DOI QR코드

DOI QR Code

Batch and Flow-Through Column Studies for Cr(VI) Sorption to Activated Carbon Fiber

  • Lee, In (Environmental Functional Materials & Biocolloids Laboratory, Seoul National University) ;
  • Park, Jeong-Ann (Environmental Functional Materials & Biocolloids Laboratory, Seoul National University) ;
  • Kang, Jin-Kyu (Environmental Functional Materials & Biocolloids Laboratory, Seoul National University) ;
  • Kim, Jae-Hyun (Environmental Functional Materials & Biocolloids Laboratory, Seoul National University) ;
  • Son, Jeong-Woo (Environmental Functional Materials & Biocolloids Laboratory, Seoul National University) ;
  • Yi, In-Geol (Environmental Functional Materials & Biocolloids Laboratory, Seoul National University) ;
  • Kim, Song-Bae (Environmental Functional Materials & Biocolloids Laboratory, Seoul National University)
  • Received : 2014.03.10
  • Accepted : 2014.05.27
  • Published : 2014.06.30

Abstract

The adsorption of Cr(VI) from aqueous solutions to activated carbon fiber (ACF) was investigated using both batch and flow-through column experiments. The batch experiments (adsorbent dose, 10 g/L; initial Cr(VI) concentration, 5-500 mg/L) showed that the maximum adsorption capacity of Cr(VI) to ACF was determined to 20.54 mg/g. The adsorption of Cr(VI) to ACF was sensitive to solution pH, decreasing from 9.09 to 0.66 mg/g with increasing pH from 2.6 to 9.9; the adsorption capacity was the highest at the highly acidic solution pHs. Kinetic model analysis showed that the Elovich model was the most suitable for describing the kinetic data among three (pseudo-first-order, pseudo-second-order, and Elovich) models. From the nonlinear regression analysis, the Elovich model parameter values were determined to be ${\alpha}$ = 162.65 mg/g/h and ${\beta}$ = 2.10 g/mg. Equilibrium isotherm model analysis demonstrated that among three (Langmuir, Freundlich, Redlich-Peterson) models, both Freundlich and Redlich-Peterson models were suitable for describing the equilibrium data. In the model analysis, the Redlich-Peterson model fit was superimposed on the Freundlich fit. The Freundlich model parameter values were determined to be $K_F$ = 0.52 L/g and 1/n = 0.56. The flow-through column experiments showed that the adsorption capacities of ACF in the given experimental conditions (column length, 10 cm; inner diameter, 1.5 cm; flow rate, 0.5 and 1.0 mL/min; influent Cr(VI) concentration, 10 mg/L) were in the range of 2.35-4.20 mg/g. This study demonstrated that activated carbon fiber was effective for the removal of Cr(VI) from aqueous solutions.

