Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

AMDM for free vibration analysis of rotating tapered beams

  • Mao, Qibo (School of Aircraft Engineering, Nanchang HangKong University)
  • Received : 2014.03.30
  • Accepted : 2014.10.28
  • Published : 2015.05.10
⟨ Previous Next ⟩

Abstract

The free vibration of rotating Euler-Bernoulli beams with the thickness and/or width of the cross-section vary linearly along the length is investigated by using the Adomian modified decomposition method (AMDM). Based on the AMDM, the governing differential equation for the rotating tapered beam becomes a recursive algebraic equation. By using the boundary condition equations, the dimensionless natural frequencies and the closed form series solution of the corresponding mode shapes can be easily obtained simultaneously. The computed results for different taper ratios as well as different offset length and rotational speeds are presented in several tables and figures. The accuracy is assured from the convergence and comparison with the previous published results. It is shown that the AMDM provides an accurate and straightforward method of free vibration analysis of rotating tapered beams.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Adomian, G. (1994), Solving frontier problems of physics: The decomposition method, Kluwer-Academic Publishers, Boston.
  2. Banerjee, J.R. (2000), "Free vibration of centrifugally stiffened uniform and tapered beams using the dynamic stiffness method", J. Sound Vib., 233(5), 857-875. https://doi.org/10.1006/jsvi.1999.2855
  3. Banerjee, J.R., Su, H. and Jackson, D.R. (2006), "Free vibration of rotating tapered beams using the dynamic stiffness method", J. Sound Vib., 298, 1034-1054. https://doi.org/10.1016/j.jsv.2006.06.040
  4. Banerjeea, J.R. and Jackson, D.R. (2013), "Free vibration of a rotating tapered Rayleigh beam: A dynamic stiffness method of solution", Comput. Struct., 124, 11-20. https://doi.org/10.1016/j.compstruc.2012.11.010
  5. Bazoune, A. (2007), "Effect of tapering on natural frequencies of rotating beams", Shock Vib., 14, 169-179. https://doi.org/10.1155/2007/865109
  6. Hsu, J.C., Lai, H.Y. and Chen, C.K. (2008), "Free vibration of non-uniform Euler-Bernoulli beams with general elastically end constraints using Adomian modified decomposition method", J. Sound Vib., 318, 965-981. https://doi.org/10.1016/j.jsv.2008.05.010
  7. Mao, Q. (2011), "Free vibration analysis of multiple-stepped beams by using Adomian decomposition method", Math. Comput. Model., 54 (1-2), 756-764. https://doi.org/10.1016/j.mcm.2011.03.019
  8. Mao, Q. (2012), "Free vibration analysis of elastically connected multiple-beams by using the Adomian modified decomposition method", J. Sound Vib., 331, 2532-2542. https://doi.org/10.1016/j.jsv.2012.01.028
  9. Mao, Q. and Pietrzko, S. (2012), "Free vibration analysis of a type of tapered beams by using Adomian decomposition method", Appl. Math. Comput. 219(6), 3264-3271. https://doi.org/10.1016/j.amc.2012.09.069
  10. Mao, Q. (2013), "Application of Adomian modified decomposition method to free vibration analysis of rotating beams", Math. Probl. Eng., Article ID 284720, doi: 10.1155/2013/284720.
  11. Ozdemir, O. and Kaya, M.O. (2006a), "Flapwise bending vibration analysis of a rotating tapered cantilever Bernoulli-Euler beam by differential transform method", J. Sound Vib., 289, 413-420. https://doi.org/10.1016/j.jsv.2005.01.055
  12. Ozdemir, O. and Kaya, M.O. (2006b), "Flapwise bending vibration analysis of double tapered rotating Euler- Bernoulli beam by using the differential transform method", Meccanica, 41, 661-670. https://doi.org/10.1007/s11012-006-9012-z
  13. Rajasekaran, S. (2013), "Differential transformation and differential quadrature methods for centrifugally stiffened axially functionally graded tapered beams", Int. J. Mech. Sci., 74, 15-31. https://doi.org/10.1016/j.ijmecsci.2013.04.004
  14. Rach, R., Adomian, G. and Meyers, R.E. (1992), "A modified decomposition", Comput. Math. Appl., 23, 17-23. https://doi.org/10.1016/0898-1221(92)90076-T
  15. Vinod, K.G., Gopalakrishnan, S. and Ganguli, R. (2007), "Free vibration and wave propagation analysis of uniform and tapered rotating beams using spectrally formulated finite elements", Int. J. Solids Struct., 44(18-19), 5875-5893. https://doi.org/10.1016/j.ijsolstr.2007.02.002
  16. Wang, G. and Wereley, N.M. (2004), "Free vibration analysis of rotating blades with uniform tapers", AIAA J., 42(12), 2429-2437. https://doi.org/10.2514/1.4302

Cited by

  1. Nonlinear vibration analysis of a type of tapered cantilever beams by using an analytical approximate method vol.59, pp.1, 2016, https://doi.org/10.12989/sem.2016.59.1.001
  2. Closed-form solutions for non-uniform axially loaded Rayleigh cantilever beams vol.60, pp.3, 2016, https://doi.org/10.12989/sem.2016.60.3.455
  3. Effects of rotary inertia shear deformation and non-homogeneity on frequencies of beam vol.55, pp.4, 2015, https://doi.org/10.12989/sem.2015.55.4.871
  4. Predicting dynamic response of large amplitude free vibrations of cantilever tapered beams on a nonlinear elastic foundation vol.87, pp.4, 2017, https://doi.org/10.1007/s00419-016-1221-x
  5. Quadratic B-spline finite element method for a rotating non-uniform Rayleigh beam vol.61, pp.6, 2015, https://doi.org/10.12989/sem.2017.61.6.765
  6. Differential transform method and Adomian decomposition method for free vibration analysis of fluid conveying Timoshenko pipeline vol.62, pp.1, 2015, https://doi.org/10.12989/sem.2017.62.1.065
  7. A simplified method for determining the acceleration amplitudes of long-span floor system under walking/running loads vol.75, pp.3, 2015, https://doi.org/10.12989/sem.2020.75.3.377