Advances in concrete construction

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A multi-phase model for predicting the effective chloride migration coefficient of ITZ in cement-based materials

  • Yang, C.C. (Pei-Ning Road, Keelung) ;
  • Weng, S.H. (Institute of Materials Engineering, National Taiwan Ocean University)
  • Received : 2012.11.23
  • Accepted : 2013.04.18
  • Published : 2013.09.01
⟨ Previous Next ⟩

Abstract

Mortar microstructure is considered as a three-phase composite material, which is cement paste, fine aggregate and interfacial transition zone. Interfacial transition zone is the weakest link between the cement paste and fine aggregate, so it has a significant role to determine the properties of cementitious composites. In this study, specimens (w/c = 0.35, 0.45, 0.55) with various volume fractions of fine aggregate ($V_f$ = 0, 0.1, 0.2, 0.3 and 0.4) were cast and tested. To predict the equivalent migration coefficient ($M_e$) and migration coefficient of interfacial transition zone ($M_{itz}$), double-inclusion method and Mori-Tanaka theory were used to estimate. There are two stages to estimate and calculate the thickness of interfacial transition zone (h) and migration coefficient of interfacial transition zone ($M_{itz}$). The first stage, the data of experimental chloride ion migration coefficient ($M_s$) was used to calculate the equivalent migration coefficient of fine aggregate with interfacial transition zone ($M_e$) by Mori-Tanaka theory. The second stage, the thickness of interfacial transition zone (h) and migration coefficient of interfacial transition zone ($M_{itz}$) was calculated by Hori and Nemat-Nasser's double inclusion model. Between the theoretical and experimental data a comparison was conducted to investigate the behavior of interfacial transition zone in mortar and the effect of interfacial transition zone on the chloride migration coefficient, the results indicated that the numerical simulations is derived to the $M_{itz}/M_m$ ratio is 2.11~8.28. Additionally, thickness of interfacial transition zone is predicted from $10{\mu}m$, 60 to $80{\mu}m$, 70 to $100{\mu}m$ and 90 to $130{\mu}m$ for SM30, M35, M45 and M55, respectively.

