DOI QR코드

DOI QR Code

Recovery of Lithium and Leaching Behavior of NCM Powder by Hydrogen Reductive Treatment from NCM System Li-ion Battery Scraps

NCM계(係) 리튬이온전지(電池) 공정(工程)스크랩의 수소환원처리(水素還元處理)에 의한 리튬회수(回收) 및 NCM 분말(粉末)의 침출거동(浸出擧動)

  • Received : 2012.11.05
  • Accepted : 2013.03.21
  • Published : 2013.06.30

Abstract

A study on the recovery of lithium and leaching behavior of NCM powder by hydrogen reduction for NCM system Li-ion battery scraps was investigated. The reductive rate was about 93% at $800^{\circ}C$ by hydrogen treatment. The lithium carbonate with 99% purity was manufactured by using $CO_2$ gas and washing method with water for NCM powder after hydrogen reduction. As a result of comparing the powders before and after the hydrogen reduction treatment for acid leaching behavior we obtained 32% enhanced leaching rate of cobalt, 45% enhanced leaching rate of nickel and the 90% leaching effect for manganese by hydrogen reduction at 2M $H_2SO_4$ concentration condition.

NCM계 폐리튬전지 공정 스크랩 재활용의 연구에 일환으로서 리튬화합물의 회수와 NCM 전구체를 제조하기 위한 침출거동에 대하여 살펴보았다. 이와 같은 목적을 달성하고자 수소를 이용하여 NCM계 스크랩 분말을 환원한 후, 먼저 $CO_2$ 가스로 탄산리튬을 회수하고, 산에 의한 침출거동을 연구하였다. 수소에 의한 환원율은 $800^{\circ}C$에서 약 93%를 나타내었으며, 수세에 의해 약 99%순도의 탄산리튬을 제조하였다. 그리고 수소환원 처리 전후 분말에 대한 산 침출거동을 비교한 결과, 수소환원 처리에 의하여 2M 황산농도에서 코발트 32%, 니켈 45%의 침출효과가 향상되었으며, 망간의 경우에는 약 90% 정도 침출되었다.

Keywords

References

  1. H. C. Jung et al., 2010: Overview and future concerns for lithium-ion batteries materials, J. Korean Powder Metallurgy Institute, 17(3) pp. 175-189. https://doi.org/10.4150/KPMI.2010.17.3.175
  2. H. K. Park, 2008: The research and development trend of cathode materials in lithium ion battery, J. Korean Electrochem. Soc., 11(3), pp. 197-210. https://doi.org/10.5229/JKES.2008.11.3.197
  3. H. S. Hong et al., 2011: Overview and Prospects for cathode materials of lithium secondary batteries, Trend in Metals & Materials Engineering, 24(1), pp. 26-32.
  4. G. C. Shim, 2011: A state of art review on lithium-ion batteries for vehicular applications, Trend in Metals & Materials Engineering, 24(6), pp. 49-64.
  5. J. J. Lee and J. D. Chung, 2010: A study on the cobalt and lithium recovery from the production scraps of lithium secondary battery by high efficient and eco-friendly method, J. Korean Inst. of Resources Recycling, 19(6), pp.51-60.
  6. B. Swain et al., 2005: Recovery of cobalt from waste cathodic active material generated in manufacturing lithium ion batteries by hydrometallugical process, J. Korean Inst. of Resources Recycling, 14(6), pp. 28-36.
  7. C. K. Lee and D. H. Yang, 2001: Recovery of valuable metals from spent lithium ion batteries, J. Korean Ind. Eng. Chem., 12(8), pp. 890-895.
  8. C. K. Lee and N. H. Kim, 2001: Reductive leaching of $LiCoO_2$ in a sulfuric acid solution, J. Korean Inst. of Resources Recycling, 10(6), pp. 9-14.
  9. C. K. Lee and T. H. Kim, 2000: Leaching of cathodic active materials from spent lithium ion battery, J. Korean Inst. of Resources Recycling, 9(4), pp.37-43.
  10. L. Li et al., 2010: Environmental friendly leaching reagent for cobalt and lithium recovery from spent lithium-ion batteries, Waste Management, 30, pp. 2615-2621. https://doi.org/10.1016/j.wasman.2010.08.008
  11. Y. Yamaji et al., 2011: A novel flow sheet for processing of used lithium-ion batteries for recycling, Resource Processing, 58, pp. 9-13. https://doi.org/10.4144/rpsj.58.9
  12. C. Liang et al., 2011: Separation and recovery of Ni, Co, and Mn from spent lithium-ion batteries, The Chinese Journal of Nonferrous Metals, 21(5), pp. 1192-1198.
  13. M. Petranikova et al., 2011: Cobalt recovery from spent portable lithium accumulators after thermal treatment, Acta Metallugica Slovaca, 17(2), pp. 106-115.
  14. E. M. Garcia, et al., 2011: Electrochemical recycling of cobalt from spent cathodes of lithium-ion batteries: its application as coating on SOFC interconnects, J. Appl. Electrochem, 41, pp. 1373-1379. https://doi.org/10.1007/s10800-011-0339-3
  15. T. Georgi-Maschler et al., 2012: Development of a recycling process for Li-ion batteries, J. of Power Sources, 207, pp. 173-182. https://doi.org/10.1016/j.jpowsour.2012.01.152
  16. S. K. Kim et al., 2011: The high efficient physical and chemical treatment of spent lithium ion battery module of electric vehicle for recovery of valuable metals, The 2011 spring meeting and 36the conference, Korean Inst. of Resources Recycling, pp. 84-89.
  17. R. Kononov, 2008: Carbothermal solid state reduction of manganese oxide and ores in different gas atmospheres, Ph. D. thesis, The University of New South Wales.

Cited by

  1. Fabrication of nanosized cobalt powder from Cobalt(II) hydroxide of spent lithium ion battery vol.415, 2017, https://doi.org/10.1016/j.apsusc.2016.12.111