DOI QR코드

DOI QR Code

Factors affecting the properties of recycled concrete by using neural networks

  • Duan, Zhen-Hua (Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University) ;
  • Poon, Chi-Sun (Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University)
  • Received : 2014.02.21
  • Accepted : 2014.11.03
  • Published : 2014.11.28

Abstract

Artificial neural networks (ANN) has been proven to be able to predict the compressive strength and elastic modulus of recycled aggregate concrete (RAC) made with recycled aggregates (RAs) from different sources. However, ANN is itself like a black box and the output from the model cannot generate an exact mathematical model that can be used for detailed analysis. So in this study, sensitivity analysis is conducted to further examine the influence of each selected factor on the output value of the models. This is not only conducive to the determination and selection of the more important factors affecting the results, but also can provide guidance for researchers in adjusting mix proportions appropriately when designing RAC based on the variation of these factors.

Keywords

Acknowledgement

Supported by : Sun Hung Kai Properties Ltd.

References

  1. Ahmed, A.S. (2009), "High quality recycled aggregate concrete", Ph.D. Dissertation, Edinburgh Napier University, Edinburgh.
  2. Barra, M. and Vazquez, E. (1998), "Properties of concrete with recycled aggregates: influence of properties of the aggregates and their interpretation", Proceeding of the International Symposium on Sustainable Construction: Use of Recycled Concrete Aggregate, London, UK, November.
  3. Bassan, M., Quattrone, M. and Basilico, V. (2009), "Usability's perspectives of recycled aggregate concretes (RAC) for structural applications", Sustainable Management of Waste and Recycled Materials in Construction,Wascon, Lyon, France, June.
  4. Belen, G.F., Fernando, M.A., Javier, E.L. and Sindy, S.P. (2011a), "Effect of recycled coarse aggregate on damage of recycled concrete", Mater. Struct., 44(10), 1759-1771. https://doi.org/10.1617/s11527-011-9736-7
  5. Belen, G.F., Fernando, M.A., Diego, C.L. and Sindy, S.P. (2011b), "Stress-strain relationship in axial compression for concrete using recycled saturated coarse aggregate", Constr. Build. Mater., 25(5), 2335-2342. https://doi.org/10.1016/j.conbuildmat.2010.11.031
  6. Bilgehan, M. and Turgut, P. (2010), "The use of neural networks in concrete compressive strength estimation", Comput. Concr., 7(3), 271-283. https://doi.org/10.12989/cac.2010.7.3.271
  7. Bohne, R.A. and Bratteb, H. (2002), "Future C&D waste recycling in Norway - Learning from Danish experience?", Proceedings of International Conference for Sustainable Building, Oslo, September.
  8. Cabo, A.D., Lazaro, C., Gayarre, F.L., Lopez, M.A.S., Serna, P. and Tabares, J.O.C. (2009), "Creep and shrinkage of recycled aggregate concrete", Constr. Build. Mater., 23(7), 2545-2553. https://doi.org/10.1016/j.conbuildmat.2009.02.018
  9. Cachim, P.B. (2007), "Concrete produced using crushed bricks as aggregate", Sustainable Construction, Materials and Practices, in-house publishing Inc., Rotterdam. 950-956.
  10. Casuccio, M., Torrijos, M.C., Giaccio, G. and Zerbino, R. (2008), "Failure mechanism of recycled aggregate concrete", Constr. Build. Mater., 22(7), 1500-1506. https://doi.org/10.1016/j.conbuildmat.2007.03.032
  11. Corinaldesi, V. (2010), "Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates", Constr. Build. Mater., 24(9), 1616-1620. https://doi.org/10.1016/j.conbuildmat.2010.02.031
  12. Corinaldesi, V. (2011), "Structural concrete prepared with coarse recycled concrete aggregate: From investigation to design", Adv. Civil Eng., 2012, 1-6.
  13. de Juan, M.S. and Gutierrez, P.A. (2004), "Influence of recycled aggregate quality on concrete properties", International Conference on Use of Recycled Materials in Building and Structures, Barcelona, Spain, November.
  14. dePauw, P. and Thomas, P. (1998), "Shrinkage and creep of concrete with recycled materials as coarse aggregates", Proceedings of the International Symposium on Sustainable construction: Use of Recycled Concrete Aggregate, London, UK, November.
  15. Deshpande, N., Kulkarni, S.S. and Patil, N. (2011), "Effectiveness of using Coarse Recycled Concrete Aggregate in Concrete", Int. J. Earthq. Sci. Eng., 4(6), 913-919.
  16. Dhir, R.K., Limbachiya, M.C. and Leelawat, T. (1999), "Suitability of recycled concrete aggregate for use in BS 5328 designated mixes", Proceeding of ICE -Struct. Build., 134(3), 257-274. https://doi.org/10.1680/istbu.1999.31568
  17. Dhir, R.K. and Paine, K.A. (2007), "Performance related approach to use of recycled aggregates", WRAP Final Report, Waste and Resources Action Programme.
