Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Characterizations of Luminance for Varied LED Based Surface Lighting Designs

LED 면광원에서 패키지 수량에 따른 휘도변화 특성

  • Received : 2015.12.10
  • Accepted : 2016.10.03
  • Published : 2016.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

Commercialization of surface lighting using Light Emitting Diodes (LED) has embraced the advance to Organic Light Emitting Diode (OLED) technology. This is necessary to achieve light-efficiency-improvement and longer component life. The range of application of LED lighting for both interior and outdoor lights has been gradually expanding. Automobiles and home appliances are now included. In the case of LED surface lighting in a domestic refrigerator, achieving high efficiency requires optimization of the number of LEDs in a pack. Optimization is also required in the design stage of development with regard to the conversion of the light source type from point light sources to the surface light type. This paper addresses these design problems. It presents a study of brightness variations for design solutions that differ from the existing technology in both the number of LED packages and use of Light Gathering Power (LGP) information. The intention is to facilitate production of high brightness LED surface lighting for domestic refrigerators.

Keywords

References

  1. Lee, T. H., Choi, S. D., Hwang, J. M., "Study on optical characteristic by formed direction of lenticular pattern in LED Flat Lighting", Proceedings of the KSMPE Annual Autumn Conference, p 151, 2015.
  2. Lee, T. H., Choi, S. D., Kim, Y. H., "Influences of Brightness Variations in Surface Light Source by LED", Proceedings of the KSMPE Annual Autumn Conference, p 144, 2014.
  3. Yu, B. G., Lee, J. I., Chu, H. Y., "Trends of OLED Lighting Technology for Future Lighting", Electronics and Telecommunication Trends, Vol.26, No.6, pp. 190-198, 2011.
  4. Lee, J. S., Kim, S. Y., Choi, J. M., Kim, B. S., "Analysis of Illuminance and Energy Efficiency when Applying LED Lighting in Apartment Houses", Journal of the Architectural Institute of Korea, Vol. 27, No. 4, pp. 25-32, 2011.
  5. Oh, S.W., Kim, N., Kim, E. S., Ahn, J. W., "Optimization of the Dual-layer LGP for Improving Luminance and Uniformity of Edge Type Back Light Unit", Korean Journal of Optics and Photonics, Vol. 21, No 6, pp. 247-253, 2010. https://doi.org/10.3807/KJOP.2010.21.6.247
  6. Lim, S. K., "Flat Lighting using 32" Flat Fluorescent Lamp", Journal of the Semiconductor & Display Technology, Vol. 9, No. 1, pp.61-66, 2010.
  7. Choi, H. J., Je, T. J., Jeon, E. C., "Machining Technology of Aspherical Lens Core Mold for Large Area Light Guide Plate and Evaluation of Optical Property", Proceedings of the KSMPE Annual Spring Conference, p 73, 2015.
  8. Park, J. S., Jeon, E. C., Ha, D. S., "Horizontal centrifugal casting process optimization using CAE", Proceedings of the KSMPE Annual Autumn Conference, p 94, 2014.11
  9. Lee, S. H., Moon, H. J., Hue, S. B., Choi, S. D., "Development of LED Module Control-based PWM Current for Control of Heat-dissipation", Journal of the Korean Society of Manufacturing Process Engineers, Vol.14 No.6, pp.129-135, 2015 https://doi.org/10.14775/ksmpe.2015.14.6.129
  10. Hwang, J. D., Ko, D. S., "Development of a High Efficient LED System for the Plant Growth", Journal of the Korean Society of Manufacturing Process Engineers, Vol.13 No.4, pp.121-129, 2014.

Cited by

  1. 30W급 LED 투광등 히트싱크 높이변화에 따른 온도분포에 관한 실험적 연구 vol.16, pp.5, 2016, https://doi.org/10.14775/ksmpe.2017.16.5.150
  2. 30W급 LED 투광등의 풍속에 따른 히트싱크 온도분포에 관한 실험적 연구 vol.18, pp.5, 2016, https://doi.org/10.14775/ksmpe.2019.18.5.096
  3. Pattern optimization in a light guide plate and positioning of light sources for improving the optical characteristics of large-area, flat-type lighting systems vol.59, pp.3, 2016, https://doi.org/10.1117/1.oe.59.3.035101