References
- Jiang, Y., Chang, J., and Lee, C.-H., "An Experimental Study of the Torque-tension Relationship for Bolted Joints," International Journal of Materials and Product Technology, Vol. 16, No. 4, pp. 417-429, 2001. https://doi.org/10.1504/IJMPT.2001.001264
- Yan, Y., Wen, W.-D., Chang, F.-K., and Shyprykevich, P., "Experimental Study on Clamping Effects on the Tensile Strength of Composite Plates with a Boltfilled Hole," Composites Part A: Applied Science and Manufacturing, Vol. 30, No. 10, pp. 1215-1229, 1999. https://doi.org/10.1016/S1359-835X(99)00002-0
- Kim, S. S., Kim, S. Y., and Kim, K. S., "Evaluation of Clamping Forces according to Length-to-diameter Ratios and Preserved Thred Lengths of High Strength Bolts," Journal of Korean Society of Steel Construction, Vol. 12, No. 3, pp. 259-268, 2000.
- Kim, Y. H. and Kim K. S., "Evaluation of Tightening Forces according to Length-diameter Ratios for High Strength Bolts," Journal of the Architectural Institute of Korea, Vol. 15, No. 1, pp. 37-44, 1999.
- Khashaba, U., Sallam, H., Al-Shorbagy, A., and Seif, M., "Effect of Washer Size and Tightening Torque on the Performance of Bolted Joints in Composite Structures," Composite Structures, Vol. 73, No. 3, pp. 310-317, 2006. https://doi.org/10.1016/j.compstruct.2005.02.004
- Han, J. W., Kim, J. H., and Park, Y. S., "Evaluation of Structural Performance and Improvement of Screw Thread Shape on 1,300 MPa High Strength Bolts," Journal of the Korean Society of Civil Engineering, Vol. 31, No. 3A, pp. 189-198, 2011.
- Hwang, H.-Y., "Bolted Joint Torque Setting using Numerical Simulation and Experiments," Journal of Mechanical Science and Technology, Vol. 27, No. 5, pp. 1361-1371, 2013. https://doi.org/10.1007/s12206-013-0317-2
- Min, K. B., Kim, J.-B., Park, K., and Ra, S. W., "Evaluation of Clamping Characteristics for Subminiature Screws according to Thread Angle Variation," J. Korean Soc. Precis. Eng., Vol. 31, No. 9 pp. 839-846, 2014. https://doi.org/10.7736/KSPE.2014.31.9.839
- Lee, H.-K., Park, K., Ra, S.-W., and Kim, J.-B., "Prediction of Joining Torque for Bit Depth of Subminiature Bolt," Transactions of the Korean Society of Mechanical Engineers A, Vol. 38, No. 8, pp. 917-923, 2014. https://doi.org/10.3795/KSME-A.2014.38.8.917
- Bhattacharya, A., Sen, A., and Das, S., "An Investigation on the Anti-loosening Characteristics of Threaded Fasteners under Vibratory Conditions," Mechanism and Machine Theory, Vol. 45, No. 8, pp. 1215-1225, 2010. https://doi.org/10.1016/j.mechmachtheory.2008.08.004
- Pai, N. and Hess, D., "Three-dimensional Finite Element Analysis of Threaded Fastener Loosening due to Dynamic Shear Load," Engineering Failure Analysis, Vol. 9, No. 4, pp. 383-402, 2002. https://doi.org/10.1016/S1350-6307(01)00024-3
- Kim, K. K., "A Study for Structural Characteristics of Tower Flange Connection under the Bolt Pretension in Offshore Wind Turbine System," M.Sc. Thesis, Department of Naval Architecture and Marine Engineering, Mokpo National University, 2011.
- ABAQUS, "ABAQUS Manual, Version 6.12, Dassault Systems," 2012.
Cited by
- Loosening analysis for fastening screw of automotive door trim parts vol.17, pp.4, 2016, https://doi.org/10.1007/s12239-016-0066-1