Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Robust Design of Springback in Sheet Metal Forming

박판 성형 공정에서 스프링백의 강건 설계

  • Kim, Kyung-Mo (School of Industrial Engineering, Kumoh National Institute of Technology) ;
  • Yin, Jeong-Je (Department of Mechanical Design, Induk University)
  • Published : 2013.04.30
⟨ Previous Next ⟩

Abstract

Springback is a very typical dimensional discrepancy phenomenon, which occurs usually on the final stamping parts after the tool loading is removed. Variation of springback leads to amplified variations and problems during assembly of the stamped components, in turn, resulting in quality issues. The variations in the properties of the incoming material and process parameters are the main causes of springback variation. In this research, a robust design methodology which combines orthogonal array based experimental design and design space reduction skim to reduce the springback variation for advanced high strength steel parts in sheet metal forming is suggested. The concept of design space reduction is adapted in the experimental design setup to improve the quality of the obtained solution. The effectiveness of the proposed procedures is illustrated through a robust design of springback in metal forming process of a cross member of auto body.

Keywords

References

  1. Zhang, Z. T., and Lee, D., "Effects of process variables and material properties on the springback behavior of 2D-draw bending parts", Automotive Stamping Technology, SAE, pp.11-18, 1995.
  2. Geng, L. M., and Wagoner, R. H., "Role of plastic anisotropy and its evolution on springback", Int. J. Mech. Sci., Vol. 44, No. 1, pp.123-148, 2002. https://doi.org/10.1016/S0020-7403(01)00085-6
  3. Col, A.. "Investigation on process forming scatter origin", Proceedings of Sixth International ESAFORM Conference on Material Forming, 2003.
  4. Song, J. H., Huh, S. H., Kim, S. H., and Park, S. H., "Springback reduction in stamping of front side member with a response surface method", Proceedings of the 6th International Conference NUMISHEET 2005, pp.303-308, 2005.
  5. Bae, G. H., Song, J. H., Huh, S. H., Kim, S. H., and Park, S. H., "Simulation-based prediction model of the draw-bead restraining force and its application to sheet metal forming process", J. of Materials Processing Technology, Vol. 187-188, pp.123-127, 2007. https://doi.org/10.1016/j.jmatprotec.2006.11.059
  6. Stoughton T. B., "Model of drawbead forces in sheet metal forming", Proceedings of the 15th Biennial Congress IDDRG, pp.205-3215, 1988.
  7. Liu, G., Lin, Z., and Bao, Y., "Optimization design of drawbead in drawing tools of autobody cover panel", J. Eng. Mater. Technol., Vol. 124, pp.278-285, 2002. https://doi.org/10.1115/1.1448523
  8. Chen, P.. and Koc, M, "Simulation of springback variation in forming of advanced high strength steels", Journal of Materials Processing Technology, Vol. 190, pp. 189-198, 2007. https://doi.org/10.1016/j.jmatprotec.2007.02.046
  9. Souza, T.. and Rolfe, B, "Multivariate modeling of variability in sheet metal forming", Journal of Materials Processing Technology, Vol. 203, pp. 1-12, 2008. https://doi.org/10.1016/j.jmatprotec.2007.09.075
  10. Kim, K. M., Yin, J. J., and Suh, Y. S., "Process optimization of Sheet Metal Forming Using Operating Window," Proceedings of the ASME IDETC/CIE 2009, San Diego, California, 2009.
  11. Park, J., "R&D Creative Innovation : Design for Six Sigma and TRIZ", Proceedings of TRIZ Conference, Seoul, pp. 1-22, 2011.
  12. Zhang, W., and Shivpuri, R., "Probabilistic design of aluminum sheet drawing for reduced risk of wrinkling and fracture," Reliability Engineering and System Safety, Vol. 94, pp. 152-161, 2009. https://doi.org/10.1016/j.ress.2008.02.024
  13. Strano, M., "Robustness Evaluation and Tolerance Prediction for a Stamping Process with Springback Calculation by the FEM," Numisheet 2005 pp. 266-271, 2005.
  14. Kim, K. M. and Yin, J. J., "Optimization of sheet metal forming process by using decision-making theory," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 125-136, 2012.
  15. Donglai, W., Zhenshan, C., and Jun, C., "Optimization and tolerance prediction of sheet metal forming process using response surface model," Computational Materials Science, Vol. 42, pp. 228-223, 2008. https://doi.org/10.1016/j.commatsci.2007.07.014
  16. Buranathiti, T., Cao, J., Xia, Z. C,. and Chen, W., "Probabilistic Design in a Sheet Metal Stamping Process under Failure Analysis," Numisheet 2005, pp. 867-872, 2005.
  17. Li, Y. Q., Cui, Z. S., Ruan, X. Y., and Zhang, D. J., "Application of Six Sigma Robust Optimization in Sheet Metal Forming," Numisheet 2005, pp. 819-824, 2005.
  18. Mullerschon, H., Roux, W., Lorenz, D., and Roll, K., "Stochastic Analysis of Uncertainties for Metal Forming Processes with LS-OPT," Numisheet 2008, pp. 819-828, 2008.
  19. Phadke, M. S., Quality Engineering using Robust Design, Prentice Hall, 1989.