Keywords

Acknowledgement

Supported by : National Science Council

References

  1. Akcaoglu, T., Tokyay, M. and Celik, T. (2004), "Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression", Cement Concrete Compos., 26(6), 633-638. https://doi.org/10.1016/S0958-9465(03)00092-1
  2. Akcaoglu, T., Tokyay, M. and Celik, T. (2005), "Assessing the ITZ microcracking via scanning electron microscope and its effect on the failure behavior of concrete", Cement Concrete Compos., 35(2), 358-363. https://doi.org/10.1016/j.cemconres.2004.05.042
  3. Andrade, C. (1993), "Calculation of chloride diffusion coefficients in concrete from ionic migration measurements", Cement Concrete Res., 23(3), 724-742. https://doi.org/10.1016/0008-8846(93)90023-3
  4. Asbridge, A.H., Page, C.L. and Page, M.M. (2002), "Effects of metakaolin, water/binder ratio and interfacial transition zones on the microhardness of cement mortars", Cement Concrete Res., 32(9), 1365-1369. https://doi.org/10.1016/S0008-8846(02)00798-6
  5. Bentur, A. and Alexander, M.G.D. (2000), "Review of the work of the RILEM TC 159-ETC: Engineering of the interfacial transition zone in cementitious composites", Mater. Struct., 33(2), 82-87. https://doi.org/10.1007/BF02484160
  6. Bentz, D.P., Garboczi, E.J. and Lagergren, E.S. (1998), "Multi-scale microstructural modeling of concrete diffusivity: identification of significant variables", Cement, Concrete Aggregates J., 20(1), 129-139. https://doi.org/10.1520/CCA10446J
  7. Bruggeman, D.A.G. (1935), "Dielectric constant and conductivity of mixtures of isotropic materials", Annal. Phys., 24, 636-679.
  8. Cho, S.W. (2002), "Study of chloride-ion transport behavior in cement-based composites using accelerated chloride migration test", Ph.D. Dissertation, National Taiwan Ocean University, Taiwan.
  9. Dridi, W. (2012), "Analysis of effective diffusivity of cement based materials by multi-scale modelling", Mater. Struct., 46(1-2), 313-326.
  10. Hobbs, D.W. (1999), "Aggregate influence on chloride ion diffusion into concrete", Cement Concrete Res., 29, 1995-1998. https://doi.org/10.1016/S0008-8846(99)00188-X
  11. Lee, K.M. and Park, J.H. (2008), "A numerical model for elastic modulus of concrete considering interfacial transition zone", Cement Concrete Res., 38(3), 396-402. https://doi.org/10.1016/j.cemconres.2007.09.019
  12. Lyubimova, T.Y. and Pinus, E.R. (1962), "Crystallization structure in the contact zone between aggregate and cement", Concr. Kolloidn. Z. (USSR), 24(5), 578-587.
  13. Martin-Perez, B., Lounis, Z. and Naus, D.J. (2003), "Numerical modelling of service life of reinforced concrete structures", Actas del 2nd International RILEM Workshop of Life Prediction and Aging Management of Concrete Structures, Paris, France, May.
  14. Meijers, S.J.H., Bijen, J.M.J.M., De Borst, R. and Fraaij, A.L.A. (2001), "Computational modelling of chloride ion transport in reinforced concrete", Heron, 46(3), 207-216.
  15. Mori, T. and Tanaka, K. (1973), "Average stress in matrix and average elastic energy of materials with misfitting inclusions", Acta Metallurgica, 21(5), 571-574. https://doi.org/10.1016/0001-6160(73)90064-3
  16. Nemat-Nasser, S. and Hori, M. (1993), Overall properties of Heterogeneous Materials, Elsevier Science Ltd, North-Holland.
  17. Parrot, L.J. and Killoh, D.C (1984), "Prediction of cement hydration", Chemistry and Chemically-related Properties of Cement, 35, 41-53.
  18. Shah, S.P. (2000), "High performance concrete-workability", Strength and Durability, the Hong Kong University of Science and Technology, Hong Kong.
  19. Simeonov, P. and Ahmad, S. (1995), "Effect of transition zone on the elastic behavior of cement-based composities", Cement Concrete Res., 25(1), 165-176. https://doi.org/10.1016/0008-8846(94)00124-H
  20. Ulrik Nilsen, A. and Monteiro, P. (1993), "Concrete: a three phase material", Cement Concrete Res., 23(1), 147-151. https://doi.org/10.1016/0008-8846(93)90145-Y
  21. Yang, C.C. (1998), "Effect of the transition zone on the elastic moduli of mortar", Cement Concrete Res., 28(5), 727-736. https://doi.org/10.1016/S0008-8846(98)00035-0
  22. Yang, C.C. and Su, J.K. (2002), "Approximate migration coefficient of interfacial transition zone and the effect of aggregate content on the migration coefficient of mortar", Cement Concrete Res., 32(10), 1559-65. https://doi.org/10.1016/S0008-8846(02)00832-3
  23. Yang, C.C. (2003), "The relationship between charge passed and the chloride concentrations in anode and cathode cells using the accelerated chloride migration test", Mater. struct., 36(10), 678-684. https://doi.org/10.1007/BF02479502
  24. Yang, C.C. and Liang, C.H. (2009), "The influence of medium-high temperature on the transport properties of concrete by using accelerated chloride migration test", Mater. Chem. Phys., 114(2-3), 670-675. https://doi.org/10.1016/j.matchemphys.2008.10.023

Cited by

  1. Chloride diffusion study in different types of concrete using finite element method (FEM) vol.2, pp.1, 2014, https://doi.org/10.12989/acc2014.2.1.039
  2. Transport of chloride through saturated soil column: An experimental study vol.4, pp.2, 2015, https://doi.org/10.12989/aer.2015.4.2.105
  3. Influence of flexural loading on chloride ingress in concrete subjected to cyclic drying-wetting condition vol.15, pp.2, 2015, https://doi.org/10.12989/cac.2015.15.2.183