KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

A Prototype BIM Server based viewer for Cloud Computing BIM Services

클라우드 컴퓨팅 기반 BIM 서비스를 위한 BIM 서버 기반의 뷰어 개발

  • 윤수원 (포스코건설 기술연구소) ;
  • 김병곤 (한국건설기술연구원 SOC 성능연구소 ICT 융합연구실) ;
  • 최종문 (포스코건설 기술연구소) ;
  • 권순욱 (성균관대학교 건축공학과/u-City 공학과)
  • Received : 2012.11.09
  • Accepted : 2013.04.15
  • Published : 2013.07.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. Therefore, this research proposes the cloud computing based BIM service for saving the cost of BIM infrastructure development and providing various BIM Services to meet the domestic process. In order to achieve this, we perform a survey on the cloud computing based BIM service and develope the prototype system as the core technology of proposed service. The developed the prototype system consists of the IFC based BIM server for IaaS (Infrastructure as a Service) and the viewer for SaaS (Software as a Service). This research also conducts the performance test for their applicability and verifies that the results of this research can be used as core components in the cloud computing based BIM service.

최근 BIM 기술은 적용 확대가 모색되고 있으나, 관련 제도 미비, BIM 인프라 구축비용, 프로세스 상이 등과 같은 문제로 인해 초기 기대치보다 확산이 지연되고 있다. 따라서 본 연구는 이러한 문제 중, BIM 운영을 위해 필요한 인프라 구축 비용 절감과 국내 프로세스에 맞는 다양한 BIM 서비스 제공을 위한 방안으로 클라우드 컴퓨팅 기술과 BIM을 접목하는 것을 제안하고, 이를 위한 수요 조사를 바탕으로, 클라우드 컴퓨팅을 이용한 인프라 비용 절감(IaaS 구축)을 위한 IFC 기반 BIM 서버와 맞춤형 서비스(SaaS 제공)를 위한 Viewer를 개발하였다. 또한 본 연구에서는 개발된 시스템의 실용화 가능 여부에 관한 성능 테스트를 실시하여, 개발 결과물이 향후 클라우드 기반 BIM 서비스 개발의 요소기술로 활용될 수 있다는 것을 검증하였다.

