Journal of the Korean Society of Propulsion Engineers (한국추진공학회지)

The Korean Society of Propulsion Engineers (한국추진공학회)
권호 표지
DOI QR코드

DOI QR Code

Polymerization Behavior of Self-healing Agents for Damage Repair in Composite Materials

복합재 손상보수용 자가치료제의 중합 거동

  • Oh, Jinoh (Department of Mechanical Engineering, Kumoh National Institute of Technology) ;
  • Yoon, Sungho (Department of Mechanical Engineering, Kumoh National Institute of Technology) ;
  • Jang, Seyong (The 7th R&D Institute?2, Agency for Defense Development)
  • Received : 2014.08.20
  • Accepted : 2014.09.19
  • Published : 2014.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Thermal analysis properties and adhesive properties of self-healing agents were evaluated through differential scanning calorimetry, reaction heat measurement, and adhesive shear test. D1E0, D3E1, D1E1, D1E3, and D0E1, depending on the mixing ratio of DCPD and ENB, were considered as self-healing agents. The amount of Grubbs' catalyst, depending on the type of self-healing agents, was varied from 0.1 wt% to 1.5 wt%. In the case of DCPD, the polymerization reaction occurred faster and the stabilized adhesive strength increased as the amount of catalyst increased; however, a large amount of catalyst was required. ENB had excellent reactivity with a small amount of the catalyst; however, high reaction heat was observed at the early stage of polymerization. Thermal analysis properties and adhesive properties of self-healing agents can be controlled by varying a mixing ratio of DCPD and ENB. Among the self-healing agents used for this study, the D3E1 would be one of the most preferable candidates with regard to maximum adhesive strength, reaching time to maximum adhesive strength, stabilized adhesive strength, and reaction heat.

본 연구에서는 시차주사열량계시험, 반응열시험, 접착전단시험을 통해 자가치료제의 열분석 특성과 접착 특성을 평가하였다. 자가치료제는 DCPD와 ENB의 혼합비에 따라 D1E0, D3E1, D1E1, D1E3, D0E1을 고려하였다. 촉매는 Grubbs' catalyst를 자가치료제의 종류에 따라 0.1 wt%에서 1.5 wt%까지 적용하였다. DCPD의 경우는 촉매 양이 많을수록 중합반응이 빠르고 안정화된 접착강도가 높아지지만 많은 양의 촉매가 요구된다. ENB의 경우 촉매와의 반응성이 우수하여 적은 양의 촉매로도 빠른 중합반응을 얻을 수 있지만 반응열이 높게 나타난다. DCPD와 ENB의 혼합비를 변화시키면 자가치료제의 열분석 특성 및 접착 특성을 조절할 수 있으며 본 연구에서 고려한 자가치료제 중 D3E1가 최대접착강도, 최대접착강도에 도달하는 시간, 안정화된 접착강도, 반응열 측면에서 자가치료제로 가장 유리함을 알 수 있다.

