Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지
DOI QR코드

DOI QR Code

Developing of Sound Absorption Composite Boards Using Carbonized Medium Density Fiberboard

탄화 중밀도섬유판을 이용한 목재흡음판 개발

  • Lee, Min (Department of Forest Products, Korea Forest Research Institute) ;
  • Park, Sang-Bum (Department of Forest Products, Korea Forest Research Institute) ;
  • Byeon, Hee-Seop (College of Agriculture and Life Science, Institute of Agriculture and Life Science, Gyeongsang National University) ;
  • Kim, Jong-In (Southern Forest Research Center, Korea Forest Research Institute)
  • 이민 (국립산림과학원 임산공학부) ;
  • 박상범 (국립산림과학원 임산공학부) ;
  • 변희섭 (경상대학교 농업생명과학대학 농업생명과학연구원) ;
  • 김종인 (국립산림과학원 남부산림자원연구소)
  • Received : 2014.06.18
  • Accepted : 2014.07.08
  • Published : 2014.11.25
Download PDF
⟨ Previous Next ⟩

Abstract

In the previous study, a variety of wood-based panels was thermally decomposed to manufacture carbonized boards that had been proved to be high abilities of insect and fungi repellence, corrosion and fire resistant, electronic shielding, and formaldehyde adsorption as well as sound absorption performance. Based on the previous study, carbonized medium density fiberboard (c-MDF) was chosen to improve sound absorption performance by holing and sanding process. Three different types of holes (cross shape, square shape, and line) with three different sanding thickness (1, 2, and 3 mm) were applied on c-MDF and then determined sound absorption coefficient (SAC). The control c-MDF without holes had 14% of SAC, however, those c-MDFs with holes had 16.01% (square shape), 15.68% (cross shape), and 14.25% (line) of SAC. Therefore, making holes on the c-MDF did not significantly affect on the SAC. As the degree of sanding increased, the SAC of c-MDF increased approximately 65% on sanding treated c-MDFs (21.5, 21.83, and 19.37%, respectively) compared to the control c-MDF (13%). Based on these results, composite sound absorbing panel was developed with c-MDF and MDF (11 mm). The noise reduction coefficient of composite sound absorbing panel was 0.45 which was high enough to certify as sound absorbing material.

선행연구에서 다양한 목질 보드류를 열분해하여 다공질 탄화보드 제조에 성공하였고, 높은 난연성, 전자파차폐성, 원적외선방사, 폼알데하이드 흡착성, 흡음성능을 확인하였다. 본 연구에서는 경제성과 흡음성이 뛰어난 탄화 중밀도 섬유판(MDF)을 선택하여 보다 높은 흡음성능을 부여하기 위해 다른 흡음재료에도 사용 중인 샌딩처리와 타공기법을 시도하였다. 또한 개선된 흡음성능을 바탕으로 실제 음향판을 제작하여 그 음향적 효과를 파악하였다. 탄화 MDF를 십자모양(타공 5개), 직사각형모양(타공 9개), 일자모양(타공 5개)으로 타공 처리한 후, 흡음률을 측정한 결과, 무처리 탄화 MDF의 흡음률은 14% 정도를 나타내었고, 직사각형모양 타공 시편이 16.01%로 흡음률이 가장 높았고 십자모양 타공 시편이 15.68%, 일자 타공 시편은 14.25%의 흡음률을 나타내어 그 효과가 미미하였다. 반면에, 탄화 MDF의 표면을 각 1, 2, 3 mm로 표면샌딩 처리후 흡음률을 측정한 결과, 무처리 시편(13%)에 비해 65% 증가한 21.7% (1 mm 샌딩), 21.83% (2 mm 샌딩), 19.37% (3 mm 샌딩)를 확인하였다. 이 결과를 바탕으로 실대형 탄화보드 복합 음향판을 제작하였으며 잔향실법으로 흡음시험한 결과 감음계수 0.45로 높은 흡음성능을 발휘하여 상업화도 가능할 것으로 판단된다.

