Geomechanics and Engineering

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

An approach of seismic design for sheet pile retaining wall based on capacity spectrum method

  • Qu, Honglue (School of Geoscience and Technology, Southwest Petroleum University) ;
  • Li, Ruifeng (School of Civil Engineering and Architecture, Southwest Petroleum University) ;
  • Hu, Huanguo (School of Civil Engineering and Architecture, Southwest Petroleum University) ;
  • Jia, Hongyu (School of Civil Engineering, Southwest Jiaotong University) ;
  • Zhang, Jianjing (School of Civil Engineering, Southwest Jiaotong University)
  • Received : 2015.02.01
  • Accepted : 2016.04.29
  • Published : 2016.08.25
⟨ Previous Next ⟩

Abstract

As the forefront of structural design method, capacity spectrum method can be applied conveniently, and through this method, deformation demand of structure can be considered. However, there is no research for the seismic application in the structure of sheet pile retaining wall to report. Therefore, focusing on laterally loaded stabilizing sheet pile wall, which belongs to flexible cantilever retaining structure and meets the applying requirement of capacity spectrum method from seismic design of building structure, this paper studied an approach of seismic design of sheet pile wall based on capacity spectrum method. In the procedure, the interaction between soil and structure was simplified, and through Pushover analysis, seismic fortification standard was well associated with performance of retaining structure. In addition, by comparing the result of nonlinear time history analysis, it suggests that this approach is applicable.

Keywords

Acknowledgement

Supported by : Foundation of Education Office of Sichuan province, Southwest Petroleum University, SWPU

