Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental Study on Heat Transfer Characteristics of Binary Working Fluid for Clean Large Cauldron Using Liquid-Vapor Phase Change Heat

기-액 상변화 열전달을 이용한 대형 조리용기 개발을 위한 2 성분 작동유체의 열전달 특성실험

  • Received : 2014.04.21
  • Accepted : 2014.07.15
  • Published : 2014.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes preliminary research conducted for developing a high-efficiency clean large cauldron using the liquid-vapor phase change heat transfer. To improve the isothermal environment of the cauldron, naphthalene and FC-40 were selected as the working fluids to operate well in the temperature range of $100-200^{\circ}C$ and used in experimental investigations of the heat transfer characteristics. A two-phase closed thermosyphon was designed and built to demonstrate the functionality of the working fluids. Startup, boiling, and condensation tests were performed, and the test results were used to examine the possibility of complementary effects of the startup and heat transfer characteristics of the two-phase closed thermosyphon using a mixture of naphthalene and FC-40.

본 연구는 고효율 청정 조리용기 개발을 위한 기초 연구로서 기-액 상변화를 이용하여 조리용기의 등온성을 향상시키고자 $100-200^{\circ}C$의 작동온도 범위에 적합한 작동유체를 선정하고 이들 작동유체의 열전달 특성실험을 수행하였다. 이를 위하여 2 상 밀폐 열사이폰을 제작하고 두 가지 작동유체에 대한 비등 및 응축 열전달 특성과 시동특성에 대한 실험하였으며, 실험 결과로부터 2 가지 유체를 혼합한 2 성분 유체 열사이폰의 시동 및 열전달 성능의 상호 보완 가능성을 분석하였다.

Keywords

References

  1. Kim, J. M., Han, S. H. and Baek, S. H., 1997, "Comparison of Aluminum Leaching from Cooking Utensils During Cooking," Journal of Food Sci. Tech., pp. 613-617.
  2. Jung, T. S. and Kang, H. K., 2013, "Experimental Study on Heat Transfer Characteristics for Materials of Large Cauldron," Proceedings of KSPE Conference, Spring, pp. 933-934.
  3. Park, K. H., Lee, Y. S., Ra, H. S. and Chung, W. B., 2006," An Experimental Study on the Operating Characteristics of the Naphthalene and Dowtherm Heat Pipe" Proceedings of KSME Conference, spring, pp.1966-1971.
  4. Lee, Y. S., Park, K. H., Ra, H. S., Chang, K.C. and Kang, H. K., 2005, "Study on the Working Fluid Characteristics of Medium Temperature Heat Pipe," Proceedings of SAREK Conference, winter, pp.687-692.
  5. Hong, S. E. and Kang, H. K., 2006, "A Study on the Chilling Start-up Characteristics and Performance of a Gas Loaded Heat Pipe," Journal of SAREK, Vol. 18 No.11, pp. 915-922.
  6. Jung, E. K., Boo, J. H. and Chung, W. B., 2003, "An Experimental Study of a Heat pipe Binary Mixture Working Fluid for Solar Collector" Proceedings of KSME Conference, fall, pp.13-18.