Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical Analysis of the Kitchen Hood Ventilation System for Marine Environment

선박용 주방후드 환기시스템에 관한 수치해석

  • Yi, Chung-Seob (Industry-Academic corporation foundation, Gyeognam National University of Science and Technology)
  • 이중섭 (경남과학기술대학교 산학협력단)
  • Received : 2015.07.05
  • Accepted : 2015.08.03
  • Published : 2015.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study regards distributions of flow in the ventilation system used in the kitchen hood in a ship. In this study, for describing the flow in the ventilation system, three-dimensional steady-state turbulence was assumed for the governing equation. When the plume was formed, three gases, CO, CO2, and HCL, in the flow field of the hood were considered as the plume, and it was assumed that the sum of concentrations of the gases was 100%. As a result, it could be confirmed that the plume was smoothly discharged when the flow rate of the supply was ten times lower than that of the exhaust.

Keywords

References

  1. Koo. N. Y., Lee. Y. K. and Young. Y. S., "An experimental study on the air curtain range hood interrupting the diffusion of polluted air," SAREK Winter Annual Conference, pp. 382-387, 2002.
  2. Park. J. C., "A Study on the Improvement Strategies for Exhaust Performance in Commercial Kitchen Hoods," Korean J. Air-Cond. Refrig. Eng., Vol. 15, No. 5, pp. 439-445, 2003.
  3. Yi, K. W., Kim, Y. I. and Moon. Y. J., "A Study on the Performance of Capture Air Ventilation System with respect to Air Flow Rate," SAREK Winter Annual Conference, pp. 477-482, 2003.
  4. Lim. K. B., Lee. K. S. and Lee. C. H., "A Numerical Study on the Characteristics of Flow Field, Temperature and Concentration Distribution According to Changing the Shape of Separation Plate of Kitchen Hood System," Trans. Korean Soc. Mech. Eng. A, Vol. 30, No. 2, pp. 177-185, 2006. https://doi.org/10.3795/KSME-B.2006.30.2.177
  5. Kim. S. G., Park. S. G., Choi. H. G., Young. H. T. and Kim D. Y., "Study on the Optimal Velocity of Horizontal Air Jet of a Range hood system," SAREK Winter Annual Conference, pp. 477-482, 2005.
  6. Jang. S. C, Kim J. W. Yi. C. S., "Numerical Analysis on the Inner Flow Characteristic for Small Smoke Collector," J. of KSMPE, Vol. 12, No. 5, pp. 67-75, 2013.

Cited by

  1. Numerical Analysis on the Thermal and Fluid in Air Conditioning Duct for Marine Offshore vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.023
  2. 환기시스템용 4000CMM급 송풍기 개발에 관한 연구 vol.16, pp.1, 2015, https://doi.org/10.14775/ksmpe.2016.16.1.017
  3. 선박용 환기구 루버 개발을 위한 수치해석 vol.16, pp.1, 2015, https://doi.org/10.14775/ksmpe.2016.16.1.030
  4. 해양 시추선용 공조덕트 개발에 대한 수치해석 vol.16, pp.2, 2015, https://doi.org/10.14775/ksmpe.2017.16.2.050
  5. A Study on the Flow Analysis of Ventilation Louver for Polar Ship vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.016
  6. Numerical Analysis on the Thermal and Fluid in Air Conditioning Duct for Marine Offshore vol.18, pp.2, 2015, https://doi.org/10.14775/ksmpe.2019.18.2.007
  7. 해양 구조물용 공조덕트 유동 및 구조해석에 관한 연구 vol.18, pp.3, 2019, https://doi.org/10.14775/ksmpe.2019.18.3.088
  8. Flow Analysis of Air Cleaner and Resonator by Shape vol.18, pp.9, 2015, https://doi.org/10.14775/ksmpe.2019.18.9.023
  9. Flow Analysis due to the Angle of the Front Wing on an Airplane vol.18, pp.12, 2015, https://doi.org/10.14775/ksmpe.2019.18.12.022
  10. 아연도금 부스 환기시스템 개선에 관한 수치해석 vol.24, pp.1, 2015, https://doi.org/10.21289/ksic.2021.24.1.45