The Proceeding of the Korean Institute of Electromagnetic Engineering and Science (한국전자파학회지:전자파기술)

The Korean Institute of Electromagnetic Engineering and Science (한국전자파학회)
권호 표지

밀리미터파 대역 산란계수 및 안테나 특성에 대한 측정 기술 개발과 연구 동향

  • Published : 2013.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. G. F. Engen, C. A. Hoer, "Thru-Reflect-Line: an improved technique for calibrating the dual six-port automatic network analyzer", IEEE Trans. Microwave Theory and Tech., vol. MTT-27, no. 12, pp. 987-993, Dec. 1979.
  2. C. A. Hoer, "Choosing line lengths for calibrating network analyzers", IEEE Trans. Microwave Theory and Tech., vol. MTT-31, no. 1, pp. 76-78, Jan. 1983.
  3. C. A. Hoer, G. F. Engen, "Accuracy assessment for the dual six-port ANA: extension to nonmating connectors", IEEE Trans. Instrum. Meas., vol. IM-36, no. 2, pp. 524-529, Jun. 1987. https://doi.org/10.1109/TIM.1987.6312732
  4. N. M. Ridler, "Choosing line lengths for calibrating waveguide vector network analysers at millimetre and sub-millimetre waveguides", NPL Report TQE 5, Mar.
  5. 여준호, 김채영, 최현철, "구형도파관의 벽면거칠기가 고려된 감쇄상수 계산", 대한전자공학회, 대한전자공학회 학술대회 논문집, 제16호 1호, pp. 84-87, 1993년.
  6. 여준호, 김채영, "벽면거칠기가 고려된 구형도파관의 감쇄특성 분석", 대한전자공학회, 전자공학회논문지, A편, 제31권 제11호, pp. 1470-1478, 1994년.
  7. R. B. Dybdal, L. Jr. Peters, and W. H. Peake, "Rectangular waveguides with impedance walls", IEEE Trans. Microwave Theory and Tech., vol. MTT-19, no. 1, pp. 2-8, Jan. 1971.
  8. D. A. Hill, "Reflection coefficient of a waveguide with slightly uneven walls", IEEE Trans. Microwave Theory and Tech., vol. MTT-37, no. 1, pp. 244- 252, Jan. 1989.
  9. C. D. Chen, Ching-Kuang C. Tzuang, and S. T. Peng, "Full-wave analysis of a lossy rectangular waveguide containing rough inner surfaces", Microwave and Guided Wave Letters, IEEE, vol. 2, no. 5, pp. 180-181, May 1992. https://doi.org/10.1109/75.134347
  10. F. Ladouceur, J. D. Love, and T. J. Senden, "Effect of side wall roughness in buried channel waveguides", Optoelectronics, IEE Proc., vol. 141, no. 4, pp. 242-248, Aug. 1994. https://doi.org/10.1049/ip-opt:19941085
  11. A. Collaro, G. Franceschetti, M. Migliaccio, and Daniele Riccio, "Gaussian rough surfaces and Kirchhoff approximation", IEEE Trans. Microwave Theory and Tech., vol. MTT-47, no. 2, pp. 392- 398, Feb. 1999.
  12. Rui Wang, Wanzhao Cui, "A rapid estimation of the conductor loss in the rectangular waveguide with rough surface", 2011 IEEE 4th Inter. Symp. on MAPE, pp. 498-800, 2011.
  13. P. Lagasse, J. Van Bladel, "Square and rectangular waveguides with rounded corners", IEEE Trans. Microwave Theory and Tech., vol. MTT-20, no. 5, pp. 331-337, 1972.
  14. E. J. Griffin, T. E. Hodgetts, "Effect on return loss of dimensional tolerances of the aperture of rectangular waveguide", Electronics Letters, no. 20, pp. 942-943, Sep. 1985.
  15. A. Mahanfar, S. Bila, M. Aubourg, and S. Verdeyme, "Analysis of rectangular waveguides with curved corners using superquadric functions", 2002 3rd Inter. Conf. on MMWT, pp. 837-839, 2002.
