DOI QR코드

DOI QR Code

A Study on the Post-buckling Behavior of Slit Type FLD(Force Limiting Device)

슬릿형 응력제한장치(FLD)의 좌굴 후 거동에 관한 연구

  • Oh, Young Suk (School of Architectural Engineering, DaeJeon University) ;
  • Kim, Cheol Hwan (School of Architecture and Civil Engineering, Kyungpook National University) ;
  • Kim, Chae Yeong (School of Architectural Engineering, DaeJeon University) ;
  • Chae, Won Tak (School of Architectural Engineering, Kyungpook National University)
  • 오영석 (대전대학교, 건축공학과) ;
  • 김철환 (경북대학교, 건축토목공학부) ;
  • 김채영 (대전대학교, 건축공학과) ;
  • 채원탁 (경북대학교, 건축도시환경공학부)
  • Received : 2013.05.28
  • Accepted : 2013.07.30
  • Published : 2013.10.27

Abstract

This research is about design of slit type FLD which secure the buckling stability of compressive brace. 4 slit type and 8 slit type specimens were experimented by pure compressive loading. Comparing the experiment results with FEA results, the good correspondence is appeared each other. Also for deriving strength-displacement formular, an unit section of slit type FLD is transferred to idealized sandwich section. This formular explains satisfactorily experiment results, in given condition. The result of this research will be used as basic data in FLD design.

본 연구는 압축가새의 변형을 FLD부분에 집중시켜 압축가새의 좌굴안정성을 확보하는 슬릿형 FLD에 관한 것이다. 4개 및 8개의 슬릿형 실험체를 슬릿길이 별로 단순압축실험하였다. 그 결과를 유한요소해석과 비교 검토하여 해석의 유효성을 입증하였다. 또한 전단면을 구성하는 단위요소를 이상화된 샌드위치 단면으로 치환하여, 슬릿개수와 슬릿길이를 변수로 하는 압축력과 축방향 변형의 관계식을 유도하였다. 이 식은 주어진 범위 내에서 실험결과와 좋은 대응을 보인다. 본 연구는 FLD설계의 기본데이터로써 이용 될 수 있다.

Keywords

References

  1. 박만우, 주영규, 김명한, 김지영, 김상대(2008) 고강도강 비좌굴 가새의 구조성능 평가, 한국강구조학회논문집, 한국강구조학회, 제20권, 제1호, pp.33-42. Park, M.W., Ju, Y.K., Kim, M.H., Kim, J.Y., and Kim, S.D. (2008) Structural Performance Evaluation of Buckling-Restrained Braces Made of High-Strength Steels, Journal of Korean Society of Steel Construction, KSSC, Vol. 20, No. 1, pp. 33-42 (in Korean).
  2. 김도현, 주영규, 김명한, 성우기, 김상대(2009) 하이브리드 비좌굴 가새의 진동제어능력에 관한 실험적 연구, 한국강구조학회논문집, 한국강구조학회, 제21권, 제1호, pp.83-91. Kim, D.H., Ju, Y.K., Kim, M.H., Sung, W.G., and Kim, S.D. (2009) Experimental Study on the Vibration Control Capacity of Hybrid Buckling- Restrained Braces, Journal of Korean Society of Steel Construction, KSSC, Vol. 21, No. 1, pp.83-91 (in Korean).
  3. 김철환, 채원탁, 오영석, 김채영(2013) 좌굴전 항복유도장치(FLD) 개발에 관한 연구, 한국강구조학회논문집, 한국강구조학회, 제25권, 제3호, pp.279-287. Kim, C.H., Chae, W. T., Oh, Y.S., and Kim, C.Y. (2013) A Study on the Develioment of Force Limiting Devices (FLD) which Induce Yielding before Elastic Buckling, Journal of Korean Society of Steel Construction, KSSC, Vol. 25, No. 3, pp. 279-287 (in Korean). https://doi.org/10.7781/kjoss.2013.25.3.279
  4. Geraed Andrew Roger Parke (1988) The behaviour of space truss incorporating novel compression members, Ph.D Thesis, Department of civil eng., University of Surrey, UK.
  5. Schmidt, L.C. and Hanaor, A. (1979) Force Limiting Devices in Space Trusses, Journal of the Structural Division ASCE, Vol. 105, No. ST5, pp.939-951.
  6. Motohide Tada (1993) A study on the combined non-linear analysis of space truss and improvement of seismic capacity by buckling control system, Ph.D Thesis, Osaka university, Japan.
  7. Ramberg, W. and Osgood, W.R. (1943) Description of stress-strain curves by three parameters. Technical Note No. 902, National Advisory Committee For Aeronautics, Washington DC.
  8. Shanley, F.R. (1946) The Column Paradox, Journal of the Aeronautical Sciences, Vol. 13, No. 12, pp.678. https://doi.org/10.2514/8.11478
  9. Shanley, F.R. (1947) Inelastic Column Theory, Journal of the Aeronautical Sciences, Vol. 14, No. 5, pp.261-268. https://doi.org/10.2514/8.1346

Cited by

  1. A Study on the Development of Force Limiting Devices of Folded Plate Type vol.26, pp.6, 2014, https://doi.org/10.7781/kjoss.2014.26.6.571
  2. 단면절삭형 응력제한 장치의 개발에 관한 연구 vol.27, pp.1, 2013, https://doi.org/10.7781/kjoss.2015.27.1.077
  3. Experimental and Numerical Study of a Tube in Tube Force Limiting Device vol.20, pp.4, 2013, https://doi.org/10.1007/s13296-020-00372-y