  18. Dias, W.P.S. and Pooliyadda, S.P. (2001), "Neural networks for predicting properties of concretes with admixtures", Constr. Build. Mater., 15(7), 371-379. https://doi.org/10.1016/S0950-0618(01)00006-X
  19. Duan, Z.H., Kou, S.C. and Poon, C.S. (2013a), "Prediction of compressive strength of recycled aggregate concrete usingartificial neural networks", Constr. Build. Mater., 40, 1200-1206. https://doi.org/10.1016/j.conbuildmat.2012.04.063
  20. Duan, Z.H., Kou, S.C. and Poon, C.S. (2013b), "Using artificial neural networks for predicting the elastic modulus of recycled aggregate concrete", Constr. Build. Mater., 44, 524-532. https://doi.org/10.1016/j.conbuildmat.2013.02.064
  21. Duan, Z.H. and Poon, C.S. (2014a), "Properties of recycled aggregate concrete made with recycled aggregates with different amounts of old adhered mortars", Mater. Des., 58, 19-29. https://doi.org/10.1016/j.matdes.2014.01.044
  22. Duan, Z.H. and Poon, C.S. (2014b), "Research on aggregate characteristics affecting the mechanical properties of recycled aggregate concrete made with recycled aggregates from different sources by using neural networks", Submitted to Constr. Build. Mater..
  23. El-Dash, K.M. and Ramadan, M.O. (2006), "Effect of aggregate on the performance of confined concrete", Cement Concr. Res., 36(3), 599-605. https://doi.org/10.1016/j.cemconres.2005.07.002
  24. Etxeberria, M., Vazquez, E., Mari, A. and Barra, M. (2007), "Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete", Cement Concrete Res., 37(5), 735-742. https://doi.org/10.1016/j.cemconres.2007.02.002
  25. Gomez-Soberon, J.M.V. (2009), "Shrinkage of concrete with replacement of aggregate with recycled concrete aggregate", ACI Spec.Publications, 209, 475-496.
  26. Goncalves, A., Esteves, A. and Vieira, M. (2004), "Influence of recycled concrete aggregates on concrete durability", Conference on the Use of Recycled Materials in Building and Structures, Barcelona, Spain, November.
  27. Goncalves, P. and de Brito, J. (2010), "Recycled aggregate concrete (RAC) - comparative analysis of existing specifications", Mag. Concrete Res., 62(5), 339-346. https://doi.org/10.1680/macr.2008.62.5.339
  28. Guan, J.L.L. (2011), "Effects of recycled aggregates on concrete properties", Master thesis, National University of Singapore.
  29. Hu, M.P. (2007), "Mechanical properties of concrete prepared with different recycled coarse aggregates replacement rate", Concr., 2, 52-54.
  30. Jain, A., Jha, S.K. and Misra, S. (2008), "Modeling and analysis of concrete slump using artificial neural networks", J. Mater. Civil Eng., 20, 628-633. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:9(628)
  31. Khatri, R.P. and Sirivivatnanon, V. (2004), "Characteristic service life for concrete exposed to marine environments", Cement Concrete Res., 34(5), 745-752. https://doi.org/10.1016/S0008-8846(03)00086-3
  32. Knights, J. (1998), "Relative performance of high quality concrete containing recycled aggregates and their use in construction", Proceeding of the International Symposium on Sustainable Construction: Use of Recycled Concrete Aggregate, London, UK, November.
  33. Kotrayothar, D. (2012), "Recycled aggregate concrete for structural application", Ph.D. Dissertation, University of Western Sydney.
  34. Kou, S.C. (2006), "Reusing recycled aggregates in structure concrete", Ph.D. Dissertation, The Hong Kong Polytecnic University, Hong Kong, China.
  35. Kou, S.C. and Poon, C.S. (2008), "Mechanical properties of 5-year-old concrete prepared with recycled aggregates obtained from three different sources", Mag. Concr. Res., 60(1), 57-64. https://doi.org/10.1680/macr.2007.00052
  36. Kou, S.C. and Poon, C.S. (2009), "Properties of concrete prepared with crushed fine stone, furnace bottom ash and fine recycled aggregate as fine aggregates", Constr. Build. Mater., 23(8), 2877-2886. https://doi.org/10.1016/j.conbuildmat.2009.02.009
  37. Kou, S.C. and Poon, C.S. (2011), "Mechanical properties of recycled aggregate concrete prepared with old concrete with different strength grades", RILEM, International Conference on Advances in Construction Materials through Science and Engineering, Hong Kong, September.
  38. Koulouris, A. (2005), "Use of coarse recycled aggregates in designated concrete mixes", Ph.D. Dissertation, The Kingston University, London.
  39. Lu, M., AbouRizk, S. and Hermann, U. (2001), "Sensitivity analysis of neural networks in spool fabrication productivity studies", J. Comput. Civil Eng., 15, 299-308. https://doi.org/10.1061/(ASCE)0887-3801(2001)15:4(299)