Keywords

References

  1. Ahn, B.K., Paik, K.H. 2011. Utilization of charcoal as an environmentally friendly building materials (II) - A study on the energy saving and sound insulation characteristics of building materials prepared with charcoal. Mokchae Konghak 39(1): 41-52. https://doi.org/10.5658/WOOD.2011.39.1.41
  2. ASTM C384-04. 2011. Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method. USA.
  3. ASTM C423-09A. 2009. Standard method for sound absorption and sound absorption coefficients by the reverberation room method. USA.
  4. Byeon, H.S., Park, J.H., Hwang, K.K., Park, H.M., Park, B.S., Chong, S.H. 2010. Sound absorption property of heat-treated wood at a low temperature and vacuum conditions. Journal of The Korean Wood Science and Technology 38(2): 101-107. https://doi.org/10.5658/WOOD.2010.38.2.101
  5. Godshall, W.D., Davis, J.H. 1969. Acoustical absorption properties of wood-based panel materials (No. FSRP-FPL-104). Forest Products LAB, (Madison, WI USA).
  6. Hwang, K.H., Kim, G.H., Park, B.S., Park, J.H., Byeon, H.S., Lee, W.H. 2008. Sound absorption characteristic of resonator by hole position and wood species. Journal of The Korean Wood Science and Technology 36(3): 9-16. https://doi.org/10.5658/WOOD.2008.36.3.009
  7. Kang, C.W., Kang, W., Kim, G.C. 2010. Sound absorption capability and anatomical features of highly sound absorptive wood. Journal of The Korean Wood Science and Technology 38(4): 292-297. https://doi.org/10.5658/WOOD.2010.38.4.292
  8. Kang, C.W., Park, H.J. 2001. Improvement of sound absorption capability of wood and wood-based board by resonant absorption. Journal of The Korean Wood Science and Technology 29(1): 16-21.
  9. Kang, C.W., Park, H.J., Jeon, S.S. 2012. Sound absorption capability and bending strength of miscanthus particle based board. Journal of The Korean Wood Science and Technology 40(1): 38-43. https://doi.org/10.5658/WOOD.2012.40.1.38
  10. Kang, C.W., and Lee, N.H. 2005. Changes of Sound Absorption Capability and Anatomical Features of Wood by Delignification Treatment. Journal of The Korean Wood Science and Technology 33(4): 9-14.
  11. KS F 2805. 2004. Measurement of sound absorption in a reverberation room. South Korea.
  12. KS F 2814-1. 2001. Determination of sound absorption coefficient and impedance in impedance tubes, Part 1: Method using standing wave ratio. South Korea.
  13. Kwon, J.H., Park, S.B., Ayrilmis, N., Kim, N.H., Kwon, S.M. 2013. Electromagnetic interference shielding effectiveness, electrical resistivity and mechanical performance of carbonized medium density fiberboard. Journal of Composite Materials. 47(16): 1951-1958. https://doi.org/10.1177/0021998312452896
  14. Lee, D.H., Seo, S.W., Hong, B.K., Song, H.Y. 2005. A study on the improvement of acoustic absorption of multiple layer perforated panel systems. The Korean Society for Noise and Vibration Engineering. 15(5): 571-577. https://doi.org/10.5050/KSNVN.2005.15.5.571
  15. Lee, M., Park, S.B., Byeon, H.S. 2014. Sound absorption and physical properties of carbonized fiberboards with three different densities. Journal of The Korean Wood Science and Technology 42(5): 555-562. https://doi.org/10.5658/WOOD.2014.42.5.555
  16. Ministry of Environment Act no.559 and Ministry of Land, Infrastructure and Transport Act no.97. 2014. Rule on standard and scope of apartment houses' floor impact sound. Ministry of Environment and Ministry of Land, Infrastructure and Transport. South Korea.
  17. Park, S.B., Lee, S.M., Park, J.Y., Lee, S.H. 2009. Manufacture of Crack-free Carbonized Board from Fiberboard. Journal of The Korean Wood Science and Technology 37(4): 293-299.
  18. Park, S.B., Lee, M., Son, D.W., Lee, S.M., Kim, J.I. 2013. Fire performance of carbonized medium density fiberboard manufactured at different temperatures. Journal of Wood Science 1-6.
  19. Park, S.B., Son, D.W., Suh, J.S., Lee, S.M., Kim, J.I., Lee, M., Byeon, H.S., Oh, S.W., Lim, K.H. 2014. Study on performance improvement of wood-based carbonized boards. Research report 14-07. ISBN 978-89-8176-351-0.
  20. Suh, J.S., Kang, E.C., Park, J.Y. 2004. Manufacturing characteristics of cement-bonded wood composite board as sound absorption type-noise barrier. Journal of The Korean Wood Science and Technology 32(6): 50-56.
  21. Watanabe, T.T., Kinoshita, M.N., Hayashi, H. 1967. Acoustical study of woods and wood products. Journal of Japan Wood Research Society. 13(5): 177-182.
  22. Wassilieff, C. 1996. Sound absorption of wood-based materials. Applied Acoustics 48(4): 339-356. https://doi.org/10.1016/0003-682X(96)00013-8
  23. Woods, k., Byrne, C. 2010. Acoustic property development from wood to carbon composite. Mechanical engineering, Western Kentucky University.
  24. Zhou, H., Li, B., Huang, G. 2006. Sound absorption characteristics of polymer microparticles. Journal of Applied Polymer Science. 101(4): 2675-2679. https://doi.org/10.1002/app.23911