Journal of the Semiconductor & Display Technology (반도체디스플레이기술학회지)

The Korean Society Of Semiconductor & Display Technology (한국반도체디스플레이기술학회)
권호 표지

A Study on Heat Simulation for Heat Radiation in 150W LED

150W LED등기구 방열을 위한 열 해석에 관한 연구

  • So, Byung Moon (Dept. Convergence Technology Engineering, College of Eng., Chonbuk National Univ.)
  • 소병문 (전북대학교 공과대학 융합기술공학과)
  • Received : 2016.12.13
  • Accepted : 2016.12.27
  • Published : 2016.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

For long life time and high efficiency, not necessary in improvement of LED chip structure, but also improve heat radiation for decrease heat in LED chip. In this study, efficiency decline factor has been investigated in LED lamp as study heat characteristic, luminance flux and heat resistance. When LED lamp temperature was increased, about 7% loss of luminance flux. In consequence of temperature analysis, width of fin was the most important factor of heat radiation. As a result, secure the enough heat path is very important factor of LED lamp design.

Keywords

References

  1. B. Y. Shin, B. H. Cho, K. H. Hong and B. S. Kim, Polymer(Korea), 33, 588, 2009.
  2. S. J. Kim, "A study on the heat transfer of the heatsink", Taejon National Univ., 1988.
  3. Park, J. M., Choi, W. S., Kwon, S. H., Cha, J.H, "Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation", Journal of the KSMPE, Vol. 8, No. 4, pp. 48-53, 2009.
  4. Lee, Y. M., Chang, S. I., Sun, J. W., Yun, J. H., "Chip Breaking Characteristics Depending on Equivalent Effective Rake Angle in Turning", Journal of KSMPE, Vol.2, No.2, pp.25-31, 2004.
  5. Park, J. M., Choi, W. S., "Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation", Journal of the KSMPE, Vol. 8, No. 4, pp 48-53, 2009.
  6. Lee, J. W., Min, K. D., "A Study on Nozzle Flow and Spray Characteristics of Piezo Injector for Next Generation High Response Injection", Transactions Of the KSME(B), Vol. 30, No. 6, pp. 553-559, 2006
  7. Narendran, N., and Gu, Y., "Life of LED-based White Light Sources," Journal of Display Technology, Vol. 1, No. 1, pp. 167-171, 2005. https://doi.org/10.1109/JDT.2005.852510
  8. Sathe, S., Sammakia, B., "A Review of resent Developments in Some Practical Aspects of Air-Cooled Electronic package", Journal of heat transfer, Vol. 120, No. 4, pp.830-839, 1998. https://doi.org/10.1115/1.2825902
  9. A.K. da Silva, S. Lorente, A. Bejan, "Optimal Distribution of Discrete Heat Sources on a Plate with Laminar Forced Convection", International Journal of Heat and Mass Transfer, Vol 47, pp.2139-2148, 2004. https://doi.org/10.1016/j.ijheatmasstransfer.2003.12.009
  10. ILYoung Shin "Development of high efficiency LED luminaire and process with improved heat dissipation and light distribution technology" YuilCNT. 2013.
  11. B.C Kwon "Ultra-compact and light-weighted through analysis of thermal analysis simulation" Hanbat.Uni.v. Report., 2016.