Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Design Modifications of a Glass Cutting Machine for the Improved Stability

가공정도 향상을 위한 Glass Cutting Machine의 설계 개선

  • Kwon, In-Hwan (Department of Intelligent Mechanical Enginnering, Kumoh National Institute of Technology) ;
  • Ro, Seung-Hoon (Department of Intelligent Mechanical Enginnering, Kumoh National Institute of Technology) ;
  • Park, Yu-Ra (Department of Intelligent Mechanical Enginnering, Kumoh National Institute of Technology) ;
  • Yi, Il-Hwan (Department of Intelligent Mechanical Enginnering, Kumoh National Institute of Technology) ;
  • Kil, Sa-Geun (Department of Intelligent Mechanical Enginnering, Kumoh National Institute of Technology) ;
  • Park, Keun-Woo (Justek, inc.)
  • Received : 2014.06.09
  • Accepted : 2014.06.27
  • Published : 2014.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Touch panels are widely used in the modern display industry as the cover glass of smart mobile phones and tablet PCs. Glass cutting machines are commonly used to cut the panels into their proper sizes. Vibration of these glass cutting machines is assumed to be the main factor leading to the creation of burrs, notches, cracks, scratches and chips on the cut surfaces, eventually causing defects of the cover glass. In this study, the vibrations of a glass cutting machine used for the shearing of cover glass components were analyzed through an experiment and a computer simulation. The structural properties leading to vibration were also analyzed in an effort to determine design alterations which can suppress these vibrations. Moreover, each design alteration was applied to a computer simulation model to determine the effect of different alteration on suppressing vibration. The results show that simple design alterations can substantially suppress vibrations of glass cutting machines.

Keywords

References

  1. Ro S. H., "Mechanical Vibrations with Applications", Chaosbook, 2013
  2. Ro S. H. and Lee J. H., "Design Alteration of A Lathe Structure for the Improved Dynamic Stability", J. Korean Society of Industrial Application, Vol 12, pp. 91-99, 2009
  3. Fertis D. G., "Mechanical and Structural Vibrations", John Wiley & Sons, Inc., New York, pp. 197-241, 1995
  4. Ewins D. J., "Modal Testing", Bruel & Kjaer, 1986
  5. Randall R. B., "Frequency Analysis", Bruel & Kjaer, 1977
  6. McConnell K. G., "Vibration Testing", John Wiley & Sons, Inc., New York, 1995
  7. Havosen W. G. and Brown D. L., "Journal of Sound and Vibration", 1977
  8. Ro S. H. and Cho H. J. and Choi E. H., "Analysis of the Free Vibrations of Rectangular Plates Using Database", Trans. of the KSME (A), Vol 24, No. 8, pp. 1978-1990, 2000
  9. Cho H. J. and Ro S. H., "Effect of Design Parameters on the Uniform and the Nonuniform Cantilever Beams", Trans. of the KSME (A), Vol 23, No. 4, pp. 697-708, 1999

Cited by

  1. 스마트 기기용 강화유리&사파이어 유리 전용 가공기의 진동해석을 통한 설계 개선에 관한 연구 vol.15, pp.2, 2016, https://doi.org/10.14775/ksmpe.2016.15.2.051