Keywords

References

  1. Redmond, A. and Smith, B. (2011). "Exchanging partial BIM information through a cloud-based service: Testing the Efficacy of a Major Innovation." Proc. of the IBEA Conference 2011, London South Bank University.
  2. Bae, J. S. and Cho, Y. S. (2008). "A study on the embodiment of prototype for one-way slab design based on the objectARX applying the concept of BIM." Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, Vol. 24, No. 8, pp. 41-48 (in Korean).
  3. BuildingSMART (2008). "Challenges on BIM and common countermeasures in architectural design." BuildingSMART Forum 2008.
  4. Chae, K. H. and Lee, G. (2011). "A study on the problems and the measurements for improving representations and drafting methods of architectural drawings by Adopting BIM." Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, Vol. 27, No. 10, pp. 67-74 (in Korean).
  5. Goh, I. D., Choi, J. H., Kim, E. D., Jeong, Y. S. and Lee, J. M. (2008). "Extracting building geometry from BIM for 3-D city mode." Journal of GIS Association of Korea, The Korean Association of Geographic Information Studies, Vol. 16, No. 2, pp. 49-57 (in Korean).
  6. Ham, N. H., Moon, H., Lee, Y. S., Kim, J. H., Lee, S. J. and Kim, J. J. (2008). "A study on application of BIM(Building Information Modeling) to pre-design in construction project." Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, Vol. 24, No. 7, pp. 39-46 (in Korean).
  7. Han, J. Y., Cha, H. S. and Lee, D. G. (2008). "A measure for standardization of old aged apartment remodeling through application of BIM." Korea Journal of Construction Engineering and Management, Korea Institute of Construction Engineering and Management, Vol. 9, No. 1, pp. 66-76 (in Korean).
  8. Han S. B. (2011). Feasibility study on strategic planning to build a cloud computing environment for smart education, 2011 KERIS Issue Report RM 2011-19, Korea Education and Research Information Service (in Korean).
  9. Hore, A. V., Redmond, A. and West, R. P. (2010). "Development of a cloud web collaborator for SMEs in the Irish construction industry." Proc. of 8th European Conference on Product and Process Modelling, University of Cork, Ireland, 14-16 September, pp. 139-144.
  10. Jeon, S. H., Yun, S. H. and Paek, J. H. (2007). " A study on analysis of the correlation between building information modeling and project management information system." Proc. of Conference in Architectural Institute of Korea, Architectural Institute of Korea, pp. 757-760 (in Korean).
  11. Jo, J., Park, J. H., Park, W. H., Yun, S. H. and Paek, J. H. (2008). "A study on the BIM based architectural construction simulation system using combinative construction schedule creation method." Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, Vol. 24, No. 7, pp. 101-108 (in Korean).
  12. Haymaker, J. and Fischer, M. (2001). Challenges and Benefits of 4D Modeling on the Walt Disney Concert Hall Project, CIFE, Stanford University, Working Paper, #64.
  13. Kang, J. H., Anderson, S. D. and Clayton, M. J. (2007). " Empirical study on the merit of web-based 4D visualization in collaborative construction planning and scheduling." Journal of Construction Engineering & Management, ASCE, Vol. 133, No. 6, pp. 447-461. https://doi.org/10.1061/(ASCE)0733-9364(2007)133:6(447)
  14. Kang, L., Moon, H. S., Ji, S. B. and Lee, T. S. (2008). "Development of major functions of visualization system for construction schedule data in plant project." Korea Journal of Construction Engineering and Management, Vol. 9, No.1, pp. 66-76 (in Korean).
  15. Kim, H. E. and Kano N. (2006). "Visualization of process and inference of assemble sequence using 3-dimensional CAD data." Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, Vol. 22, Vol. 5, pp. 179-186 (in Korean).
  16. Kim, K. H., Kim, E. J. and Kim, J. J. (2009). "A study to judge the importance of indices to estimate architectural competition on the apartment for using BIM." Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, Vol. 25, No. 2, pp. 59-66 (in Korean).
  17. Kim, S. A., Yang, B. H., Chin, S. and Yoon, S. W. (2012). " A study on a development and current state of BIM in Korean focuse on hype-cycle." Proc. of KIBIM Annual Conference 2012, Korea Institute of Building Information Modeling, Vol. 2, No. 1, pp. 73-74 (in Korean).
  18. Kumar, B., Cheng, J. and Mcgibbney, L. (2010). "Cloud computing and its implications for construction it." Proc. of the International Conference, Computing in Civil and Building Engineering, pp. 315-320, Nottingham University Press.
  19. Kwon, O. C. and Jo, C. W. (2008). "A study on the improvement of 2D digital drawing standards considering the paradigm shift to BIM." Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, Vol. 24, No. 5, pp. 49-57 (in Korean).
  20. Lee, C. J., Lee, G. and Won, J. S. (2009). "An analysis of the BIM software selection factor." Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, Vol. 25, No. 7, pp. 153-164 (in Korean).
