Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Manufacturing Process Improvement for Precision Inner Surface Polishing of Anodizing Treated Airplane Reservoir

아노다이징 표면 처리된 항공기 저장조의 내면 정밀연마를 위한 제조공정의 개선

  • Received : 2015.11.20
  • Accepted : 2015.11.30
  • Published : 2016.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Airplane reservoirs made of Al7075 are coated with an anodizing layer to maintain precision, air tightness and corrosion resistance. It is commonly required that the inner surface roughness of the reservoir be less than an average $0.2{\mu}m$ to maintain stable oil pressure. Even though precision polishing is necessary to achieve this quality it is not easy. Inner surface roughness is not uniform and the quality of the product is irregular because most of the work is done by hand. The purpose of this study is to design an exclusive polishing machine and to determine the standard cutting condition and polishing condition necessary for good inner surface roughness and to improve workefficiency.

Keywords

Acknowledgement

Supported by : 중소기업청

References

  1. Kim, J. S., Lim, E. S., Jung, Y. G., "Determination of Efficient Superfinishing Conditions for Mirror Surface Finishing of Titanium," Journal of Central South University Vol. 19, No. 1, pp. 155-162 2012. https://doi.org/10.1007/s11771-012-0985-6
  2. Namba, Y. and Tsuwa, H., "Wear Process of Abrasive Belt-Studies on the Belt Grinding (3rd Report)," Japan Society of Precision Engineering, Vol. 38, No. 2, pp. 202-208, 1972. https://doi.org/10.2493/jjspe1933.38.202
  3. Suzuki, K., Uematsu, T., Ohashi, H., Kitajima, K., Suga, T., Imanaka, O. and Kobayashi, A, "Development of New Mechanochemical Polishing Method with a Polishing Film for Ceramic Round Bars," CIRP Annals-Manufacturing Technology, Vol. 41, No. 1, pp. 339-342, 1992. https://doi.org/10.1016/S0007-8506(07)61218-9
  4. Evans, C. J., Paul, E., Dornfeld, D., Lucca, D. A., Byrne, G., Tricard, M., Klocke, F., Dambon, O. and Mullany, B. A., "Material Removal Mechanisms in Lapping and Polishing," CIRP Annals-Manufacturing Technology, Vol. 52, No. 2, pp. 611-633, 2003. https://doi.org/10.1016/S0007-8506(07)60207-8
  5. Jung, S. Y., Park, K. B., Jung, Y. G. and Jung, S. Y., "An Experimental Study on the Determination of Efficient Superfinishing Conditions Using Polishing Film," Journal of the Korean Society for Precision Engineering, Vol. 28, No. 8, pp. 55-61, 2009.
  6. Seong, C. H., Kim, H. C. and Kim, K. S., "Characteristics of Surface Roughness in the High Speed Micro Turning of Aluminium Alloy," Journal of the Korean Society for Precision Engineering Vol. 16, No. 7, pp. 94-100, 1999.
  7. Jun, J. U., Chung, J. S. and Ha, M. K., "Influence of Surface Roughness by Feed-rate and Side rake Angle at Turning of Non-ferrous Metals," Transactions of the Korean Society of Manufacturing Technology Engineers, Vol. 10, No. 4, pp. 1-6, 2001.
  8. Wood, G. C. and O'Sullivan, J. P., "The Anodizing of Aluminium in Sulphate Solutions," Electrochimica acta, Vol. 15, No. 12, pp. 1865-1876, 1970. https://doi.org/10.1016/0013-4686(70)85024-1

Cited by

  1. Alignment Measuring Apparatus for B-axis of Separated Multi-axis Machine vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.047
  2. A Study on Surface Characteristics of High Tensile Brass with Molybdenum Flame Spray Treatment vol.17, pp.6, 2018, https://doi.org/10.14775/ksmpe.2018.17.6.038
  3. 항공기 유압유 저장조 내면연마를 위한 슈퍼피니싱 장치 개발에 관한 연구 vol.19, pp.8, 2016, https://doi.org/10.14775/ksmpe.2020.19.08.110
  4. 대형항공기 날개 리브 가공을 위한 자동화 공정 시뮬레이션 vol.19, pp.9, 2020, https://doi.org/10.14775/ksmpe.2020.19.09.085