DOI QR코드

DOI QR Code

Physical Properties of Light Weight Foamed Glass Using Waste Glass Powder and Fly Ash

폐유리분말과 플라이애시를 사용한 경량 발포소재의 물리적 특성

  • Song, Hun (Korea Institute of Ceramic Engineering and Technology) ;
  • Shin, Hyeon-Uk (Korea Institute of Ceramic Engineering and Technology)
  • 송훈 (한국세라믹기술원 에너지환경소재본부) ;
  • 신현욱 (한국세라믹기술원 에너지환경소재본부)
  • Received : 2015.12.10
  • Accepted : 2015.12.23
  • Published : 2015.12.30

Abstract

Building insulation materials use for the purpose of energy saving. Insulation materials can be classified inorganic and organic insulation materials. Inorganic insulation is used for fire resistive performance parts and organic insulation is used for thermal performance parts. Meanwhile, organic insulation is due to toxic gas emission in fire. Inorganic insulation is too heavy and low thermal performance than organic materials. This study is focused on evaluation of the physical properties of inorganic foam material using industrial by-products such as waste glass powder and fly ash. From the test result, inorganic foam materials for the applicability of fire-resistance and insulation light-weight materials.

건축용 단열재는 에너지 절약을 목적으로 적용되며 불연 및 내화성능이 요구되는 부위는 무기계 섬유를 주재료로 사용하는 미네랄울 및 글라스울 소재가 적용된다. 하지만 무기계 소재인 미네랄울이나 글라스울은 특성상 수분에 취약하여 뭉침 및 처짐 현상 등이 발생하여 단열효과가 떨어지며 유기계 소재인 폴리스티렌폼이나 우레탄폼 등은 화재에 취약하고 일산화탄소 발생에 의한 가스유해성 등으로 적용에 한계를 갖고 있다. 본 연구에서는 폐유리분말과 플라이애시를 사용하여 가볍고 열전도율이 낮은 무기계 경량 발포소재를 제조하고 물리적 특성을 분석하여 단열용 제품으로서의 가능성을 확인하고자 하였다. 연구결과 폐유리분말과 플라이애시를 사용한 경량 발포소재는 균일한 공극을 형성하며 발포하였고 경량이며 불연재료이므로 불연성능 요구되는 부위에 사용이 가능하다.

Keywords

References

  1. Shin, H.Y., Song, H., Chu, Y.S., Lee, J.K. (2011). A study of fire-resistance light-weight inorganic foam material using cullet and fly-ash, Proceeding of Korea Institute of Building Construction, 11(2), 79-81.
  2. KICET. (2013). Development of Fire Resistant Curtain Wall System.
  3. KICTEP. (2014). Commercialization of Dry and Wet Construction Method of Exterior Insulation Wall System Using Light-weight Nonflammable Ceramic Insulation.
  4. Chu, Y.S., Lee, J.K., Shim, K.B. (2005). Preparation of lightweight aggregate using glass abrasive sludge and effects of pores on the aggregate properties, Korean Journal of Ceramics, 42(1), 37-42 [in Korean]. https://doi.org/10.4191/KCERS.2005.42.1.037