  21. Lee, G. (2006). "Key technologies for building information modeling (BIM)." Proc. of KICEM Annual Conference 2006, Korea Institute of Construction Engineering and Management, pp. 145-149 (in Korean).
  22. Lee, J. H. and Eom, S. J. (2011). "Computing technology for mobile BIM based project management information system." Proc. of The Korea Institute of Building Construction, 2011 Spring conference, The Korea Institute of Building Construction, Vol. 11, No. 1, pp. 145-148 (in Korean).
  23. Lee, J. S., Moon, S. K., Kim, J. H. and Kim, J. J. (2009). "An analysis about factors affecting inactiveness of BIM (Building Information Modeling) introduction in the construction project." Proc. of KICEM Annual Conference 2009, Korea Institute of Construction Engineering and Management, pp. 757-762 (in Korean).
  24. Lim, J. T. and Kim, N. U. (2006). "A Study on the design process by prototype method." Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, Vol. 22, No. 4, pp. 127-134 (in Korean).
  25. Lee, S. H., Ahn, B. J., Kim, J. H., Kim, K. H., Lee, Y. S. and Kim, J. J. (2007). "An analysis on affecting factors about lowly using 3D CAD by using the AHP." Korea Journal of Construction Engineering and Management, Korea Institute of Construction Engineering and Management, Vol. 8, No. 6, pp. 188-196 (in Korean).
  26. Park, J. D. and Kim, J. W. (2009). "A study on the ontology representation of the IFC based building information model." Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, Vol. 25, No. 5, pp. 87-94 (in Korean).
  27. Park, J. W., Kim, S. C., Lee, S. S. and Song, H. Y. (2009). "Suggesting solutions when applying building information modeling (BIM) to the Korean construction industry through case studies." Journal of The Korea Institute of Building Construction, The Korea Institute of Building Construction Vol. 9, No. 4, pp. 93-102 (in Korean). https://doi.org/10.5345/JKIC.2009.9.4.093
  28. Smart Market Report (2008). Building information modeling (BIM): Transforming Design and Construction to Achieve Greater Industry Productivity, Autodesk, McGrawHill Construction.
  29. Song, J. K. and Ju, K. B. (2011). "Applying the cloud computing technology for utilizing mobile device of BIM-based maintenance systems." Proc. of KICEM Annual Conference 2011, Korea Institute of Construction Engineering and Management, pp. 311-312 (in Korean).
  30. Song, M., Yoon, S. W. and Chin, S. (2011). "BSC based measurement of satisfaction degree for based BIM construction projects." Korea Journal of Construction Engineering and Management, Korea Institute of Construction Engineering and Management, Vol. 12, No. 4, pp. 117-129 (in Korean).
  31. Virtaul Construction Research Group (2011). Construction & transportation R&D report-development of virtual construction system, Ministry of Land, Transport and Maritime Affairs (in Korean).
  32. Won, J. (2009). Key success factors for adopting BIM (building information modeling) in A/E/C projects, Master Thesis, Yonsei University (in Korean).
  33. Yoo, S. H., Song, J. H. and Oh, K. S. (2006). "Infrastructure of web-based system for collaborative design." Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, Vol. 22, No. 2, pp. 67-74 (in Korean).
  34. Youn, Y. J. and Kim, D.-H. (2008). "A study on the organizational change in architectural design firm by introducing BIM." Journal of The Architectural Institute of Korea (Planning & Design Section), Architectural Institute of Korea, Vol. 24, No. 6, pp. 11-18 (in Korean).
  35. Yun, S. H., Park, C. W., Lee, G. and Kim, B. K. (2008). "A study on a method for tracking lifting paths of a tower crane using GPS in the BIM environment." Journal of The Architectural Institute of Korea (Structure & Construction Section), Architectural Institute of Korea, Vol. 24, No. 6, pp. 163-170 (in Korean).

Cited by

  1. Daily Reporting System using Digital Pen at Construction Site vol.16, pp.2, 2016, https://doi.org/10.5345/JKIBC.2016.16.2.177
  2. A Study of the Establishment of Small and Medium Sized Architectural Design Firm BIM Environment based on Virtual Desktop Infrastructure vol.17, pp.5, 2016, https://doi.org/10.6106/KJCEM.2016.17.5.078
  3. A Study of the Establishment of Framework for Information Exchange based on IFC Model in Domestic Collaborative Design Environment vol.16, pp.1, 2015, https://doi.org/10.6106/KJCEM.2015.16.1.024
  4. Open source viewer-based BIM Query Development for BIM information visualization vol.5, pp.2, 2015, https://doi.org/10.13161/kibim.2015.5.2.019
  5. GIS-based BIM Object Visualization System Architecture Design using Open source BIM Server Cost-Effectively vol.22, pp.1, 2014, https://doi.org/10.12672/ksis.2014.22.1.045
  6. A Proposal of the Usage Metering Functions on Cloud Computing-Based Building Information Modeling (BIM) and the Law for the Open BIM Ecosystem vol.6, pp.3, 2016, https://doi.org/10.13161/kibim.2016.6.3.049