DOI QR코드

DOI QR Code

Corrosion Properties of Carbon-Coated Metallic Bipolar Plate for PEMFC

고분자 전해질 연료전지 금속 분리판 적용을 위한 탄소 박막의 증착과 내식성 평가

  • Jang, Dong-Su (Department of Materials Science and Engineering, Seoul National University) ;
  • Lee, Jung-Joong (Department of Materials Science and Engineering, Seoul National University)
  • Received : 2015.06.16
  • Accepted : 2015.06.24
  • Published : 2015.06.30

Abstract

Carbon thin films were deposited on STS 316L sheets by inductively coupled plasma enhanced magnetron sputtering with or without substrate bias voltage. Typical Raman spectrum for amorphous diamond-like carbon (DLC) was obtained, and the interfacial contact resistance (ICR) was measured to show its conductive nature. The electrochemical impedance spectroscopy (EIS) was used to investigate the corrosion mechanism of the carbon coating under the polymer electrolyte membrane fuel cell (PEMFC) condition. According to the pore-corrosion mechanism, the electrolyte penetrates the carbon coating through the pores and reacts with the substrate. As the substrate corrosion proceeds, the pore enlargement occurs and the surface area of the substrate exposed to the electrolyte. Applicability of the carbon coating for the PEMFC bipolar plate was evaluated by potentiodynamic polarization experiments. Finally, an adhesion problem was briefly considered.

Keywords

References

  1. R. A. Antunes, M. C. L. Oliveira, G. Ett, V. Ett, Int. J. Hydrogen Energy 35 (2010) 3632. https://doi.org/10.1016/j.ijhydene.2010.01.059
  2. W. Hong, D. H. Han, H. Choi, M. W. Kim, J. J. Lee, Int. J. Hydrogen Energy 36 (2011) 2207. https://doi.org/10.1016/j.ijhydene.2010.11.077
  3. K. Feng, T. Hu, X. Cai, Z. Li, P. K. Chu, J. Power Sources 199 (2012) 207. https://doi.org/10.1016/j.jpowsour.2011.09.095
  4. W. Yoon, X. Huang, P. Fazzino, K. L. Reifsnider, M. A. Akkaoui : J. Power Sources 179 (2008) 265. https://doi.org/10.1016/j.jpowsour.2007.12.034
  5. H. S. Choi, D. H. Han, W. H. Hong, J. J. Lee, J. Power Sources 189 (2009) 966. https://doi.org/10.1016/j.jpowsour.2008.12.060
  6. N. D. Nam, M. J. Kim, D. S. Jo, J. G. Kim, and D. H. Yoon : Thin Solid Films 545 (2013) 380. https://doi.org/10.1016/j.tsf.2013.07.056
  7. L. Wang, D. O. Northwood, X. Nie, J. Housden, E. Spain, A. Leyland, and A. Matthews : J. Power Sources 195 (2010) 3814. https://doi.org/10.1016/j.jpowsour.2009.12.127
  8. S. Y. Kim, D. H. Han, J. N. Kim, J. J. Lee, J. Power Sources 193 (2009) 570. https://doi.org/10.1016/j.jpowsour.2009.03.076
  9. D. P. Davies, P. L. Adcock, M. Turpin, S. J. Rowen, J. Appl. Electrochem. 30 (2000) 101. https://doi.org/10.1023/A:1003831406406
  10. H. Wang, M. A. Sweikart, J. A. Turner, J. Power Sources 115 (2003) 243. https://doi.org/10.1016/S0378-7753(03)00023-5
  11. I. D. Raistrick, D. R. Franceschetti, J. Ross Macdonald, Impedance spectroscopy : Theory, Experiment, and Applications, 2nd, Barsoukov E, J. Ross Macdonald (Ed.), John Wiley & Sons, Canada (2005) 90.
  12. S. C. Seo, D. C. Ingram, H. H. Richardson, J. Vac. Sci. Technol. A 13 (1995) 2856. https://doi.org/10.1116/1.579604
  13. A. Kumar, M. Ricketts, S. Hirano, J. Power Sources 195 (2010) 1401. https://doi.org/10.1016/j.jpowsour.2009.09.022
  14. V. V. Strelko, N. T. Kartel, I. N. Dukhno, V. S. Kuts, R. B. Clarkson, B. M. Odintsov, Surf. Sci. 548 (2004) 281. https://doi.org/10.1016/j.susc.2003.11.012
  15. J. Y. Chen, G. P. Yu, J. H. Huang, Mater. Chem. Phys. 65 (2000) 310. https://doi.org/10.1016/S0254-0584(00)00255-8

Cited by

  1. Evaluation of Electrochemical Characteristics on Graphene Coated Austenitic and Martensitic Stainless Steels for Metallic Bipolar Plates in PEMFC Fabricated with Hydrazine Reduction Methods vol.15, pp.2, 2016, https://doi.org/10.14773/cst.2016.15.2.92