  16. E. Degirmenci, F. Surre, S. Philippe, R. Maldonado- Basilio, and P. Landais, "Improved bend waveguide design for terahertz transmission", IEEE Trans. on Terahertz Sci. and Tech., vol. 2, no. 1, pp. 137- 143, 2012. https://doi.org/10.1109/TTHZ.2011.2177170
  17. G. Oleson, A. Denning, "Millimeter-wave vector analysis calibration and measurement problems caus- ed by common waveguide irregularities", OML Inc., Morgan Hill, CA, Applicat. Notes, 2005. [Online] Available: http://www.omlinc.com/download/ mwvacamp.pdf
  18. A. R. Kerr, E. Wollack, and N. Horner, "Waveguide flanges for ALMA instrumentation", Nat. Radio Astron. Observatory, Charlottesville, VA, ALMA Memo 278, Nov. 1999. [Online] Available: http:// www.alma. nrao.edu/memos
  19. A. R. Kerr, L. Kozul, and A. A. Marshall, "Recommendations for flat and anti-cocking waveguide flanges", Electron. Div., Nat. Radio Astron. Observatory, Charlottesville, VA, Tech. Note 192, 2003. [Online] Available: http://www.gb.nrao.edu/electronics/ edtn
  20. D. F. Williams, "500 GHz-750 GHz Rectan- gularwaveguide vector-network-analyzer calibrations", IEEE Trans.on Terahertz Sci. and Tech., vol. 1, no. 2, pp. 364-377, 2011. https://doi.org/10.1109/TTHZ.2011.2127370
  21. W. Sigg, J. Simon, "Reflectometer calibration using load, short and offset shorts with unknown phase", Electron. Lett., vol. 27, no. 18, pp. 1650-1651, Aug. 1991. https://doi.org/10.1049/el:19911031
  22. IEEE Standard for rectangular waveguides and flanges for rectangular waveguides for use at millimeter and sub-millimeter wavelengths. [Online] Available: http://grouper.ieee.org/groups/1785/index. html
  23. S. A. Chahine, B. Huyart, and J. Achkar, "Reflectometer calibration without an open circuit", IEEE Trans. Instrum. Meas., vol. IM-52, no. 5, pp. 1488- 1493, Oct. 2003.
  24. C. Vicente, H. L. Hartnagel, "Passive-intermodulation analysis between rough rectangular waveguide flanges", IEEE Trans. Microwave Theory and Tech., vol. MTT-53, no. 8, pp. 2515-2525, 2005.
  25. A. Fung et al., "Two-port vector network analyzer measurements in the 218-344 and 356-500 GHz frequency bands", IEEE Trans. Microwave Theory and Tech., vol. MTT-54, no. 12, pp. 4507-4512, Dec. 2006.
  26. P. L. Kirby, D. Pukala, H. Manohara, I. Mehdi, and J. Papapolymerou, "Characterization of micromachined silicon rectangular waveguide at 400 GHz", Microwave and Wireless Components Letters, IEEE, vol. 16, no. 6, pp. 366-368, Jun. 2006. https://doi.org/10.1109/LMWC.2006.875593
  27. A. R. Kerr, "Mismatch caused by waveguide tolerances, corner radii, and flange misalignment", National Radio Astronomy Observatory EDTN 215, Dec. 2009, rev. Jan. 2010.
  28. A. C. Newell, R. C. Baird, and P. F. Wacker, "Accurate measurement of antenna gain and polarization at reduced distance by an extrapolation technique", IEEE Trans. Antennas Propagat., vol. AP-21, no. 4, pp. 418-431, Jul. 1973.
  29. 강진섭, 김정환, 강노원, 김대찬, "(서브)밀리미터파대역 안테나 이득 정밀측정", 2012년도 KIE- ES 전자파기술 하계 학술대회 자료집, 목포대학교, p. 8, 2012년 7월.
  30. J. A. Gordon, D. R. Novotny, "A simultaneousimaging machine-vision approach for the precision alignment of two mm-wave antennas", Digest of Conferenceon Precision Electromagnetic Measurements (CPEM 2012), Washington DC, USA, pp. 262-263, Jul. 2012.