Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Study on Simulation of Fuel Injection Nozzle for Marine Medium Speed Diesel Engine

선박용 중속디젤엔진 연료분사노즐 해석 연구

  • Yang, Young-Joon (Gyeongnam National University of Science and Technology, Dept. of Automotive Engineering)
  • Published : 2013.06.30
⟨ Previous Next ⟩

Abstract

This study was carried out to improve the design of fuel injection nozzle for marine medium speed diesel engine. For this purpose, fuel injection nozzle was modeled and simulated using CATIA V5R19 and FLUENT & MSC Nastran. Analyses of flow and heat transfer, respectively, were performed to find the optimal design of fuel injection nozzle. As the results, big pressure drop, which may lead to cavitation damage, was occurred at inlet of fuel injection hole with diameter 0.3mm. Furthermore, it was confirmed that the increase of mean temperature of fuel injection nozzle was almost a half in comparison with that of fuel injection nozzle tip.

Keywords

References

  1. .B. Park and J.Y. Koo, "Characteristics of a High Pressure Accumulator Type Fuel Injection System", KSME B, Vol. 22, No. 8, pp. 1101-1110, 1998.
  2. B.S. Shin, J.H. Lee and K.H. Kim, "The Effect of Injection Rate Variations on the Combustion of a Direct Injection Diesel Engine", Transactions of the KSAE Autumn Conference, pp. 461-467, 1997.
  3. M.D. Eom, M.S. Kim and D.S. Baik, "S Study on Performance Characteristics in Diesel Engine When Applied Ball Bearing Type Turbocharger", Transactions of the KSAE, Vol. 18, No. 4, pp. 74-78, 2010.
  4. T.H. Park, D.H. Kim and S.H. Ghal, "A Study on the Design Improvement to Increase Durability of Fuel Injection Nozzle for HiMSEN Engine", Journal of the Korean Society of Marine Engineering Autumn Conference, pp. 231-232, 2010.
  5. B.S. Kim and K.D. Kim, "Optimization for Design Parameters of Fuel Injection System to Reduce Fuel Economy and NOx in Marine Medium Speed Diesel Engine", KSAE Conference, pp. 178-183, 2009.
  6. G.B. Kim, S.Y. Lee, H.J. Park, Y.J. Chang and C.H. Jeon, "A Numerical Analysis of the Fuel Injection System for Heavy Duty Diesel Engines", Transactions of the KSAE Spring Conference, pp. 124-130, 2003.
  7. Y.J. Yang, "Study on Simulation of Fuel Injection Pump for Marine Medium Diesel Engine", The Korean Society of Manufacturing Process Engineers, pp. 123-129, Dec., 2012.
  8. Pounder (Translation by H.J. Chun and D.C. Lee), "Marine Diesel Engine and Gas Turbine", Dong Myong Sa, 2002.