Carbon letters

Korean Carbon Society (한국탄소학회)
권호 표지
DOI QR코드

DOI QR Code

Study on lowering the percolation threshold of carbon nanotube-filled conductive polypropylene composites

  • Park, Seung Bin (Lotte Chemical Research Center) ;
  • Lee, Moo Sung (School of Applied Chemical Engineering, Chonnam National University) ;
  • Park, Min (Soft Innovative Materials Research Center, Korea Institute of Science and Technology)
  • Received : 2014.02.02
  • Accepted : 2014.02.28
  • Published : 2014.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Conductive polymer composites (CPCs) consist of a polymeric matrix and a conductive filler, for example, carbon black, carbon fibers, graphite or carbon nanotubes (CNTs). The critical amount of the electrically conductive filler necessary to build up a continuous conductive network, and accordingly, to make the material conductive; is referred to as the percolation threshold. From technical and economical viewpoints, it is desirable to decrease the conductive-filler percolation-threshold as much as possible. In this study, we investigated the effect of polymer/conductive-filler interactions, as well as the processing and morphological development of low-percolation-threshold (${\Phi}c$) conductive-polymer composites. The aim of the study was to produce conductive composites containing less multi-walled CNTs (MWCNTs) than required for pure polypropylene (PP) through two approaches: one using various mixing methods and the other using immiscible polymer blends. Variants of the conductive PP composite filled with MWCNT was prepared by dry mixing, melt mixing, mechanofusion, and compression molding. The percolation threshold (${\Phi}c$) of the MWCNT-PP composites was most successfully lowered using the mechanofusion process than with any other mixing method (2-5 wt%). The mechanofusion process was found to enhance formation of a percolation network structure, and to ensure a more uniform state of dispersion in the CPCs. The immiscible-polymer blends were prepared by melt mixing (internal mixer) poly(vinylidene fluoride) (PVDF, PP/PVDF, volume ratio 1:1) filled with MWCNT.

Keywords

References

  1. Feng J, Chan CM. Carbon black-filled immiscible blends of poly(vinylidene fluoride) and high density polyethylene: electrical properties and morphology. Polym Eng Sci, 38, 1649 (1998). http://dx.doi.org/10.1002/pen.10335.
  2. Potschke P, Bhattacharyya AR, Janke A. Morphology and electrical resistivity of melt mixed blends of polyethylene and carbon nanotube filled polycarbonate. Polymer, 44, 8061 (2003). http://dx.doi.org/10.1016/j.polymer.2003.10.003.
  3. Wu M, Shaw LL. On the improved properties of injection-molded, carbon nanotube-filled PET/PVDF blends. J Power Sources, 136, 37 (2004). http://dx.doi.org/10.1016/j.jpowsour.2004.04.016.
  4. Wu M, Shaw L. Electrical and mechanical behaviors of carbon nanotube-filled polymer blends. J Appl Polym Sci, 99, 477 (2006). http://dx.doi.org/10.1002/app.22255.
  5. Xu HP, Dang ZM, Yao SH, Jiang MJ, Wang D. Exploration of unusual electrical properties in carbon black/binary-polymer nanocomposites. Appl Phys Lett, 90, 152912 (2007). http://dx.doi.org/10.1063/1.2723644.
  6. Han JH. Current Status on Synthesis of Carbon Nanotubes and Their Applications to Conducting Polymer. Polymer Science and Technology, 16, 162 (2005).
  7. Yi XS, Wu G, Ma D. Property balancing for polyethylene-based carbon black-filled conductive composites. J Appl Polym Sci, 67, 131 (1998). http://dx.doi.org/10.1002/(SICI)1097-4628(19980103)67:1<131::AID-APP15>3.0.CO;2-4.
  8. Leclere P, Lazzaroni R, Gubbels F, Calberg F, Dubois P, Jerome R, Bredas JL. Carbon black-filled polymer blends: a scanning probe microscopy characterization. MRS Online Proc Lib, 457, 475 (1996). http://dx.doi.org/10.1557/PROC-457-475.
  9. Andrews R, Jacques D, Minot M, Rantell T. Fabrication of carbon multiwall nanotube/polymer composites by shear mixing. macromolecular materials and engineering, 287, 395 (2002). http://dx.doi.org/10.1002/1439-2054(20020601)287:6<395::AID-MAME395>3.0.CO;2-S.
  10. Ajayan PM, Stephan O, Colliex C, Trauth D. Aligned carbon nanotube arrays formed by cutting a polymer resin--nanotube composite. Science, 265, 1212 (1994). http://dx.doi.org/10.1126/science.265.5176.1212.
  11. Calvert P. Nanotube composites: a recipe for strength. Nature, 399, 210 (1999). http://dx.doi.org/10.1038/20326.
  12. Smuckler JH, Finnerty PM. Performance of conductive carbon blacks in a typical plastics system. Adv Chem Ser, 134, 171 (1974). http://dx.doi.org/10.1021/ba-1974-0134.ch017.
  13. Verhelst WF, Wolthuis KG, Voet A, Ehrburger P, Donnet JB. The role of morphology and structure of carbon blacks in the electrical conductance of vulcanizates. Rubber Chem Technol, 50, 735 (1977). http://dx.doi.org/10.5254/1.3535171.
  14. Gubbels F, Jerome R, Teyssie P, Vanlathem E, Deltour R, Calderone A, Parente V, Bredas JL. Selective localization of carbon black in immiscible polymer blends: a useful tool to design electrical conductive composites. Macromolecules, 27, 1972 (1994). http://dx.doi.org/10.1021/ma00085a049.
  15. Runyan WR. Semiconductor Measurements and Instrumentation, McGraw-Hill, New York, NY (1975).
  16. Masci G, Aulenta F, Crescenzi V. Uniform-sized clenbuterol molecularly imprinted polymers prepared with methacrylic acid or acrylamide as an interacting monomer. J Appl Polym Sci, 83, 2660 (2002). http://dx.doi.org/10.1002/app.10232.
  17. Miller B. Intumescents, FR efficiency pace flame retardant gains. Plastics World, 54, 73 (1996).

Cited by

  1. Characterization and influence of shear flow on the surface resistivity and mixing condition on the dispersion quality of multi-walled carbon nanotube/polycarbonate nanocomposites vol.16, pp.2, 2015, https://doi.org/10.5714/CL.2015.16.2.086
  2. Electromagnetic interference shielding in 1–18 GHz frequency and electrical property correlations in poly(vinylidene fluoride)–multi-walled carbon nanotube composites vol.17, pp.31, 2015, https://doi.org/10.1039/C5CP02585K
  3. Flexural properties, interlaminar shear strength and morphology of phenolic matrix composites reinforced with xGnP-coated carbon fibers vol.17, pp.1, 2016, https://doi.org/10.5714/CL.2016.17.1.033
  4. Phenylethynyl-terminated polyimide, exfoliated graphite nanoplatelets, and the composites: an overview vol.19, 2016, https://doi.org/10.5714/CL.2016.19.001
  5. Thermally Conductive-Silicone Composites with Thermally Reversible Cross-links vol.8, pp.22, 2016, https://doi.org/10.1021/acsami.6b03065
  6. The effect of graphite and carbon black ratios on conductive ink performance vol.52, pp.16, 2017, https://doi.org/10.1007/s10853-017-1114-6
  7. Highest recorded electrical conductivity and microstructure in polypropylene–carbon nanotubes composites and the effect of carbon nanofibers addition vol.8, pp.5, 2018, https://doi.org/10.1007/s13204-018-0750-8