Keywords

References

  1. Richard FC, Bourg A. Aqueous geochemistry of chromium: a review. Water Res. 1991;25:807-816. https://doi.org/10.1016/0043-1354(91)90160-R
  2. Zhitkovich A. Chromium in drinking water: sources, metabolism, and cancer risks. Chem. Res. Toxicol. 2011;24:1617-1629. https://doi.org/10.1021/tx200251t
  3. Sharma SK, Petrusevski B, Amy G. Chromium removal from water: a review. J. Water Supply: Res. Technol. AQUA 2008;57:541-553. https://doi.org/10.2166/aqua.2008.080
  4. Albadarin AB, Mangwandi C, Al-Muhtaseb AA, Walker GM, Allen SJ, Ahmad MN. Kinetic and thermodynamics of chromium ions adsorption onto low-cost dolomite adsorbent. Chem. Eng. J. 2012;179:193-202. https://doi.org/10.1016/j.cej.2011.10.080
  5. Suzuki M. Activated carbon fiber: fundamentals and applications. Carbon 1994;32:577-586. https://doi.org/10.1016/0008-6223(94)90075-2
  6. Osmond NM. Activated carbon fibre adsorbent materials. Adsorpt. Sci. Technol. 2000;18:529-539. https://doi.org/10.1260/0263617001493594
  7. Ko YG, Choi US, Kim JS, Park YS. Novel synthesis and characterization of activated carbon fiber and dye adsorption modeling. Carbon 2002;40:2661-2672. https://doi.org/10.1016/S0008-6223(02)00168-9
  8. Park SJ, Jang YS. Preparation and characterization of activated carbon fibers supported with silver metal for antibacterial behavior. J. Colloid Interface Sci. 2003;261:238-243. https://doi.org/10.1016/S0021-9797(03)00083-3
  9. Harry ID, Saha B, Cumming IW. Effect of electrochemical oxidation of activated carbon fiber on competitive and noncompetitive sorption of trace toxic metal ions from aqueous solution. J. Colloid Interface Sci. 2006;304:9-20. https://doi.org/10.1016/j.jcis.2006.08.012
  10. Li K, Li Y, Zheng Z. Kinetics and mechanism studies of p-nitroaniline adsorption on activated carbon fibers prepared from cotton stalk by $NH_4H_2PO_4$ activation and subsequent gasification with steam. J. Hazard. Mater. 2010;178:553-559. https://doi.org/10.1016/j.jhazmat.2010.01.120
  11. Zhang L, Wan L, Chang N, et al. Removal of phosphate from water by activated carbon fiber loaded with lanthanum oxide. J. Hazard. Mater. 2011;190:848-855. https://doi.org/10.1016/j.jhazmat.2011.04.021
  12. Ko KR, Ryu SK, Park SJ. Effect of ozone treatment on Cr(VI) and Cu(II) adsorption behaviors of activated carbon fibers. Carbon 2004;42:1864-1867. https://doi.org/10.1016/j.carbon.2004.02.033
  13. Park SJ, Kim YM. Influence of anodic treatment on heavy metal ion removal by activated carbon fibers. J. Colloid Interface Sci. 2004;278:276-281. https://doi.org/10.1016/j.jcis.2004.06.004
  14. Ko YG, Choi US. Observation of metal ions adsorption on novel polymeric chelating fiber and activated carbon fiber. Sep. Purif. Technol. 2007;57:338-347. https://doi.org/10.1016/j.seppur.2007.03.028
  15. Aggarwal D, Goyal M, Bansal RC. Adsorption of chromium by activated carbon from aqueous solution. Carbon 1999;37:1989-1997. https://doi.org/10.1016/S0008-6223(99)00072-X
  16. Park SJ, Park BJ, Ryu SK. Electrochemical treatment on activated carbon fibers for increasing the amount and rate of Cr(VI) adsorption. Carbon 1999;37:1223-1226. https://doi.org/10.1016/S0008-6223(98)00318-2
  17. Mohan D, Singh KP, Singh VK. Trivalent chromium removal from wastewater using low cost activated carbon derived from agricultural waste material and activated carbon fabric cloth. J. Hazard. Mater. 2006;135:280-295. https://doi.org/10.1016/j.jhazmat.2005.11.075
  18. Park SJ, Jung WY. Removal of chromium by activated carbon fibers plated with copper metal. Carbon Sci. 2001;2:15-21.
  19. Huang L, Zhou S, Jin F, Huang J, Bao N. Characterization and mechanism analysis of activated carbon fiber felt-stabilized nanoscale zero-valent iron for the removal of Cr(VI) from aqueous solution. Colloids Surf. A Physicochem. Eng. Asp. 2014;447:59-66. https://doi.org/10.1016/j.colsurfa.2014.01.037
  20. Cardenas-Lopez C, Camargo G, Giraldo L, Moreno-Pirajan JC. Design of an adsorbent employing activated carbon fiber to remove lead. Eclet. Quim. 2007;32:61-71.
  21. Bajpai SK, Armo MK. Equilibrium sorption of hexavalent chromium from aqueous solution using iron(III)-loaded chitosan-magnetite nanocomposites as novel sorbent. J. Macromol. Sci. A Pure Appl. Chem. 2009;46:510-520. https://doi.org/10.1080/10601320902797764
  22. Zhang L, Hong S, He J, Gan F, Ho YS. Adsorption characteristic studies of phosphorus onto laterite. Desalination Water Treat. 2011;25:98-105. https://doi.org/10.5004/dwt.2011.1871
  23. Halsey G. Physical adsorption on non-uniform surfaces. J Chem. Phys. 2004;16:931-937.

Cited by

  1. Removal of Co(II) from aqueous solutions by sulfonated magnetic multi-walled carbon nanotubes vol.32, pp.11, 2015, https://doi.org/10.1007/s11814-015-0072-4
  2. Combination of maghemite and titanium oxide nanoparticles in polyvinyl alcohol-alginate encapsulated beads for cadmium ions removal vol.32, pp.6, 2015, https://doi.org/10.1007/s11814-014-0333-7
  3. Performance and mechanisms for removal of perfluorooctanoate (PFOA) from aqueous solution by activated carbon fiber vol.5, pp.106, 2015, https://doi.org/10.1039/C5RA15853B
  4. Chromium(III) recovery from tanning wastewater by adsorption on activated carbon and elution with sulfuric acid vol.22, pp.2, 2016, https://doi.org/10.4491/eer.2016.070
  5. Breakthrough modeling of furfural sorption behavior in a bagasse fly ash packed bed vol.25, pp.1, 2020, https://doi.org/10.4491/eer.2018.407