KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Comparing the CO2 Emission Estimating Result for Construction Equipment

건설장비 CO2배출량산출결과 비교연구

  • 김병수 (경북대학교 토목공학과) ;
  • 장원석 (영남대학교 건설시스템공학과)
  • Received : 2013.03.09
  • Accepted : 2013.05.02
  • Published : 2013.07.30
Download PDF
⟨ Previous Next ⟩

Abstract

To resolve the Global Warming problem, it have to reduce $CO_2$ emission. Korea need to do actively more the effort to reduce the emission because $CO_2$ emission per person is top level in the world. It is performing variously. However, we should recognize the $CO_2$ emission attribute to decrease $CO_2$. Analyzing $CO_2$ emission of the construction equipment is important in this aspect. Present, the most popular $CO_2$ emission measuring method is the way using fuel consumption and emission factor. But this method have the problem of reliability because can't reflect the factor being out of proportion at fuel consumption. This study analyzed the reason of difference and compared to the emission factor method after calculate $CO_2$ emission in direct measurement method.

지구온난화(Global Warming) 문제를 해결하기 위해서는 이산화탄소 배출량을 줄여야 한다. 우리나라는 1인당 이산화탄소 배출량이 세계 Top 수준이기 때문에 배출량을 줄이기 위한 노력을 더욱 적극적으로 할 필요가 있다. 이산화탄소 배출량을 줄이기 위한 노력은 다방면으로 이루어지고 있다. 그러나 $CO_2$ 를 줄이기 위해서는 그것의 배출특성을 알아야 한다. 건설장비의 이산화탄소 배출량을 측정하여 비교분석하는 것은 이러한 측면에서 중요하다. 현재 가장 많이 이용되고 있는 배출량 산정방법은 연료사용량 대비 배출계수를 이용하는 방법이다. 그러나 이 방법은 연료사용량에 비례하지 않는 요인을 반영하지 못하므로 신뢰성에 문제가 있다. 본 연구에서는 건설장비의 이산화탄소 배출량을 직접측정방식으로 산정하여 배출계수에 의한 방식과 비교분석하고 그 차이에 대한 원인을 분석하였다.

Keywords

References

  1. Doosan Infracore Construction Equipment (2013). Data of the DX 300LCA (in Korean).
  2. EPA (2004). NONROAD2005 Model, U.S. Environmental Protection Agency, http://www.epa.gov/otaq/models/nonrdmdl/nr-arch.htm.
  3. Frey, H. C., Rasdorf, W., Kim, K., Pang, S. H. and Lewis, P. (2008). "CRC On-Road Vehicle Emissions Workshop." March 31 to April 2, 2008.
  4. Ghil, J. H. (2010). A study on estimation of automobile emissions by the portable emission measurement system, MSc Dissertation, Inha University, Incheon (in Korean).
  5. IPCC (2008). 2006 Guideline to make inventories of nation greenhouse gas.
  6. Jang, W. S. and Kim, B. S. (2013). "The application of $CO_{2}$ and hydrometer sensor for development of real time measuring method on $CO_{2}$ emission of construction equipment." Korea Institute Construction Engineering Management, Vol. 14, No. 2, pp. 78-86 (in Korean). https://doi.org/10.6106/KJCEM.2013.14.2.078
  7. Kim, J. H. (2011). Automobile diesel engine, 1st ed. Goldenbell, Seoul (in Korean).
  8. Kim, T. H. (2007). Estimation of emissions of carbon dioxide ($CO_{2}$) in the metropolitan area and the necessity of developing the learning materials for its reduction, MSc Dissertation, Korea National University of Education, Chung- Buk, p. 19 (in Korean).
  9. Kwon, S. H. (2008). Development of assessment model for environmental economics of construction projects, Ph.D. Dissertation, Chung-Ang University, Seoul (in Korean).
  10. Lee, J.-Y., Jung, W.-S. and Hwang, I.-H. (2011). "The evaluation of GHG emission in railroad construction sector." Journal of KSR, KSR, Vol. 14, No. 3, pp. 271-275 (in Korean).
  11. Lee, M. G., Park, Y. G., Yoo, J. J., Sung, H. G. and Jung, K. K. (2010). "An analysis of the relationship between engine RPM and fuel construction on a real vehicle." Proceeding of the ITFE Conference, pp. 3-6 (in Korean).
  12. Lee, T. W. (2010). Study on methodology of emission factors development for vehicles based on on-road measurements, Ph. D. Dissertation, Inha University, Incheon (in Korean).
  13. Lim, J. H., Jung, S. W., Lee, T. W., Kim, J. C., Seo, C. Y., Ryu, J. H., Hwang, J. W., Kim, S. M. and Eom, D. S. (2009). "A study on calculation of air pollutants emission factors for construction equipment." Journal of Korean Society for Atmospheric Envronment, Vol. 25, No. 3, pp. 188-195 (in Korean). https://doi.org/10.5572/KOSAE.2009.25.3.188
  14. Yu, S. A., Jeong, A. R., Jung, H., Lee, H. W., Gwon, H. B. and Park, Y. S. (2012). "A study on property and $CO_{2}$ emission factor of domestic fuel." The Korean Society of Automotive Engineers, KSAE, in Korean, Vol. 2012, No. 5, pp. 400-405.
  15. Standard RSMeans (2012). Korea institute of construction technology (in Korean).

Cited by

  1. Analysis of the CO2 emission characteristics of earthwork equipment vol.19, pp.1, 2015, https://doi.org/10.1007/s12205-014-0679-8
  2. A study on analysis of the environmental load impact factors in the planning stage for highway project vol.20, pp.6, 2016, https://doi.org/10.1007/s12205-015-0526-6
  3. Sustainable Design Method of Reinforced Concrete Beam Using Embodied Energy Optimization Technique vol.34, pp.4, 2014, https://doi.org/10.12652/Ksce.2014.34.4.1053
  4. A Study on the Effect of the Urban Regeneration Project on the Reduction of Carbon Emission - A Case Study of Jeonju Test-Bed - vol.36, pp.1, 2016, https://doi.org/10.12652/Ksce.2016.36.1.0065
  5. Experimental Analysis to Characterizing CO2 Emission of Roller vol.898, pp.1662-8985, 2014, https://doi.org/10.4028/www.scientific.net/AMR.898.452
  6. The Environmental Load Characteristic Analysis of LCA-based IPC Girder Bridge vol.164, pp.1755-1315, 2018, https://doi.org/10.1088/1755-1315/164/1/012032