  40. Mazloom, M. and Yoosefi, M.M. (2013), "Predicting the indirect tensile strength of self-compacting concrete using artificial neural networks", Comput. Concr., 12(3), 285-301. https://doi.org/10.12989/cac.2013.12.3.285
  41. Meddah, M.S., Zitouni, S. and Belaabes, S. (2010), "Effect of content and particle size distribution of coarse aggregate on the compressive strength of concrete", Constr. Build. Mater., 24(4), 505-512. https://doi.org/10.1016/j.conbuildmat.2009.10.009
  42. Nyarko, M.H., Nyarko, E.K. and Moric, D. (2011), "A neural network based modeling and sensitivity analysis of damage ratio coefficient", Expert. Syst. Appl., 38(10), 13405-13413. https://doi.org/10.1016/j.eswa.2011.04.169
  43. Obispo, S.L. (2011), "Shrinkage & modulus of elasticity in concrete with recycled aggregates", Master Thesis, The California Polytechnic State University, California.
  44. Otsuki, N., ASCE, M., Miyazato, S.I. and Yodsudjai, W. (2003), "Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete", J. Mater. Civil Eng., 15, 443-451. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:5(443)
  45. Padmini, A.K., Ramamurthy, K. and Mathews, M.S. (2009), "Influence of parent concrete on the properties of recycled aggregate concrete", Constr. Build. Mater., 23(2), 829-836. https://doi.org/10.1016/j.conbuildmat.2008.03.006
  46. Poon, C.S., Shui, Z.H., Lam, L., Fok, H. and Kou, S.C. (2004), "Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete", Cement Concrete Res., 34(1), 31-36. https://doi.org/10.1016/S0008-8846(03)00186-8
  47. Rao, M.C., Bhattacharyya, S.K. and Barai, S.V. (2010), "Influence of field recycled coarse aggregate on properties of concrete", Mater. Struct., 44(1), 205-220.
  48. Rashid, M.A., Hossain, T. and Islam, M.A. (2009), "Properties of higher strength concrete made with crushed brick as coarse aggregate", J. Civil Eng., 37(1), 43-52.
  49. Ravindrarajah, R.S. and Tam, C.T. (1985), "Properties of concrete made with crushed concrete as coarse aggregate", Mag. Concr. Res., 37(130), 29-38. https://doi.org/10.1680/macr.1985.37.130.29
  50. Safiuddin, M., Alengaram, U.J., Salam, M.A., Jumaat, M.Z., Jaafar, F.F. and Saad, H.B. (2011), "Properties of high-workability concrete with recycled concrete aggregate", Mater. Res., 14(2), 248-255. https://doi.org/10.1590/S1516-14392011005000039
  51. Sun, Y.M., Chang, T.P. and Liang, M.T. (2011), "Sensitivity analysis of time/depth dependent chloride diffusion coefficient in concrete", J. Mar. Sci. Tech. - TAIW., 19(6), 660-665.
  52. Vieira, J.P.B., Correia, J.R. and de Brito, J. (2011), "Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates", Cement Concrete Res., 41(5), 533-541. https://doi.org/10.1016/j.cemconres.2011.02.002
  53. Yang, K.H., Chung, H.S. and Ashour, A.F. (2008), "Influence of type and replacement level of recycled aggregates on concrete properties", ACI Mater. J., 105(3), 289-296.
  54. Yeh, I.C. (2007), "Modeling slump flow of concrete using second-order regressions and artificial neural networks", Cement Concr. Compos., 29(6), 474-480. https://doi.org/10.1016/j.cemconcomp.2007.02.001
  55. Zega, C.J. and Di Maio, A.A. (2009), "Recycled concrete made with different natural coarse aggregates exposed to high temperature", Constr. Build. Mater., 23(5), 2047-2052. https://doi.org/10.1016/j.conbuildmat.2008.08.017
  56. Zhang, J.Y. and Lounis, Z. (2006), "Sensitivity analysis of simplified diffusion-based corrosion initiation model of concrete structures exposed to chlorides", Cement Concrete Res., 36(7), 1312-1323. https://doi.org/10.1016/j.cemconres.2006.01.015
  57. Zhou, D.L., Zhou, W.L. and Lin, W. (2009), "Analyses of the basic behavior of recycled aggregate and recycled concrete", Ready-mixed Concr., 10, 42-44.

Cited by

  1. Application of soft computing methods for predicting the elastic modulus of recycled aggregate concrete vol.176, 2018, https://doi.org/10.1016/j.jclepro.2017.11.186
  2. Automatic regression methods for formulation of elastic modulus of recycled aggregate concrete vol.64, 2018, https://doi.org/10.1016/j.asoc.2017.12.030
  3. Using artificial neural networks to assess the applicability of recycled aggregate classification by different specifications vol.50, pp.2, 2017, https://doi.org/10.1617/s11527-016-0972-8
  4. Modeling of mechanical properties of roller compacted concrete containing RHA using ANFIS vol.19, pp.4, 2014, https://doi.org/10.12989/cac.2017.19.4.435
  5. Case-based reasoning approach to estimating the strength of sustainable concrete vol.20, pp.6, 2017, https://doi.org/10.12989/cac.2017.20.6.645
  6. Performance assessment of nano-Silica incorporated recycled aggregate concrete vol.8, pp.4, 2014, https://doi.org/10.12989/acc.2019.8.4.321