DOI QR코드

DOI QR Code

Glucose Sensors Using Lipoic Acid Self-Assembled Monolayers

  • Kim, Ji Yeong (Department of Materials Science and Engineering, Inha University) ;
  • Nakayama, Tadachika (Extreme Energy-Density Research Institute, Nagaoka University of Technology) ;
  • Kim, Jae-Hun (Department of Materials Science and Engineering, Inha University) ;
  • Kim, Sang Sub (Department of Materials Science and Engineering, Inha University)
  • Received : 2014.07.03
  • Accepted : 2014.09.22
  • Published : 2014.09.30

Abstract

A novel approach to fabricating high-performance glucose sensors is reported, which is based on the process of self-assembled monolayers (SAMs). In this study, we have particularly used ${\alpha}$-lipoic acid (LA) SAMs for the glucose sensors. To our best knowledge, this study is the first one to use LA as SAMs for this purpose. N-hydroxysuccinimide (NHS) and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) were deliberately attached at the same time on the LA SAM. Then, glucose oxidase ($GO_X$) and horseradish peroxidase (HRP) were sequentially immobilized. Thus, the HRP/$GO_X$/NHS-EDC/LA-SAM/Au/Cr/glass working electrode was developed. The glucose-sensing capability of the fabricated sensor was systematically measured by the use of cyclic voltammetry in the range of 1-30 mM glucose in phosphate-buffered saline. The result showed a good sensitivity, that is, as high as $27.5{\mu}A/(mM{\cdot}cm^2)$. This result conspicuously demonstrates that LA can be one of promising substances for use as SAMs for accurately monitoring trace levels of glucose concentration in human blood.

Keywords

References

  1. N. S. Oliver, C. Toumazou, A. E. G. Cass, and D. G. Johnston, "Glucose sensors: A review of current and emerging technology", Diabetic Med., Vol. 26, p. 197, 2009. https://doi.org/10.1111/j.1464-5491.2008.02642.x
  2. E. H. Yoo and S. Y. Lee, "Glucose biosensors: An overview of use in clinical practice", Sensors, Vol. 10, pp. 4558-4576, 2010. https://doi.org/10.3390/s100504558
  3. E. Murphy-Perez, S. K. Arya, and S. Bhansali, "Vapor-liquid-solid grown silica nanowire based electrochemical glucose biosensor", Analyst, Vol. 136, p. 1686, 2011. https://doi.org/10.1039/c0an00977f
  4. D. Pradhan, F. Niroui, and K. T. Leung, "High-performance, flexible enzymatic glucose biosensor based on ZnO nanowires supported on a gold-coated polyester substrate", ACS Appl. Mater. & Interfaces., Vol. 2, pp. 2409-2412, 2010. https://doi.org/10.1021/am100413u
  5. X. Kang, Z. Mai, X. Zou, P. Cai, and J. Mo, "A sensitive nonenzymatic glucose sensor in alkaline media with a copper nanocluster/multiwall carbon nanotube-modified glassy carbon electrode", Anal. Biochem., Vol. 363, pp. 143-150, 2007. https://doi.org/10.1016/j.ab.2007.01.003
  6. J. D. Qiu, W. M. Zhou, J. Guo, R. Wang, and R. P. Liang, "Amperometric sensor based on ferrocene-modified multiwalled carbon nanotube nanocomposites as electron mediator for the determination of glucose", Anal. Biochem., Vol. 385, pp. 264-269, 2009. https://doi.org/10.1016/j.ab.2008.12.002
  7. A. S. N. Murthy and J. Sharma, "Glucose oxidase bound to self-assembled monolayers of bis(4-pyridyl) disulfide at a gold electrode: Amperometric determination of glucose", Anal. Chim. Acta., Vol. 363, pp. 215-220, 1998. https://doi.org/10.1016/S0003-2670(98)00083-X
  8. R. K. Shervedani, A. H. Mehrjardi, and N. Zamiri, "A novel method for glucose determination based on electrochemical impedance spectroscopy using glucose oxidase self-assembled biosensor", Bioelectrochemistry, Vol. 69, pp. 201-208, 2006. https://doi.org/10.1016/j.bioelechem.2006.01.003
  9. M. Fang, P. S. Grant, M. J. McShane, G. B. Sukhorukov, V. O. Golub, and Y. M. Lvov, "Magnetic bio/nanoreactor with multilayer shells of glucose oxidase and inorganic nanoparticles", Langmuir, Vol. 18, pp. 6338-6344, 2002. https://doi.org/10.1021/la025731m
  10. T. Hoshi, N. Sagae, K. Daikuhara, K. Takahara, and J. Anzai, "Multilayer membranes via layer-by-layer deposition of glucose oxidase and Au nanoparticles on a Pt electrode for glucose sensing", Mater. Sci. Eng. C-Mater. Biol. Appl., Vol. 27, pp. 890-894, 2007. https://doi.org/10.1016/j.msec.2006.10.004
  11. H. Xu, K. Malladi, C. Wang, L. Kulinsky, M. Song, and M. Madou, "Carbon post-microarrays for glucose sensors", Biosens. Bioelectron., Vol. 23, pp. 1637-1644, 2008. https://doi.org/10.1016/j.bios.2008.01.031
  12. Y. S. Chi, S. M. Kang, and I. S. Choi, "Surface engineering based on self-assembled monolayers", Polym. Sci. Technol. Vol. 17, pp. 172-181, 2006.
  13. R. G. Nuzzo and D. L. Allara, "Adsorption of bifunctional organic disulfides on gold surfaces", J. Am. Chem. Soc., Vol. 105, pp. 4481, 1983. https://doi.org/10.1021/ja00351a063
  14. L. Packer, E. H. Witt, and H. J. Tritschler, "Alpha-lipoic acid as a biological antioxidant", Free Radic. Biol. Med., Vol. 19, pp. 227-250, 1995. https://doi.org/10.1016/0891-5849(95)00017-R
  15. M. Delvaux, A. Walcarius, and S. Demoustier-Champagne, "Bienzyme HRP-GOx-modified gold nanoelectrodes for the sensitive amperometric detection of glucose at low overpotentials", Biosens. Bioelectron., Vol. 20, pp. 1587-1594, 2005. https://doi.org/10.1016/j.bios.2004.07.017
  16. J. J. Gooding, L. Pugliano, D. B. Hibbert, and P. Erokhin, "Amperometric biosensor with enzyme amplification fabricated using self-assembled monolayers of alkanethiols: the influence of the spatial distribution of the enzymes", Electrochem. Commun., Vol. 2, pp. 217-221, 2000. https://doi.org/10.1016/S1388-2481(00)00003-5

Cited by

  1. Glucose Sensing Properties of Electrospinning-Synthesized ZnO Nanofibers vol.25, pp.12, 2015, https://doi.org/10.3740/MRSK.2015.25.12.655