Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Stress Analysis of Plate-Spring-Type Landing Gear Materials

판스프링형 랜딩기어의 재질에 따른 응력 해석

  • Received : 2012.12.28
  • Accepted : 2014.02.04
  • Published : 2014.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Aircraft are an indispensable mode of modern transportation. They are also used as in a wide variety of other fields. For example, aircraft are used for accommodating passengers, carrying freight, and for military reconnaissance. Aircraft ground operations include landing and taking off. During landing, a higher load is applied to the landing gear than during takeoff. The landing gear should absorb impact energy and prevent damage to the main body of the aircraft in the case of an accident. In this study, simulations were performed for two types of plate-spring-type landing gear: that made of composite materials and that constructed with aluminum. The structural safety of landing gear made of each material was also evaluated.

오늘날 비행기는 없어서는 안 되는 교통수단 중의 하나이다. 비행기는 교통 수단 뿐 만 아니라 여러 분야에서 널리 사용되고 있다. 예를 들어, 사람을 태우고, 짐을 실어 나르고, 군에서는 정찰 등의 임무를 수행하게 된다. 지상에서 이륙 착륙이 이루어 진다. 이륙할 때 보다는, 착륙할 시 랜딩기어에 많은 하중이 작용하게 된다. 착륙장치는 충격 에너지를 흡수하며, 사고 시에 동체가 파손되지 않도록 방지한다. 본 논문에서는 복합재와, 알루미늄을 적용한 판 스프링형 랜딩기어에 대하여 시뮬레이션을 수행하였다. 두 가지 재료의 랜딩기어에 대한 구조적 안전성이 평가되었다.

Keywords

References

  1. Shin, J. W., Kim, T.-U., Hwang, I.-H., Jo, J. J., Lee, J.-S. and Park, C.-Y., 2010 "Design Development Test of Crashworthiness Device for Landing Gear," Trans. Korean Soc. Mech. Eng. A, Vol. 34, No. 1, pp. 111-116. https://doi.org/10.3795/KSME-A.2010.34.1.111
  2. Park, I.-K., Kim, S.-J., Ahn, S.-M. and Song, J.-H., 2010 "Aircraft Landing Gear Spin-up, Spring-Back Load Analysis Using" Proceeding of KSME Autumn Symposium, pp. 886-891.
  3. Kim, D.-M., Hur, M.-K. and Lee, K.-B., 1994, "Composite Leaf Spring for Landing Gear" Proceeding of KASA Symposium, pp. 353-357.
  4. Lee, S. Y., Kim, J.-B., Um, M.-K., Kim, T.K. and Shin, J.W., 2008, "Applicability of Composite Torque Link at Helicopter Landing Gear System" Proceeding of KSME Spring Symposium, pp. 572-577.
  5. Choi, S.-W. and Park, I.-K., 2005 "A Landing Characteristics Analysis of the Composite Landing Gear of the Firefly," Korea Aerospace Research Institute, Aerospace Engineering and Technology, Vol.4 No. 2, pp. 15-20.
  6. STANG-4671(EDITION 1).
  7. 'Patran' User's Manual version 2010.
  8. 'Hypermesh 10' User's Manual.

Cited by

  1. Study on the Linear Static Structural Analysis Error of Helical Compression Springs vol.40, pp.2, 2016, https://doi.org/10.3795/KSME-A.2016.40.2.237