Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on the radiant Heat Characteristic According to Type and Array of LED Lighting Heatsink

LED 조명등 히트싱크 형상과 배열에 따른 방열특성에 관한 연구

  • Jang, Hyun (Graduate School, Gyeongsang national university) ;
  • Suh, Jeong Se (School of Mechanical engineering & ERI Gyeongsang National University) ;
  • Yi, Chung Seob (ERI Gyeongsang National University)
  • Published : 2013.06.30
⟨ Previous Next ⟩

Abstract

Numerical analysis of the radiant heat characteristic around heatsink according to arrangement and shape of fin on 60W-LED lamp is conducted in this study. In the case of top blow blowing from upper side on LED lamp, there is just little difference in cooling characteristics according to the height of fin. On the other hand, the fin arranged side by side has the advantage of heat transfer enhancement by comparing with zig-zag type because it leads to more loss of flow. In case of making fin round to increase the amount of heat transfer, designing arrangement with the minimized loss of flow has the advantage of characteristic.

Keywords

References

  1. Park, J. M., Choi, W. S., Kwon, S. H., Cha, J. H, "Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation", Journal of the KSMPE, Vol. 8, No. 4, pp. 48-53, 2009
  2. Lee, Y. M., Chang, S. I., Sun, J. W., Yun, J. H., "Chip Breaking Characteristics Depending on Equivalent Effective Rake Angle in Turning", Journal of KSMPE, Vol.2, No.2, pp.25-31, 2004
  3. Park, J. M., Choi, W. S., "Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation", Journal of the KSMPE, Vol. 8, No. 4, pp 48-53, 2009
  4. Song. Y. C., Park. C. H., "Control of tool Wear in Diamond Cutting of Steels by Intermittent Cutting Method", Journal of the KSPE, Vol. 25, No. 6, pp. 40-46, 2008
  5. Lee, J. W., Min, K. D., "A Study on Nozzle Flow and Spray Characteristics of Piezo Injector for Next Generation High Response Injection", Transactions Of the KSME(B), Vol. 30, No. 6, pp. 553-559, 2006
  6. Narendran, N., and Gu, Y., "Life of LED-based White Light Sources," Journal of Display Technology, Vol. 1, No. 1, pp. 167-171, 2005 https://doi.org/10.1109/JDT.2005.852510
  7. Sathe, S., Sammakia, B., "A Review of resent Developments in Some Practical Aspects of Air-Cooled Electronic package", Journal of heat transfer, Vol. 120, No. 4, pp.830-839, 1998 https://doi.org/10.1115/1.2825902
  8. A.K. da Silva, S. Lorente, A. Bejan, "Optimal Distribution of Discrete Heat Sources on a Plate with Laminar Forced Convection", International Journal of Heat and Mass Transfer, Vol 47, pp. 2139-2148, 2004 https://doi.org/10.1016/j.ijheatmasstransfer.2003.12.009