DOI QR코드

DOI QR Code

Anti-Corrosion Characteristics of WC-based Alloy Coatings Fabricated by HVOF Process - Polarization Characteristics in Acid Solution -

HVOF 용사법에 의해 제조된 WC계 합금 코팅층의 방식특성(I) - 산성용액에서의 분극특성 -

  • Kim, Tae-Yong (Graduate School of Pukyong National University) ;
  • Kim, Yeong-Sik (Department of Mechanical & Automotive Engineering, Pukyong National University)
  • Received : 2014.01.22
  • Accepted : 2014.07.22
  • Published : 2014.08.31

Abstract

The aim of this study to investigate polarization characteristics of WC-based alloy coatings fabricated by high velocity oxygen fuel(HVOF) process. The coatings were fabricated by HVOF process with WC-CrC-Ni, WC-Co-Cr, WC-Co composite powders. Corrosion tests were carried out using potentiostat/galvanostat at solution with pH 2 and pH 6. Corrosion potential(Ecorr) and corrosion current density(Icorr) could be analyzed from polarization curve. WC-Co-Cr coating showed more incorrodible characteristics than other coatings at solution pH 2. WC-CrC-Ni coating was more favorable anti-corrosion characteristics than other coatings at solution with pH 6.

Keywords

References

  1. H. S. Sidhu, B. S. Sidhu and S. Prakash, 2006, "Mechanical and microstructure properties of HVOF sprayed WC-Co and $Cr_3C_2$-NiCr coatings on the boiler tube steels using LPG as the fuel gas", Journal of Materials Processing Technology, Vol. 171, pp. 77-82. https://doi.org/10.1016/j.jmatprotec.2005.06.058
  2. B. S. Mann and V. Arya, 2003, "HVOF coating and surface treatment for enhancing droplet erosion resistance of steam turbine blades", Wear, Vol. 254, pp. 652-667. https://doi.org/10.1016/S0043-1648(03)00253-9
  3. T. Sahraoui, et al., 2004, "Alternative to chromium: characteristics and wear behavior of HVOF coatings for gas turbine shafts repair (heavy-duty)", Journal of Materials Processing Technology, Vol. 152, pp. 43-55. https://doi.org/10.1016/j.jmatprotec.2004.02.061
  4. M. Jafari, et al., 2013, "Improvement in tribological properties of HVOF sprayed WC-Co coatings using electroless Ni-P coated feedstock powders", Surface and Coatings Technology, Vol. 235, pp. 310-317. https://doi.org/10.1016/j.surfcoat.2013.07.059
  5. J. G. L. Barbera-Sosa, et al., 2013, "Fatigue behavior of a structural steel coated with a WC-10Co-4Cr/Colmonoy 88 deposit by HVOF thermal spraying", Surface and Coatings Technology, Vol. 220, pp. 248-256. https://doi.org/10.1016/j.surfcoat.2012.05.098
  6. W. Zorawski and S. J. Skrzypek, 2013, "Tribological properties of plasma and HVOF-sprayed NiCrBSi-$Fe_2O_3$ composite coatings", Surface and Coatings Technology, Vol. 220, pp. 282-289. https://doi.org/10.1016/j.surfcoat.2012.09.057
  7. A. F. Baldissera, C. A. Ferreira, 2012, "Coatings based on electronic conducting polymers for corrosion protection of metals", Progress in Organic Coatings, Vol. 75, pp. 241-247. https://doi.org/10.1016/j.porgcoat.2012.05.004
  8. J. Xu, et al., 2009, "Erosion-corrosion behavior of nano-particle-reinforced Ni matrix composite alloying layer by duplex surface treatment in aqueous slurry environment", Corrosion Science, Vol. 51, pp. 1055-1068. https://doi.org/10.1016/j.corsci.2009.02.029
  9. T. Rogne, 1996, "The importance of corrosion on the erosion-corrosion performance of thermal spray ceramic-tetallic coatings" Journal of Thermal Spray Technology, Vol. 8, pp. 207-215.
  10. H. L. Lovelock, 1998, "Powder/Processing/Structure Relationships in WC-Co Thermal spray Coatings", Journal of Thermal Spray Technology, Vol. 7, No. 3, pp. 357-373. https://doi.org/10.1361/105996398770350846
  11. J. E. Cho, S. Y. Hwang and K. Y. Kim, 2006, "Corrosion behavior of thermal sprayed WC cermet coatings having various metallic binders in strong acidic environment", Surface & Coatings Technology, Vol. 200, pp. 2653-2662. https://doi.org/10.1016/j.surfcoat.2004.10.142

Cited by

  1. Anti-Corrosion Characteristics of WC-based Alloy Coatings Fabricated by HVOF Process - Polarization Characteristics in Alkaline Solution - vol.18, pp.6, 2014, https://doi.org/10.9726/kspse.2014.18.6.040