Journal of Korean Association for Spatial Structures (한국공간구조학회논문집)

Korean Association for Spatial Structures (한국공간구조학회)
권호 표지
DOI QR코드

DOI QR Code

Buckling Load of Single-layered Lattice Roof Structure Considering Asymmetric Snow Load

비대칭 적설하중 적용을 통한 단층 래티스 지붕 구조물의 좌굴하중 특성

  • 황경주 (서울시립대학교 건축학부) ;
  • 이승재 (한국기술교육대학교 건축공학부) ;
  • 손수덕 (한국기술교육대학교 건축공학부)
  • Received : 2015.08.21
  • Accepted : 2015.09.05
  • Published : 2015.09.15
Download PDF
⟨ Previous Next ⟩

Abstract

A single-layerd steel lattice roof, which has 50m span, was constructed. In order to figure out the realistic buckling load level, the structural analysis of this roof structure was performed especially by local snow load. Due to the characteristics of application of snow load, the load combinations of snow should be considered not only global area but also local part so that the critical buckling load could be observed as easy as possible. Geometrical imperfection was simulated to consider inaccurate shape of structure. And then nonlinear analysis were performed. Finally, this paper could investigate that the local snow load with geometrical imperfection decreased the level of buckling load significantly.

Keywords

References

  1. Bulenda Th and Knippers J(2001), Stability of grid shells, Computers and Structures, Vol 79, 1161-1174 https://doi.org/10.1016/S0045-7949(01)00011-6
  2. Kato S, Yamashita T, Nakazawa S, Kim Y and Fujibayashi A(2007), Analysis based evaluation for buckling loads of two-way elliptic paraboloidal single layer lattice domes, Journal of Constructional Steel Research, Vol 63, 1219-1227 https://doi.org/10.1016/j.jcsr.2006.11.014
  3. Hwang KJ and Knippers J(2010), Stability of single layered grid shells with various connectors, Proceeding of the ICSA 2010 Guimaraes, Portugal, 581-588
  4. Steinboeck A, Jia X, Hoefinger G and Mang HA(2008), Conditions for symmetric, antisymmetric, and zero-stiffness bifurcation in view of imperfection sensitivity and insensitivity, Computer methods in applied mechanics and engineering, Vol 197, 3623-2626 https://doi.org/10.1016/j.cma.2008.02.016
  5. Shon SD, Kin SD, Lee SJ and Kim JS (2011.3) A study on the critical point and bifurcation according to load mode of dome-typed space frame structures, Journal of Korean Association for Spatial Structures, 11(1) 121-130 https://doi.org/10.9712/KASS.2011.11.1.121
  6. Lee SJ and Shon SD (2012.6) Characteristics of buckling load and bifurcation in accordance with rise-span ratio of space truss considering initial imperfection, Journal of Koran Society of Steel Construction, 24(3) 337-348 https://doi.org/10.7781/kjoss.2012.24.3.337
  7. Shon SD and Lee SJ (2013.3) Critical load and effective buckling length factor of dome-typed space frame accordance with variation of member rigidity, Journal of Korean Association for Spatial Structures, 13(1) 87-96 https://doi.org/10.9712/KASS.2013.13.1.087
  8. Steinboeck A, Jia X, Hoefinger G and Mang HA(2008), Conditions for symmetric, antisymmetric, and zero-stiffness bifurcation in view of imperfection sensitivity and insensitivity, Computer methods in applied mechanics and engineering, Vol. 197, 3623-2626 https://doi.org/10.1016/j.cma.2008.02.016
  9. Shon SD, Lee SJ and Choi JH(2012), Optimum structural design of space truss with considering in snap-thrugh buckling, Journal of Korean Association for Spatial Structures, Vol. 12(2), 89-98 https://doi.org/10.9712/KASS.2012.12.2.089
  10. Shon SD, Hwang KJ and Lee SJ(2014), Numerical evolution of buckling behavior in space structures considering geometrical parameters with joint rigidity, Journal of Central South University, Vol. 21(3), 1115-1124 https://doi.org/10.1007/s11771-014-2044-y

Cited by

  1. The Dynamic Buckling and Critical Load of the Spatial Truss under the Beating-wave Load vol.32, pp.7, 2016, https://doi.org/10.5659/JAIK_SC.2016.32.7.23