Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Design of a Force Applying System for a Smart-phone Curved Glass Molding System and Its Characteristic Test

스마트폰 곡면유리 성형시스템의 가압장치 설계 및 곡면유리 성형특성실험

  • Kim, Hyeon-Min (Department of Control & Instrumentation Engineering, Gyeongsang National University) ;
  • Hong, Tae-Kyung (Department of Control & Instrumentation Engineering, Gyeongsang National University) ;
  • Jung, Dong-Yean (Deaho Technology Korea, Co., Ltd.) ;
  • Lee, Yeon-Hyeong (Deaho Technology Korea, Co., Ltd.) ;
  • Park, Jea-Hyun (Deaho Technology Korea, Co., Ltd.) ;
  • Kim, Gab-Soon (Department of Control & Instrumentation Engineering, Gyeongsang National University)
  • Received : 2013.12.11
  • Accepted : 2014.03.31
  • Published : 2014.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the design of a force applying system for a smart phone curved glass molding system and its characteristic test. The force applying system is composed of a motor and gear, a rectilinear movement structure, a force sensor, an LVDT (Linear Variable Differential Transformer) sensor, an up and down moving block, and so on. The system precisely controls the applying force and time to the plane glass because the glass can be easily destroyed under applied force, and can be bent imperfectly. As a result of the characteristic test, the curved glass can be manufactured using this system, and the holding time under 0N force, the applying force to the plane glass, the time for applying from 0N to maximum force, and the holding time under maximum force at the manufacture feasible temperature $620^{\circ}C$ were found.

Keywords

References

  1. K. H. Kuk, G. S. Kim, and D. Y. Jung, "Development of a convective sequential production system for aspheric lens," Journal of the Korea Society for Precision Engineering, vol. 28, no. 2, pp. 2002-2010, 2011.
  2. K. H. Kuk, K. S. Kim, and D. Y. Chong, "Temperature analysis of the production system for aspherical lens and optimization of production conditions," Proc. of KSPE 2008 Spring Conference, pp. 51-52, 2008.
  3. G. H. Kuk, D. Y. Jung, and G. S. Kim, "Development of molding system for manufacturing a small lens and its force control," Journal of the Korea Society for Precision Engineering, vol. 25, no. 2, pp. 57-64, 2008.
  4. D. Y. Jung and Y. H. Lee, "Moulding device of curved glass," The Korean Intellectual Property Office, the Application Number 10-2013-0126308, 2013.
  5. D. Y. Jung and Y. H. Lee, "Pre-heating device of curved glass moulding device," The Korean Intellectual Property Office, the Application Number 10-2013-0126312, 2013.
  6. D. Y. Jung and Y. H. Lee, "Moulding device," The Korean Intellectual Property Office, the Application Number 10-2013-0126307, 2013.
  7. H. J. Shin, J. K. Lee, Y. J. Bang, K, G, Lee, D. Y. Jung, Y. H. Lee, W. J. Chung, and G. S. Kim, "Thermal analysis of molding system for mobile device cover glass," Proc. of KSPE 2013 Spring Conference, pp. 765-766, 2013.
  8. H. J. Shin, J. K. Lee, Y. J. Bang, K, G, Lee, D. Y. Jung, Y. H. Lee, W. J. Chung, and G. S. Kim, "Heat flux conditions for uniform temperature distribution of mobile device cover glass mold," Proc. of KSPE 2013 Spring Conference, pp. 763-764, 2013.
  9. G. S. Kim, H. M. Kim, Y. W. Song, D. Y. Jung, Y. H. Jung, Y. H. Lee, and J. H. Park, "Design of pressurized system for curved glass forming," Proc. of KSPE 2012 Autumn Conference, pp. 651-652, 2012.
  10. G. S. Kim, H. M. Kim, Y. W. Song, D. Y. Jung, Y. H. Jung, Y. H. Lee, and J. H. Park, "Development of force and position measuring system of the pressure system for manufacturing a smart Phone's curved," Proc. of KSPE 2013 Spring Conference, pp. 773-774, 2013.
  11. S. B. Kim, W. J. Chung, D. S. Lee, M. S. Kim, D. Y. Jung, and J. H. Park, "Optimal design of 2.5D glass manufacturing automation equipment's molding transfer unit using TRIZ," Proc. of KSPE 2013 Spring Conference, pp. 777-778, 2013.
  12. ATI Industrial Automation, "Multi-Axis Forcre/Torque Sensor," ATI Industrial Automation, pp. 4-45, 2005.
  13. G. S. Kim and J. W. Yoon, "Development of calibration system for multi-axis force/moment sensor and its uncertainty evaluation," Journal of the Korea Society for Precision Engineering, vol. 24, no. 10, pp. 91-98, 2007.