Keywords

References

  1. White, S.R., Sottos, N.R., Geubelle, P.H., Moore, J.S., Kessler, M.R., Sriram, S.R., Brown, E.N. and Viswanathan, S., "Autonomic Healing of Polymer Composite Materials," Nature, Vol. 409, No. 6825, pp. 794-797, 2001. https://doi.org/10.1038/35057232
  2. Kessler, M.R. and White, S.R., "Self- Activated Healing of Delamination Damage in Woven Composites," Composites: Part A, Vol. 32, No. 5, pp. 683-699, 2001.
  3. Brandon, E.J., Vozoff. M., Kolawa, E.A., Studor, G.F., Lyons, F., Keller, M.W., Beiermann, B., White, S.R., Sottos, N.R., Curry, M.A., Banks, D.L., Brocato, R., Zhou, N., Jung, S., Jackson, T.N. and Champaigne, K., "Structural Health Management Technologies for Inflatable/ deployable Structures: Integrating Sensing and Self-healing," Acta Astronautica, Vol. 68, Issue 7-8, pp. 883-903, 2011. https://doi.org/10.1016/j.actaastro.2010.08.016
  4. Jin, H., Mangun, C.L., Griffin A.S., Moore, J.S., Sottos, N.R. and White, S.R., "Thermally Stable Autonomic Healing in Epoxy using a Dual-microcapsule System," Journal of Advanced Materials, Vol. 26, Issue 2, pp. 282-287, 2014. https://doi.org/10.1002/adma.201303179
  5. Mookhoek, S.D., Blaiszik, B.J., Fischer, H.R., Sottos, N.R. and White, S.R., "Peripherally Decorated Binary Microcapsules Containing Two Liquids," Journal of Materials Chemistry, Vol. 18, Issue 44, pp. 5390-5394, 2008. https://doi.org/10.1039/b810542a
  6. Sondari, D., Septevani, A.A., Randy, A. and Triwulandari, E., "Polyurethane Microcapsule with Glycerol as the Polyol Component for Encapsulated Self Healing Agent," Journal of Engineering and Technology, Vol. 2, No. 6 pp. 466-471, 2010.
  7. Caruso, M.M., Blaiszik B.J., Jin, H., Schelkop, S.R., Stradley, D.S., Sottos, N.R., White, S.R. and Moore, J.S., "Robust, Double-Walled Microcapsules for Self-Healing Polymeric Materials," ACS Applied Materials Interfaces, Vol. 2, No. 4, pp. 1195-1199, 2010. https://doi.org/10.1021/am100084k
  8. Odom, S.A., Jackson, A.C., Prokup, A.M., Chayanupatkul, S., Sottos, N.R., White, S.R. and Moore, J.S., "Visual Indication of Mechanical Damage Using Core-Shell Microcapsules," ACS Applied Materials Interfaces, Vol. 3, pp. 4547-4551, 2011. https://doi.org/10.1021/am201048a
  9. Noh, H.H. and Lee, J.K., "Microencapsulation of Self-healing Agents Containing a Fluorescent Dye," Express Polymer Letters Vol. 7, No. 1, pp. 88-94, 2013. https://doi.org/10.3144/expresspolymlett.2013.8
  10. Yuan, L., Liang, G.J., Xie, J.Q., Guo, J. and Li, L., "Thermal Stability of Microencapsulated Epoxy Resins with Poly(urea-formaldehyde)," Polymer Degradation and Stability, Vol. 91, Issue 10, pp. 2300-2306, 2006. https://doi.org/10.1016/j.polymdegradstab.2006.04.026
  11. Brown, E.N., White, S.R. and Sottos, N.R., "Microcapsule Induced Toughening in a Self-healing Polymer Composite," Journal of Materials Science, Vol. 39, No. 5, pp. 1703-1710, 2004. https://doi.org/10.1023/B:JMSC.0000016173.73733.dc
  12. Rule, J.D. and Moore, J.S., "ROMP Reactivity of Endo- and Exodicyclopen dadiene," Macromolecules, Vol. 35, No. 21, pp. 7878-7882, 2002. https://doi.org/10.1021/ma0209489
  13. Liu, X., Lee, J.K., Yoon, S.H. and Kessler, M.R., "Characterization of Diene Monomers as Healing Agents for Autonomic Damage Repair," Journal of Applied Polymer Science, Vol. 101, pp. 1266-1272, 2006. https://doi.org/10.1002/app.23245
  14. Cho, S.H., Anderson, M., White, S.R., Sottos, N.R. and Braun, P.V., "Polydimethylsiloxane-based Self-healing Materials," Advanced Materials, Vol. 18, pp. 997-1000, 2006. https://doi.org/10.1002/adma.200501814
  15. Kessler, M.R., Sottos, N.R. and White, S.R., "Self-healing Structural Composite Materials," Composites : Part A, Vol. 34, No. 8, pp. 743-753, 2003. https://doi.org/10.1016/S1359-835X(03)00138-6
  16. Caruso, M.M., Blaiszik, B.J., White, S.R., Sottos, N.R. and Moore, J.S., "Full Recovery of Fracture Toughness Using a Nontoxic Solvent-Based Self-Healing System," Advanced Functional Materials, Vol. 18, Issue 13, pp. 1898-1904, 2008. https://doi.org/10.1002/adfm.200800300
  17. Yoon, S.H., Park, H.W. and Heo, K.S., "Evaluation of Bond Performance of Self-Healing Agents Using Single Lap Shear Test," Journal of Korean Society for Composite Materials, Vol. 17, No. 4, pp. 40-46, 2004.
  18. ASTM D1002, "Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)," Annual Book of ASTM Standards, Vol. 08.01, 2002.
  19. ASTM D2651-01, "Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding," Annual Book of ASTM Standards, Vol. 08.01, 2002.