이 일어날 수 있다. 만약 이 모드전환을 추적하지 않으면 최적설계를 위한 고유진동수나 모드는 설계자가 의도하지 않은 모드로 평가될 수 있다. 따라서 설계변수의 값이 변화할 때마다 의도한 고유진동수와 모드의 동일성을 유지할 수 있도록 모드추적이 적용되어야 한다. 또한 설계변수가 불확실성을 포함하고 있는 설계 문제의 경우, 이를 고려한 신뢰성 기반 최적설계를 수행해야 한다. 본 연구에서는 압축기를 지지하는 관절스프링의 한 부품인 압축 코일스프링의 모드추적을 고려한 신뢰성기반 최적설계를 수행한다. 모드추적 기법은 최적화 기법들과 연동이 쉬운 다중응답접근법 기반 크리깅 메타모델을 이용하며, 신뢰성해석 기법은 크리깅 메타모델 기반 몬테카를로 추출법을 이용한다.

Keywords

References

  1. EIdred, M. S., Venkayya, V. B. and Anderson, W. J., 1995, "Mode Tracking Issues in Structural Optimization," AIAA Journal, Vol. 33, No. 10, pp. 1926-1933. https://doi.org/10.2514/3.12747
  2. Lee, T.H., Lee, C.J. and Lee, K.K., 2003, "Shape Optimization of a CRT based on Response Surface and Kriging Metamodels," Trans. Korean Soc. Mech. Eng. A, Vol. 27, No. 30, pp. 381-386. https://doi.org/10.3795/KSME-A.2003.27.3.381
  3. Simpson, T.W., Mauery, T.M., Korte, J.J. and Mistree, F., 2001, "Kriging Models for Global Approximation in Simulation-Based Multidisciplinary Design Optimization," AIAA Journal, Vol. 39, No. 12, pp. 2234-2241.
  4. Krige, D.G., 1951, "A Statistical Approach to Some Basic Mine Valuation Problems on the Witwatersrand," Journal of the Chemical, Metallurgical and Mining Society of South Africa, Vol. 52, No. 6, pp. 119-139.
  5. Matheron, G., 1963, "Principles of Geostatistics," Economic Geology, Vol. 58, No. 8, pp. 1246-1266. https://doi.org/10.2113/gsecongeo.58.8.1246
  6. Sacks, J., Welch, W.J., Mitchell, T.J. and Wynn, H.P., 1989, "Design and Analysis of Computer Experiments," Statistical Science, Vol. 4, No.4, pp. 409-435. https://doi.org/10.1214/ss/1177012413
  7. Phaedon, C.K. and Andre, G.J., 1999, "Geostatistical Space-Time Models: A Review," Mathematical Geology, Vol. 31, No. 6, pp. 651-684. https://doi.org/10.1023/A:1007528426688
  8. Lee, J.M. and Lee, T.H., 2010, "Statistical Space- Time Metamodels based on Multiple Responses Approach for Time-Variant Dynamic Response of Structures," Trans. Korean Soc. Mech. Eng. A, Vol. 34, No. 8, pp. 989-996. https://doi.org/10.3795/KSME-A.2010.34.8.989
  9. Lee, J.M. and Lee, T.H., 2011, "Full Frontal Crashworthiness Design Optimization of a Vehicle using the Statistical Space-Time Kriging Metamodel based on Multiple Responses Approach," 9th World Congress on Structural and Multidisciplinary Optimization, June 13-17, Shizuoka, Japan.
  10. Martin, J. and Simpso, T., 2006, "A Monte Carlo Method for Reliability-Based Design Optimization," 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
  11. Choi, K., Lee, G. and Choi, D., 2009, "Reliability- Based Design Optimization Using Kriging Metamodel with Sequential Sampling Technique," Trans. Korean Soc. Mech. Eng. A, Vol. 33, No. 12, pp. 1464-1470. https://doi.org/10.3795/KSME-A.2009.33.12.1464
  12. Cho, T., Ju, B., Jung, D. and Lee, B., 2006, "Reliability Estimation Using Kriging Metamodel," Trans. Korean Soc. Mech. Eng. A, Vol. 30, No. 8, pp. 941-947. https://doi.org/10.3795/KSME-A.2006.30.8.941