Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Design and Operation of 3D Printing Education Curriculum in Mechanical Engineering

기계공학 교과과정에서 3D 프린팅 교육의 설계와 운영

  • Lee, In Hwan (School of Mechanical Engineering, Chungbuk National University) ;
  • Shin, Jung Min (Department of Education, Ewha Womans University) ;
  • Cho, Hae-Yong (School of Mechanical Engineering, Chungbuk National University)
  • Received : 2015.06.11
  • Accepted : 2015.06.17
  • Published : 2015.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Many 3D printing technologies are being used in various industries, and their demands for well-educated engineers are increasing. Moreover, novel technologies are being developed to overcome the limits of existing 3D printing technologies. In this regard, adequate education and a related curriculum especially in the Mechanical Engineering field, which is the basis of the industry, is essential. In this paper, the development of the 3D printing curriculum and its assessment in Mechanical Engineering education are proposed. The education program consisted of lectures and practice. It consisted of major 3D printing technologies, such as SLA, FDM, SLS, LOM, and Polyjet. Moreover, post-processing, room temperature vulcanizing (RTV), and coloring were also taught. The effectiveness of the proposed education program was assessed by the questionnaire survey, and the results were analyzed. Areas of improvement were deduced from the survey results.

Keywords

References

  1. Chua, C. K., Leong, K. F., and Lim, C. S., "Rapid Prototyping - Principles and Applications," 3-rd Edition, World Scientific Publishing, pp.7-8, 2010.
  2. Groover, M. P., "Introduction to Manufacturing Process," Korean Translation Edition, Hantee Media, pp.752-760, 2012.
  3. Ko, H. J., Kim, H. C, Yoon, H. R., and Lee, I. H, "Prototyping for MID Cruise Control Switch," Proceeding of the KSMPE Spring Conference, pp.108, 2013.
  4. Woo, S. G, Lee, I. H, Kim, H. C., Lee, K. C., and Cho, H. Y, "Development of a Photopolymer-based Flexible Tactile Sensor using Layered Fabrication and Direct Writing," Journal of the Korean Society of Manufacturing Process Engineers, Vol.13 No.2, pp.8-14, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.008
  5. Wohlers, T. T., "Wohlers Report 2013: Additive Manufacturing and 3D Printing State of the Industry: Annual Worldwide Progress Report," 2013.
  6. Park, K., "Applications of 3D CAD and 3D Printing in Engineering Design Education," Journal of Korean Precision Engineering, Vol.31, No.12, pp.1085-1091, 2014. https://doi.org/10.7736/KSPE.2014.31.12.1085
  7. Pearce, J. M., Blair, C. M., Laciak, K. J., Andrews, R., Nosrat, A., and Zelenika-Zovko, I., "3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development," Journal of Sustainable Development, Vol.3, No.4, pp.17-29, 2010.
  8. Park, K. and Lee, H. J., "Applications of 3D printing in CAD Course for Mechanical Engineers," Proc. Soc. CAD/CAM Conf., pp. 838-843, 2014.
  9. Lee, H. W., Kim, S. H., Park, K., and Kim, J. Y.,"Experience of Senior Capstone Design Course of School of Mechanical Design and Automation Engineering at Seoul National University of Technology," Proc. ASME Asia-Pacific Eng. Education Congress, 2009.
  10. Park, K. and Lee, H. J., "Applications of 3D Printing in Engineering Design Education," Proc. Global 3D Tech. Forum Conf., pp. 48-49, 2013.
  11. Choi, S. G., Designers for Rapid Prototyping User Guide, Hyejiwon, pp.92-96, 2010.
  12. Kim, S. Y., "Research on the College Students' Recognition about Learning Outcomes with Effective Instructional Methods," Journal of Lifelong Learning Society, Vol.10, No.11, pp.59-82, 2014. https://doi.org/10.26857/JLLS.2014.02.10.1.59
  13. Kim, M. J., "Peer assessment as a learning method : The effects of assessor and assessee's roles on metacognition, performance, and motivation," Journal of Educational Technology, Vol.21 No.4, pp.1-28, 2005.

Cited by

  1. 3D 프린팅 구조물을 이용한 자기주도 학습방법이 방사선학과 학생들에 미치는 교육 효과 vol.14, pp.1, 2015, https://doi.org/10.7742/jksr.2019.14.1.45
  2. A Study on the Development of 3D Printing Instructional Materials for Specialized High School based on Creativity Education vol.21, pp.5, 2015, https://doi.org/10.9728/dcs.2020.21.5.875
  3. A Short Review of Appropriate Technology and Engineering Design Education for Underdeveloped Countries vol.19, pp.7, 2020, https://doi.org/10.14775/ksmpe.2020.19.07.112