Korean Journal of Construction Engineering and Management (한국건설관리학회논문집)

Korea Institute of Construction Engineering and Management (한국건설관리학회)
권호 표지
DOI QR코드

DOI QR Code

A Development of Framework for Selecting Labor Attendance Management System Considering Condition of Construction Site

건설 현장 특성을 고려한 출역관리시스템 선정 프레임워크 개발

  • Kim, Seong-Ah (Department of Architectural and Civil Engineering, Sungkyunkwan University) ;
  • Chin, Sang-Yoon (Department of Construction Engineering, Sungkyunkwan University) ;
  • Jang, Moon-Seok (Department of Convergence Engineering for Future City, Sungkyunkwan University) ;
  • Jung, Choong-Won (Department of Convergence Engineering for Future City, Sungkyunkwan University) ;
  • Choi, Cheol-Ho (DoallTech Co., Ltd.)
  • Received : 2015.04.23
  • Accepted : 2015.05.27
  • Published : 2015.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

Labor attendance management has traditionally been carried out by writing a table for checking an attendance of labor, which requires a lot of time and effort. As electronic devices with additions such as barcodes, Quick Response codes, and Radio Frequency Identification(RFID) have been developed, however, automated labor attendance management systems have appeared. Recently, various types of labor recognition devices converged with biometrics (fingerprint, vein, face recognition, etc.) have been released. However, although these devices can be used to check attendance automatically, there is insufficient guidance when it comes to selecting the appropriate labor attendance management system for construction sites. Therefore, this study proposed a decision framework to determine which labor attendance management system would be suitable for a construction site and to select the labor recognition device. This study investigated different labor recognition devices, focusing on how they worked, and tested the performance of devices and their usability for construction labor attendance management. The test results showed that RFID is most suitable when verifying the attendance of many laborers over a short period of time. The devices for hand vein and fingerprint recognition did not function when there was a foreign material such as cement or paint on the laborer's hand, except for a deformed finger. Reflecting these test results, this study suggested a framework for selecting a labor attendance system and recognition device; this is expected to contribute to the development of more efficient labor management systems.

출역관리는 전통적으로 출역점검표 작성에 의해 수작업으로 진행되기 때문에 많은 노력과 시간을 요구했다. Bar Code, QR code, RFID와 같은 전자장치들이 발달하면서 자동화된 출역관리시스템이 출현하였고, 최근에는 지문, 정맥인식과 같은 생체인식과 융합된 다양한 유형의 출역관리시스템이 등장하고 있다. 출석체크를 위해 사용되는 다양한 인식 장비들의 출연에도 불구하고, 건설현장 마다 적합한 출역관리시스템을 선정하기 위한 체계적인 기준이 부족한 실정이다. 따라서 본 연구는 출역관리에 사용되는 다양한 인식 장비를 건설 현장에 적합한 시스템을 선정하기 위한 체계적인 의사결정 프레임워크를 제시하는 것이 목적이다. 본 연구는 건설현장에서의 사용성을 테스트하기 위해 인식장비 마다 특징들을 살펴보고, 기존 문헌 및 전문가 인터뷰를 수행하였다. 테스트 결과, 가장 빠른 시간 내에 많은 인원의 출석을 확인하는 것에는 RFID가 적합한 것으로 나타났다. 그리고 손혈관과 지문의 경우, 손가락 변형과 상관없이 페인트, 시멘트와 같은 오염물질이 많이 묻어있는 경우 인식이 되지 않는 것으로 나타났다. 이러한 테스트 결과를 반영하여 본 연구는 출역관리시스템 선정을 위한 모델을 제시하였으며, 보다 효율적인 출역관리시스템 구축에 기여할 것으로 기대한다.

