Advances in concrete construction

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Statistical evaluation of the monotonic models for FRP confined concrete prisms

  • Hosseinpour, Farid (Department of Civil Engineering, The University of Memphis) ;
  • Abdelnaby, Adel E. (Department of Civil Engineering, The University of Memphis)
  • Received : 2015.09.15
  • Accepted : 2015.12.03
  • Published : 2015.09.25
⟨ Previous Next ⟩

Abstract

FRP confining is a widely used method for seismic retrofitting of concrete columns. Several studies investigated the stress-strain behavior of FRP confined concrete prisms with square and rectangular sections both experimentally and analytically. In some studies, the monotonic stress-strain behavior of confined concrete was investigated and compressive strength models were developed. To study the reliability of these models, thorough statistical tests are required. This paper aims to investigate the reliability of the presented models using statistical tests including t-test, wilcoxon rank sum test, wilcoxon signed rank test and sign test with a level of significance of 5%. Wilk Shapiro test was also employed to evaluate the normality of the data distribution. The results were compared for different cross section and confinement types. To see the accuracy of the models when there were no significant differences between the results, the coefficient of confidence was used.

Keywords

References

  1. Abbasnia, R. and Ziaadiny, H. (2010), "Behavior of concrete prisms confined with FRP composites under axial cyclic compression", Eng. Struct., 32, 648-655. https://doi.org/10.1016/j.engstruct.2009.11.011
  2. Abbasnia, R., Hosseinpour, F., Rostamian, M. and Ziaadiny, H. (2012a), "Effect of corner radius on stress-strain behavior of FRP confined prisms under axial cyclic compression", Eng. Struct., 40, 529-535. https://doi.org/10.1016/j.engstruct.2012.03.020
  3. Abbasnia, R., Ahmadi, R. and Ziaadiny, H. (2012b), "Effect of confinement level, aspect ratio and concrete strength on the cyclic stress-strain behavior of FRP-confined concrete prisms", Comp. Part B: Eng., 43(2), 825-831. https://doi.org/10.1016/j.compositesb.2011.11.008
  4. Abbasnia, R., Hosseinpour, F., Rostamian, M. and Ziaadiny, H. (2013), "Cyclic and monotonic behavior of FRP confined concrete rectangular prisms with different aspect ratios", Constr. Build. Mater., 40, 118-125. https://doi.org/10.1016/j.conbuildmat.2012.10.008
  5. Abbasnia, R. and Ziaadiny, H. (2015), "Experimental investigation and strength modeling of CFRP-confined concrete rectangular prisms under axial monotonic compression", Mater. Struct., 1-16.
  6. ACI 440.2R-02. (2002), "Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures", ACI Committee 440, American Concrete Institute, Farmington Hills, Michigan.
  7. ACI 440.2R-08. (2008), "Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures", ACI Committee 440, American Concrete Institute, Farmington Hills, Michigan.
  8. Al-Salloum, Y.A. (2007), "Influence of edge sharpness on the strength of square concrete columns confined with FRP composite laminates", Comp. Part B: Eng., 38(5), 640-650. https://doi.org/10.1016/j.compositesb.2006.06.019
  9. Demers, M. and Neale, K.W. (1994), "Strengthening of concrete columns with unidirectional composite sheets", Proceedings of the Fourth International Conference on Short and Medium Span Bridges, Canadian Society for Civil Engineering, Montreal, Canada, August.
  10. Harajli, M.H., Hantouche, E. and Soudki, K. (2006), "Stress-strain model for fiber-reinforced polymer jacketed concrete columns", ACI Struct. J., 103(5), 672-682
  11. Hosseinpour, F. and Abbasnia, R. (2014), "Experimental investigation of the stress-strain behavior of FRP confined concrete prisms", Adv. Concr. Constr., 2(3), 177-192. https://doi.org/10.12989/acc.2014.2.3.177
  12. Hosseinpour, F. and Abdelnaby, A. (2015), "Statistical investigation of the behavior of FRP confined concrete prisms based on experimental data", Struct. Congress, Portland, USA, April.
