Fire Science and Engineering (한국화재소방학회논문지)

Korean Institute of Fire Science and Engineering (한국화재소방학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation on Fire Spread Speed of Standard Rack in Korea for Performance based Fire Extinguishing System

성능위주 소화설비 적용을 위한 표준랙크의 화재확산속도 평가

  • Cho, Gyu-Hwan (Korea Institute of Civil Engineering and Building Technology, Fire Research Institute) ;
  • Yeo, In-Hwan (Korea Institute of Civil Engineering and Building Technology, Fire Research Institute)
  • 조규환 (한국건설기술연구원 화재안전연구소) ;
  • 여인환 (한국건설기술연구원 화재안전연구소)
  • Received : 2016.10.31
  • Accepted : 2016.12.16
  • Published : 2016.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In case of fire, vertically and intensively loaded rack warehouses are faced with a severe status due to the rapid increase in fires. In this regard, there have been trials to prevent fires from spreading by applying fire extinguishing systems, such as ESFR and In-Rack Sprinklers, vertical and horizontal barriers, etc.; however, it is difficult to calculate and design proper fire extinguishing systems caused by various composition conditions, such as the size and loading density of the rack, types of loading commodities, etc. Therefore, in this study, a standard rack was manufactured, incorporating a rack warehouse in Korea by site investigations, surveys, etc. In addition, a full scale fire test was executed to check the fire characteristics depending on the conditions of the ignition points. As a result, the extracted fire spread speed is expected to be utilized as a reference for performance comparisons of the fire extinguishing systems to be developed and applied in the future.

물품이 수직 집약적인 형태로 적재되는 랙크식 창고는 화재발생 시 화염의 급속한 상승으로 인해 그 피해가 매우 심각하다. 이에 ESFR 및 In-Rack 스프링클러, 수직 및 수평차단막 등, 다양한 소화설비 적용을 통해 화재확산 억제에 노력하고 있으나 랙크의 크기 및 적재밀도, 적재물품의 종류 등, 매우 다양한 구성조건으로 인해 적절한 소화설비 선정에 어려움이 있다. 이에 본 연구에서는 현장조사 및 설문조사 등을 통해 국내 랙크식 창고 실정을 반영한 표준랙크를 제작하였으며, 발화위치 조건에 따른 화재특성 확인을 위해 실규모화재시험을 수행하였다. 이를 통해 도출된 화재확산속도는 향후, 개발 및 적용 예정 소화설비들의 성능비교를 위한 기초자료로서 유용하게 활용될 것으로 기대한다.

Keywords

References

  1. L. Ken, P. Rich, H. Jason, D. John, W. Steve and K. Matt, "Protection of Rack Stored Exposed Expanded Group A Plastics with ESFR Sprinklers and Vertical Barriers", UL LLC (2013).
  2. M. Scott, "Sprinkler Protection for High Bay and Automated Storage in Warehouse-Type Storage Facilities", Viking (2010).
  3. FM Global-Property Loss Prevention Data Sheets 8-1, Commodity Classification (2014).
  4. T. Hirano, G. Hashimoto, S. Sugawa, K. Hasegawa, T. Ryohei, S. Ijima and R. Shibayaki, "A Review Report of Fire Sprinkler System for a Rack Warehouse", Fire Research Station-010807 (1997).
  5. N. J. Alvares, H. K. Hasegawa, K. Hout, A. C. Fernandez-Pello and J. White, "Analysis of a Run-away High Rack Storage Fire", Fire Safety Science, Vol. 4, pp. 1267-1278 (1994). https://doi.org/10.3801/IAFSS.FSS.4-1267
  6. H. Ingason, "an Experimental Study of Rack Storage Fires", Brandforsk Project 602-971 SP Report 2001:19, SP Swedish National Testing and Research Institute (2001).
  7. K. J. Overholt, M. J. Gollner, J. Perricone, A. S. Rangwala and F. A. Williams, "Warehouse Commodity Classification from Fundamental Principles. Part II: Fire Heights and Fire Spread", Fire Safety Journal, Vol. 46, No. 6, pp. 317-329 (2011). https://doi.org/10.1016/j.firesaf.2011.05.002
  8. H. Ingason, "In-rack Fire Plumes", Fire Safety Science, Vol. 5, pp. 333-344 (1997). https://doi.org/10.3801/IAFSS.FSS.5-333
  9. NFPA 13: Standard for the Installation of Sprinkler Systems (2013).