Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

A Development of Creative Capstone Design Education

창의적 캡스톤 디자인 교육 방법 개발

  • Yoon, Seok-Beom (Department of Optical Engineering, Kongju National University) ;
  • Jang, Eun-Young (Division of Electrical-Electronics&Control Engineering, Kongju National University)
  • 윤석범 (공주대학교 광공학과) ;
  • 장은영 (공주대학교 전기전자제어공학부)
  • Received : 2014.09.02
  • Accepted : 2014.12.10
  • Published : 2014.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper discusses the creative capstone design education in Kongju National University and introduce a new operational capstone design education method. The result products are evaluated by self-evaluation and performance assessment that is based on the operational method and procedure of the project. The capstone design teams are comprised of 2~3 students with a individual major accomplishments. All teams are satisfied the criteria of evaluation. And their's self-satisfaction and questionaries are totally 3.88~4.44 point out of 5. Compared with the conduct of previous capstone design project that was not the industry affiliate, it provides students with industrial experience in design and development of industrial solution. And industrial partner must provide funds for student team to design, fabrication and test in next time.

본 논문은 공주대학교에서 실시된 창의적 캡스톤 디자인 교육에 대해 알아보고 새로운 방법을 개발한다. 결과물은 수행 프로젝트의 진행 방법과 과정과 과정을 기반으로 자체평가와 수행평가로 평가하였다. 구성된 팀들은 각 전공 분야의 지식을 갖고 있는 2~3명 이내로 하였다. 프로젝트에 참여한 모든 팀은 자체 평가 기준을 만족시켰으며 전반적인 만족도는 항목별로 5점 만점에 3.88~4.44로 긍정적으로 평가되었다. 기존의 비 산업체 참여와는 다르게 캡스톤 디자인 및 개발 진행에 산업체의 참여가 있었다. 향후에는 캡스톤 디자인 프로젝트를 진행하면서 디자인, 제작 및 시제품 테스트 등에 기업체 지원을 받아 진행하여야 한다.

Keywords

References

  1. Yong Se Kim, "Basic Designers Qualities Education in Creative Engineering Design Course", Proceedings of the KSME 2006 Conference, pp. 3209-3213, 2006.
  2. Sang Won Lee, "Interdisciplinary Capstone Design Education", Proceedings of the KSME 2010 Autumn Annual Meeting, pp. 4524-4527, 2010.
  3. S. K. Cho, K. W. Koh, K. C. Koh, "The Application of Educational Robot to Engineering Educations for Creativity and Design", Proceedings of KSPE Conference, pp. 311-312, 2009.
  4. Chang Beom Shin, "The teaching method for design curriculumns using capstone-design", Korea HCI Society Proceeding, pp. 565-568, 2013.
  5. Seok-Beom Yoon, Eun-Young Jang, "The Application of Micro Controller Board to Engineering Education for Multidisciplinary Capstone Design", J. of Digital Convergence, Vol. 12, No. 2, pp. 531-537, 2014. https://doi.org/10.14400/JDC.2014.12.2.531
  6. Su-Ho Jang, Jun-Young Lee, Seung-Ryul Mareng, Eun-Young Jang, Seok-Beom Yoon, "Gesture Recognition Based on the Microprocessor Using Kinect", Proceeding of the KIPEE Conference 2014, No. 1, pp. 130-131, 2014.
  7. L. Thigpen E. Glakpe, G. Gomes, and T. Mcsloud "A Mode for Teaching Multidisciplinary Capstone Design In Mechanical Engineering," 34th ASEE/IEEE frontiers in education Conference S2G-16, 2004.
  8. L. Buchley, M. Eisenberg, J. Catchen, and A. Coockett, "The Lilypad Arduino : Using Computational Textile, to Investigate Engagement, Aesthetics, and Diversity in Computer Science Education, CHI 2008 proceedings, Aesthetics, Awareness, and Sketching, pp. 423-432, 2008.
  9. R. R. DeLyser, R. W. Quine, P. J. Rullkoetter, D. F. Anmentrout, "A Sophomore Capstone Course In Measurement and Automated Data Acquisition", IEEE, Trans/ Educ, Vol. 47, No. 4 pp. 453-458, 2004. https://doi.org/10.1109/TE.2004.825539
  10. J. Goldberg, V. Cariapa, G. Corliss, and K. Kaiser, "The Benefits of Industry Involvement in the Multidisciplinary Capstone Design Course at Marquette University", 2012 Capstone Design Conference, 2012.
  11. Eun-Young Jang, "A Study on the operating Management Method of Creative Engineering Design and Project Based Capstone Design for the Purpose of Improvement in the Quality of Engineering Education", J. of Practical Engineering Education, Vol. 2, No. 2, pp. 266-271, 2010.

Cited by

  1. Research on International Cooperation Education Plan in game design vol.13, pp.7, 2015, https://doi.org/10.14400/JDC.2015.13.7.315
  2. Case Study on Capstone Design Model for Computer Engineering vol.14, pp.5, 2016, https://doi.org/10.14400/JDC.2016.14.5.57
  3. A study on Performance Oriented Industry-University Cooperation Convergence Program Model Based on Empirical Analysis of Satisfaction Evaluation for Family Companies vol.13, pp.5, 2015, https://doi.org/10.14400/JDC.2015.13.5.9
  4. A Study on the Curriculum by the Process of Actual Use of 3D printer -Focus on the College of Design- vol.14, pp.6, 2016, https://doi.org/10.14400/JDC.2016.14.6.381
  5. Study on the Scanimation Expression Using Color Scheme vol.14, pp.12, 2016, https://doi.org/10.14400/JDC.2016.14.12.451
  6. Cultural Tourism Product Development Research of Muju Taekwondo Institute vol.14, pp.2, 2016, https://doi.org/10.14400/JDC.2016.14.2.351
  7. Study of SW Education in University to enhance Computational Thinking vol.14, pp.4, 2016, https://doi.org/10.14400/JDC.2016.14.4.1
  8. The Case Study on Convergence Education in Akita International University vol.14, pp.6, 2016, https://doi.org/10.14400/JDC.2016.14.6.371
  9. A Study on Developing Communication Courses to Enhance Undergraduates' Core Competence vol.14, pp.10, 2016, https://doi.org/10.14400/JDC.2016.14.10.9
  10. Metal Sculpture Research Applying Aesthetic Factor of 'Counting Stars at Night' by Yoon Dong Ju vol.14, pp.2, 2016, https://doi.org/10.14400/JDC.2016.14.2.345