  13. Ilki, A. and Kumbasar, N. (2003), "Compressive behaviour of carbon fibre composite jacketed concrete with circular and non-circular cross-sections", J. Earthq. Eng., 7(3), 381-406. https://doi.org/10.1080/13632460309350455
  14. Lam, L. and Teng, J.G. (2003a), "Design-oriented stress-strain model for FRP-confined concrete", Constr. Build. Mater., 17(6), 471-489. https://doi.org/10.1016/S0950-0618(03)00045-X
  15. Lam, L. and Teng, J.G. (2003b), "Design-oriented stress-strain model for FRP-confined concrete in rectangular columns", J. Reinf. Plast. Comp., 22(13), 1149-1186. https://doi.org/10.1177/0731684403035429
  16. Nistico, N. and Monti, G. (2013), "RC square sections confined by FRP: Analytical prediction of peak strength", Comp. Part B: Eng., 45(1), 127-137. https://doi.org/10.1016/j.compositesb.2012.09.041
  17. Nistico, N., Pallini, F., Rousakis, T., Wu, Y.F. and Karabinis, A. (2014), "Peak strength and ultimate strain prediction for FRP confined square and circular concrete sections", Comp. Part B: Eng., 67, 543-554 https://doi.org/10.1016/j.compositesb.2014.07.026
  18. Rochette, P. and Labossiere, P. (2000), "Axial testing of rectangular column models confined with composites", J. Comp. Constr., 4(3), 129-136. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:3(129)
  19. Rousakis, T.C., Karabinis, A.I. and Kiousis, P.D. (2007), "FRP-confined concrete members: Axial compression experiments and plasticity modelling", Eng. Struct., 29(7), 1343-1353. https://doi.org/10.1016/j.engstruct.2006.08.006
  20. Shehata, I.A.E.M., Carneinro, L.A.V. and Shehata L.C.D. (2002), "Strength of short concrete columns confined with CFRP sheets", Mater. Struct., 35(1), 50-58. https://doi.org/10.1007/BF02482090
  21. Skuturna, T. and Valivonis, J. (2015), "The statistical evaluation of design methods of the load-carrying capacity of flexural reinforced concrete elements strengthened with FRP", Arch. Civil Mech. Eng., 15(1), 214-222. https://doi.org/10.1016/j.acme.2014.04.005
  22. Suter, R. and Pinzelli, R. (2001), "Confinement of concrete columns with FRP sheets", Proceedings of Fifth International Conference on fibre reinforced plastics for reinforced concrete structures, Cambridge, U.K, July.
  23. Wang, L.M. and Wu, Y.F. (2008), "Effect of corner radius on the performance of CFRP-confined square concrete columns: Test", Eng. Struct., 30(2), 493-505. https://doi.org/10.1016/j.engstruct.2007.04.016
  24. Wu, G., Wu, Z.S. and Lu, Z.T. (2007), "Design-oriented stress-strain model for concrete prisms confined with FRP composites", Constr. Build. Mater., 21(5), 1107-1121. https://doi.org/10.1016/j.conbuildmat.2005.12.014
  25. Wu, Y.F. and Wang, L.M. (2009), "Unified strength model for square and circular concrete columns confined by external jacket", J. Struct. Eng., 135(3), 253-261. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:3(253)
  26. Wu, Y.F. and Wei Y.Y. (2010), "Effect of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columns", Eng. Struct., 32(1), 32-45. https://doi.org/10.1016/j.engstruct.2009.08.012

Cited by

  1. Shear strengthening of deficient concrete beams with marine grade aluminium alloy plates vol.7, pp.4, 2015, https://doi.org/10.12989/acc.2019.7.4.249
  2. Seismic Reliability Analysis of RC Frames Rehabilitated by Glass Fiber-Reinforced Polymers vol.17, pp.11, 2019, https://doi.org/10.1007/s40999-019-00438-x
  3. Numerical analysis of the seismic performance of RHC-PVCT short columns vol.8, pp.4, 2015, https://doi.org/10.12989/acc.2019.8.4.257
  4. Behaviour of FRP composite columns: Review and analysis of the section forms vol.9, pp.2, 2015, https://doi.org/10.12989/acc.2020.9.2.125
  5. Preload effects on behaviour of FRP confined concrete: Experiment, mechanism and modified model vol.9, pp.6, 2015, https://doi.org/10.12989/acc.2020.9.6.597
  6. Bond strength prediction of the composite rebars in concrete using innovative bio‐inspired models vol.2, pp.11, 2015, https://doi.org/10.1002/eng2.12260