Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of the Diode Laser Heat Treatment Robot System Based on OLP Simulator

OLP 시뮬레이터 기반의 다이오드 레이저 열처리 로봇시스템 개발

  • Park, Kee-Jin (Daegu Mechatronics & Materials Institute, Machinery & Robot Research Division) ;
  • Yoon, Sung-Ho (School of Mechanical Engineering, Kumoh national Institute of Technology)
  • 박기진 (대구기계부품연구원 기계로봇연구본부) ;
  • 윤성호 (금오공과대학교 기계공학과)
  • Received : 2015.10.10
  • Accepted : 2015.10.21
  • Published : 2015.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Heat treatment for car body molds is mainly a manual process performed by a worker. The performance of this process is affected by workers' skill level, and has limitation in maintaining uniform product quality. In this study, we developed a diode laser heat treatment robot system that implements an OLP type simulator to overcome the limitation of manual process, and to improve and stabilize the quality level. In addition, we verified the efficiency of the robot system and mechanism stability from the early stage through design verification and simulated analysis in the development stage. In addition, we carried out a field test to study the way to establish optimized D/B for diode laser heat treatment criteria for car body molds, such as heat treatment speed, interval, etc. via site experiment.

Keywords

References

  1. Park, K. J., Son, J. H., Cho, C. S., Kim, B. S. et al., "Development of the Heat Treatment Automation System for the Car-Body Mold," SAE Technical Paper 2013-01-0008, 2013.
  2. Eydgahi A. M. and Sheehan J. J.. "A Computer Animation of Robotic Manipulators and Workcells". IEEE Control System. pp55-59. 1991.
  3. Baillieul, J, "Kinematic Programming Alternatives for Redundant Manipulators", IEEE International Conference on Robotics and Automation, Vol. 2, pp. 722-728, 1985.
  4. D.C. Lee, K.Y. Rhee and Y.N. Park, "Analysis on the characteristics of STS5 by a High Frequency Induction Heater", Proceeding of KSPE spring Conference, pp. 239-240, 2006.
  5. Park Kee-Jin, Kim Yong-Sik and Yoon Sung-ho, "A study on the car-body mold heat treatment automation process based on the robot OLP simulation", Proceeding International journal of Manufacturing Technology Engineers 2013.
  6. Mooring Benjamin W., Roth Zvi S., and Driels Morris R., "Fundamentals of Manipulator Calibration" John Wiley & Sons, New York, 1991.
  7. Schroer Klalus, Albright Stephen L., and Lisounkin Alexis, "Modeling Closed loop Mechanics in Robots for Purposes of Calibration", IEEE Journal of Robotics and Automation. Vol.13, No.2, pp218-229. April, 1997. https://doi.org/10.1109/70.563644
  8. K.J. Park, Y.S. Kim and S.H. Yoon, "Development of the diode laser heat treatment robot system based on OLP simulator", Proceeding of KSMPE spring Conference, pp. 8, 2015.