Journal of Korean Society for Quality Management (품질경영학회지)

Korean Society for Quality Management (한국품질경영학회)
권호 표지
DOI QR코드

DOI QR Code

On Feasibility Study of the Charged Particle Beam Pretreatment Process for Non-conducting Metal Coating

무전도 금속 증착을 위한 하전 입자빔 전처리 공정의 타당성 연구

  • Received : 2014.03.02
  • Accepted : 2014.06.09
  • Published : 2014.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: Since several problems were found when present non-conducting metal coating process was applied to mass production, we study and develop to improve those problems. Methods: In this paper, a couple of analysis methods such as surface hardness, XPS spectrum analysis, morphology, and reflection ratio were used. Results: This paper suggest a new possibility of Non-conducting thin metal coating method that has quality of mass production phase without UV coating process. Conclusion: By the result of analysis, we can set optimized process conditions of the electro deposition coating using electron beam.

Keywords

References

  1. Azuma, H. 2005. "Coating on Plastics Treated by Laser Ablation without Primer." R&D Review of Toyota CRDL 40(2):50.
  2. Azuma, H. et al. 2008. "New Surface Treatment of Polymers by Simultaneous Exposure to Vacuum Ultra-Violet Light and Nanometric-Sized Particles." Jpn. J. Appl. Phys. 43(10):1250.
  3. Charbonnier, M. et al. 1999. "New approaches for electroless plating processes by activation of polymer surface using low pressure plasma and dielectric-barrier discharge devices." The 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, Newark, New Jersey, December 2-3.
  4. Fracassi, F. 2006. "Surface modification of polymers and metals with low temperature plasma." The 3rd Mikkeli International Industrial Coating Seminar, Mikkeli, Finland, March 17-19.
  5. Kang, H. et al. 2004. "The Z-CUSUM Control Chart for the Process with Recurring Cycles or Frequent Small Shifts." Journal of the Korea Society for Quality Management 32(2):132-153.
  6. Kim, J., and Kim, S. 2012. "Local $T^{2}$ Control Charts for Process Control in Local Structure and Abnormal Distribution Data." Journal of the Korea Society for Quality Management 40(3):337-346. https://doi.org/10.7469/JKSQM.2012.40.3.337
  7. Matthée, T. et al. 1999. "Metallization of polymers by plasma pretreatment followed by an electroplating process." The 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, Newark, New Jersey, December 2-3.
  8. Skelly, J. "Metallization of Plastics." Techinical Review.
  9. Shimshock , P. 2006. "Optical Coatings on Plasics." The 3rd Mikkeli International Industrial Coating Seminar, Mikkeli, Finland, March 17-19.
  10. Skelly, J. 2008. "Decorative Plating Processes for Common Plastic Resins." Metalfinishing.
  11. Subramanyam, T. et al. 2006. "Non-conductive Radio Frequency Transparent Metallic Looking Coatings." The 3rd Mikkeli International Industrial Coating Seminar, Mikkeli, Finland, March 17-19.