References
- C. T. Liu, E. P. George, P. J. Maziasz, and J. H. Schneibel, Mater. Sci. Eng. A 258, 84 (1998). https://doi.org/10.1016/S0921-5093(98)00921-6
- S. C. Deevi and V. K. Sikka, Intermetallics 4, 357 (1996). https://doi.org/10.1016/0966-9795(95)00056-9
- L. Zheng, X. Peng, and F. Wang, Corros. Sci. 53, 597 (2011). https://doi.org/10.1016/j.corsci.2010.10.003
- A. Michalski, J. Jaroszewicz, M. Rosinski, and D. Siemiaszko, Intermetallics 14, 603 (2006). https://doi.org/10.1016/j.intermet.2005.10.003
- L. Z. Zhou, J. T. Guo, G. S. Li, L.Y. Xiong, S. H. Wang, and C. G. Li, Mater. Des. 18, 373 (1997). https://doi.org/10.1016/S0261-3069(97)00079-4
- M. F. Ashby and D. R. H. Jones, Engineering Materials 1 (International Series on Materials Science and Technology, Vol.34), Pergamon Press, Oxford (1986).
- M. S. El-Eskandarany, Alloys. Compd. 305, 225 (2000). https://doi.org/10.1016/S0925-8388(00)00692-7
- L. Fu, L. H. Cao, and Y. S. Fan, Scripta Materialia. 44, 1061 (2001). https://doi.org/10.1016/S1359-6462(01)00668-6
- N.-R. Park, I.-Y. Ko, J.-K. Yoon, J.-M. Doh, and I.-J. Shon, Met. Mater. Int. 17, 233 (2011). https://doi.org/10.1007/s12540-011-0408-5
- Z. Fang and J. W. Eason, Int. J. of Refractory Met. & Hard Mater. 13, 297 (1995). https://doi.org/10.1016/0263-4368(95)92675-A
- A. I. Y. Tok, L. H. Luo, and F. Y. C. Boey, Mater. Sci. Eng. A. 383, 229 (2004-2005).
- J. Jung and S. Kang, Scripta Materialia 56, 561 (2007). https://doi.org/10.1016/j.scriptamat.2006.12.026
- I.-J. Shon, H.-Y. Song, S.-W. Cho, W. Kim, and C.-Y. Suh, Korean J. Met. Mater. 50, 39 (2012). https://doi.org/10.3365/KJMM.2012.50.1.039
- I.-J. Shon, H.-J. Wang, C.-Y. Suh, S.-W. and W. Kim, Korean. J. Met. Mater. 49, 374 (2011).
- C. Suryanarayana, M. G. Norton, X-ray Diffraction A Practical Approach, Plenum Press, p. 213, New York (1998).
- K. Niihara, R. Morena, and D. P. H. Hasselman, J. Mater. Sci. Lett. 1, 12 (1982).
- Z. Shen, M. Johnsson, Z. Zhao, and M. Nygren, J. Am. Ceram. Soc. 85, 1921 (2002). https://doi.org/10.1111/j.1151-2916.2002.tb00381.x
- J. E. Garay, U. Anselmi-Tamburini, Z. A. Munir, S. C. Glade, and P. Asoka-Kumar, Appl. Phys. Lett. 85, 573 (2004). https://doi.org/10.1063/1.1774268
- J. R. Friedman, J. E. Garay, U. Anselmi-Tamburini, and Z. A. Munir, Intermetallics 12, 589 (2004). https://doi.org/10.1016/j.intermet.2004.02.005
- J. E. Garay, U. Anselmi-Tamburini, and Z. A. Munir, Acta. Mater. 51, 4487 (2003). https://doi.org/10.1016/S1359-6454(03)00284-2
Cited by
- Rapid Synthesis and Consolidation of a Nanostructured Mg0.6Al0.8Ti1.6O5 Compound by Pulsed Current Activated Heating vol.54, pp.11, 2013, https://doi.org/10.2320/matertrans.m2013255
- Pulsed Current Activated Synthesis and Consolidation of Nanostructured MoSi2–NbSi2 Composite and Its Mechanical Properties vol.55, pp.2, 2013, https://doi.org/10.2320/matertrans.m2013341
- 고주파 유도 가열에 의한 나노구조 Mg4Al2Ti9O25 합성 및 소결과 기계적 성질 vol.24, pp.2, 2013, https://doi.org/10.3740/mrsk.2014.24.2.67
- Simultaneous Synthesis and Consolidation of Nanostructured MoSi2-NbSi2 Composite by High-Frequency Induction Heated Sintering and Its Mechanical Properties vol.24, pp.4, 2013, https://doi.org/10.3740/mrsk.2014.24.4.180
- Effect of Cu addition on microstructure and mechanical properties of Fe-2 wt-%Ni alloy processed by metal injection moulding vol.18, pp.2, 2014, https://doi.org/10.1179/1432891714z.000000000541
- Influence of sintering temperature on microstructure and mechanical properties of Fe-2Ni-2Cu alloy processed by metal injection moulding vol.18, pp.2, 2013, https://doi.org/10.1179/1432891714z.000000000542
- Simultaneous Synthesis and Consolidation of Nanostructured MgSiO3–Mg3Al2Si3O12 Composite and Its Mechanical Properties vol.55, pp.7, 2013, https://doi.org/10.2320/matertrans.m2014018
- Rapid Synthesis and Consolidation of Nanostructured Ti-TiC Composites from TiH2 and CNT by Pulsed Current Activated Heating vol.25, pp.1, 2015, https://doi.org/10.3740/mrsk.2015.25.1.48