Keywords

References

  1. Ahn, C. S., Yoon, S. Y. and Chin, S, Y. (2012)."Diligence and Indolence Management System for Specialty Contractor on Construction Site-Using GPS of Smart Phone.", Korean journal of construction engineering and management, KICEM, 13(3), pp. 56-66. https://doi.org/10.6106/KJCEM.2012.13.3.056
  2. An, S. H., Kim, J. H. and Park, S. G. (2011). "A Study on Recognition of Construction Material Management with Smart Phone and RFID.", Proceeding of Architectural Institute of Korea, 31(2), pp. 393-394.
  3. Burjkhalifa (2015).
  4. Choi, Chul-Ho (2004). "A case study and future directions of Radio Frequence Identification system", Proceeding of Annual Conference of the Construction Engineering and Managemant Institute of Korea, 5, pp. 145-152.
  5. Choi, Eunsoo, Christian Wallraven and Lee, Seong-Whan (2011). "Illumination Invariant Face Recognition Inspired by Human Perception." Korea Institute of Information Scientists and Engineers, 38(2B), pp. 407-410.
  6. Choi, Hee-Seong, Lee, Sung-Ju and Kim, Jae-Hee (2006). "Status and Prospect of counterfeit biological detection technology", Magazine of the IEEK, 33(1), pp. 64-73.
  7. Choi, Jeong-Wha, and Park, Joon-Hee (2009). "The Effect of Immersion in Hot and Cold Water on Hemodynamic and Thermoregulatory Responses.", 16(2) The Society of Living Environment System, korea, pp. 172-185.
  8. Choi, Y. G., Yoon S. W. and Chin, S.Y. (2011). Integrated Manpower Information Systems on Construction Site, Korean Journal of Construction Engineering and Management, KICEM, 12(4), pp. 106-116. https://doi.org/10.6106/KJCEM.2011.12.4.106
  9. Go, Seong-Seok, Song, Do-Heom and Jang, Yun-Ra (2013). "A Study on the Intensive Safety Management Items of Small-Sized Construction Sites", Journal of Korea Institute of Industrial Safety, 28(5), pp. 27-34.
  10. Ha, Young-Ho (2002). Study on IT-based construction labor management system development, In-ha University, Master's Degree.
  11. Jang, Sung-ho et al. (2004). "Sliding Active Camerabased Face Pose Compensation for Enhanced Face Recognition." Journal of the institute of electronics engineers of Korea, 41(6), pp. 155-164.
  12. Jeong, Yeon-seong (2006). Implementation of Vein Recognition System Using Skeleton Pattern Tracking Method Applied to Subcutaneous Vascular Network of Back Hand, Kang-won University.
  13. Kim, B. S., Kang, Y. M., Kim, M. J., Park, J. M., Kim, O. K. and Choi, B. J. (2011). "Labor management Process of a construction site using Smart Phone", The Regional Association of Architectural Institute of Korea, pp. 357-360.
  14. Kim, Guk-Bae (2013). Problems and improvements on the domestic electronic bidding system, Jung-ang University.
  15. Kim, Tae-Gyum, and Park, Chan-Sik (2004). "A Scheme for Improving Site Labor Management using Information Management Technology." Proceeding of Annual Conference of the Architectural Institute of Korea, 24(1), pp. 491-494.
  16. Kim, Y. B., Song, J. H., Yoon S. W., Chin S. Y., Kwon, S. W. and Kim, Y. S. (2008). "Reading Performance Test of RFID Technology for Curtain Wall Material", Korean Journal of Construction Engineering and Management, KICEM, 9(1), pp. 176-187.
  17. Lee, K. P., Lee, H. S, Park, M. S. and Kim, E. J. (2011 ). "Construction Material Management Using Smart Mobile Computing", Korean Journal of Construction Engineering and Management, KICEM, 12(4), pp 59-70. https://doi.org/10.6106/KJCEM.2011.12.4.59
  18. Lu, W., Huang, G. Q. and Li, H. (2011). "Scenarios for applying RFID technology in construction project management.", Automation in Construction, 20(2), pp. 101-106. https://doi.org/10.1016/j.autcon.2010.09.007
  19. Ministry of Information and Communication (MIC) (2005). Guideline for Performance Management of Information System, 2005-12.
  20. Mun, Hyeon-jun (2008). "Face Recognition: A Survey." Human Computer Interaction KOREA, 2, pp. 1683-1688.
  21. Navon, R. and Goldschmidt, E. (2002). "Monitoring labor inputs Automated-data-collection model and enabling technologies.", Automation in Construction, 12(2), pp. 185-199. https://doi.org/10.1016/S0926-5805(02)00043-2
  22. Park, C. W. and Yun, S. H. (2008). "The Problem and Solution Plan of the Labor Management Which Uses RFID.", Proceeding of the Regional Association of Architectural Institute of Korea, pp. 459-463.
  23. Park, Won-Geun (2013). RFID and USN Industry Trends in 2012, Korea Association of RFID/USN Convergence.
  24. Qin Bin Pan Jian-fei Cao Guang-zhong, and Du Geguo (2009). "The Anti-spoofing Study of Vein Identification System." Computational Intelligence and Security, 2009(2), pp. 357-360.
  25. Security WorldMag (2009). Domestic security market forecast report, 147.
  26. Won, K. S. (2005). manpower management model of finish work for increasing productivity in high-rise housing construction sites, Hanyang University, Mater's Degree.
  27. Yeom, Jiung (2009). Development of Construction Site Access Management Automation System based on Hand Vascular Pattern, Hanyang University.
  28. Yoon, Su-Won and Chin, Sang-Yoon (2011). "An RFID and BIM based Simulator for Construction Material Logistics and Progress Management.", Korean Journal of Construction Engineering and Management, KICEM, 12(5), pp. 46-55. https://doi.org/10.6106/KJCEM.2011.12.5.46
  29. Yoon, Su-Won, Kim, Hak-Chul and Choi, Jong- Moon (2012). "An Improvement on Process of Labor Wages Unpaid and Safety Tasks Confirmation using RFID based Labor Management equipment", Annual Conference of the Construction Engineering and Managemant Institute of Korea, 2012, pp. 337-339
  30. Yu, H. C., Kim, C. R., Lee, J. S., Lee, Y. S., Kim, J. H. and Kim, J. J (2008). "Analyzing Impact Factors for Improving the use of RFID in Construction Site.", Proceeding of Annual Conference of the Architectural Institute of Korea, 24(12), pp. 151-158.
  31. Yuhang Ding, Dayan Zhuang and Kejun Wang (2005). "A Study of Hand Vein Recognition Method." Institute of Electrical and Electronics Engineers, 4, pp. 2106-2110.

Cited by

  1. What Authentication Technology Should Be Chosen for Construction Manpower Management? vol.196, 2017, https://doi.org/10.1016/j.proeng.2017.07.204