References

  1. Araki, Y. and Hjelmstad, K.D. (2000), "Criteria for assessing dynamic collapse of elastoplastic structural systems", Earthq. Eng. Struct. Dyn., 29(8), 1177-1198. https://doi.org/10.1002/1096-9845(200008)29:8<1177::AID-EQE963>3.0.CO;2-E
  2. Applied Technology Council (1996), ATC-40 Seismic Evaluation and Retrofit of Concrete Buildings;, Applied Technology Council, Redwood City, CA, USA.
  3. Cardone, D. (2014), "Displacement limits and performance displacement profiles in support of direct displacement-based seismic assessment of bridges", Earthq. Eng. Struct. Dyn., 43(8), 1239-1263. https://doi.org/10.1002/eqe.2396
  4. Chopra, A.K. and Goel, R.K. (1999), "Capacity-demand-diagram methods for estimating seismic deformation of inelastic structures: SDOF systems", Pacific Earthquake Engineering Research Center; University of California Berkeley, CA, USA.
  5. Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for building", Earthq. Eng. Struct. Dyn., 31(3), 561-582. https://doi.org/10.1002/eqe.144
  6. Chopra, A.K. and Goel, R.K. (2004), "A modal pushover analysis procedure to estimate seismic demands for unsymmetric-plan buildings", Earthq. Eng. Struct. Dyn., 33(8), 903-927. https://doi.org/10.1002/eqe.380
  7. Cilingir, U., Haigh, S.K., Madabhushi, S.P.G., and Zeng, X. (2011), "Seismic behaviour of anchored quay walls with dry backfill", Geomech. Geoeng., 6(3), 227-235. https://doi.org/10.1080/17486025.2011.578670
  8. Cornell, C.A. and Krawinkler, H. (2000), "Progress and challenges in seismic performance assessment", Peer Center News, 20(2), 130-139.
  9. Dolsek, M. (2010), "Development of computing environment for the seismic performance assessment of reinforced concrete frames by using simplified nonlinear models", Bull. Earthq. Eng., 8(6), 1309-1329. https://doi.org/10.1007/s10518-010-9184-8
  10. Freeman, S.A. (1975), "Evaluations of existing buildings for seismic risk - A case study of Puget Sound Naval Shipyard Bremerton", Washington Proceedings of the U.S. National Conference on Earthquake Engineers, Berkeley, CA, USA.
  11. Fajfar, P. (1999), "Capacity spectrum method based on inelastic demand spectra", Earthq. Eng. Struct. Dyn., 28(9), 979-993. https://doi.org/10.1002/(SICI)1096-9845(199909)28:9<979::AID-EQE850>3.0.CO;2-1
  12. Federal Emergency Management Agency (1997), FEMA273 NEHRP guidelines for the seismic rehabilitation of buildings; Washington D.C., USA.
  13. Federal Emergency Management Agency (2000), FEMA356 Prestandard and Commentary for the Seismic Rehabilitation of Buildings; Washington D.C., USA.
  14. Goel, R.K. (2010), "Simplified procedure for seismic evaluation of piles with partial-moment connection to the deck in marine oil terminals", J. Struct. Eng., 136(5), 521-531. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000153
  15. Gu, R.R. and Miao, Z.W. (2011), "Assessment on structural performance by displacement-pattern-based capacity spectrum method", J. Xi'an Univ. Architect. Technol., 43(6), 790-794. [In Chinese]
  16. Huang, C., Ren, W.Z. and Kong, L.W. (2013), "New mathematical modelling of stabilizing pile with prestressed Tieback Anchors", Math. Problem. Eng., 2013(4), 561-576.
  17. International Navigation Association (2001), Seismic design guidelines for port structures; Tokyo, Japan.
  18. Japan Road Association (2002), Specifications for Highway Bridges V Seismic design series; MARUZEN Co. Ltd., Tokyo, Japan.
  19. Ji, X.P. and Dong, J. (2009), "Principle and application of pushover capacity spectrum", Sichuan Build. Sci., 35(3), 148-151.
  20. Kuramoto, H., Teshigawara, M., Okuzono, T., Koshika, N., Takayama, M. and Hori, T. (2000), "Predicting the earthquake response of buildings using equivalent single degree of freedom system", Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand, February.
  21. Li, Y., Gong, J.X. and Wu, P. (2010a), "Research on pushover analysis method for seismic performance of pile-supported wharf structure", Hydro-Sci. Eng., 4, 73-80. [In Chinese]
  22. Li, X.P., He, S.M. and Wu, Y. (2010b), "Seismic displacement of slopes reinforced with piles", J. Geotech. Geoenviron. Eng., 136(6), 880-884. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000296
  23. Liao, W.C. and Goel, S.C. (2014), "Performance-based seismic design of RC SMF using target drift and yield mechanism as performance criteria", Adv. Struct. Eng., 17(4), 529-542. https://doi.org/10.1260/1369-4332.17.4.529
  24. Liu, L.J. and Jia, M.M. (2011), "Application of capacity spectrum method in structural seismic performance assessment", Build. Struct., 41(s1), 242-244.
  25. Liu, J.B., Liu, X.Q. and Xue, Y.L. (2009), "Study on applicability of a Pushover analysis method for seismic analysis and design of underground structures", Eng. Mech., 26(1), 49-57. [In Chinese]
  26. Liu, J.B., Wang, W.H. and Gautam, D. (2014), "Pushover analysis of underground structures: Method and application", Sci. China Technol. Sci., 57(2), 423-437. [In Chinese] https://doi.org/10.1007/s11431-013-5430-z
  27. Newmark, N.M. and Hall, W.J. (1973) , "Seismic design criteria for nuclear reactor facilities", Building Practice for Disaster Mitigation, National Bureau of Standards, U.S. Department of Commerce.
  28. Newmark, N.M. and Hall, W.J. (1982), "Earthquake spectra and design", Earthq. Eng. Res. Inst., Berkeley, CA, USA.
  29. Nozu, A., Ichii, K. and Sugano, T. (2004), "Seismic design of port structures", J. Japan Assoc. Earthq. Eng., 4(3), 195-208.
  30. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2008), "Displacement-based seismic design of structures", Earthq. Spectra, 24(2), 555-557. https://doi.org/10.1193/1.2932170
  31. Qu, H.L. and Zhang, J.J. (2013), "Research on seismic response of anti-sliding sheet pile wall by shaking table test", Rock Soil Mech., 34(3), 743-750. [In Chinese]
  32. Qu, H.L., Zhang, J. and Zhao, J.X. (2011), "Strength reduction factor (R factor) against near-fault ground motion", Earthq. Eng. Eng. Vib., 10(2), 195-209. https://doi.org/10.1007/s11803-011-0058-0
  33. Qin, J.C. and Luo, Q.F. (2006), "ATC-40 Capacity spectrum method applied to estimate the deformation of structure", Earthq. Eng. Eng. Vib., 26(6), 64-70.
  34. Rathje, E.M., Wang, Y., Stafford, P.J., Antonakos, G. and Saygili, G. (2014), "Probabilistic assessment of the seismic performance of earth slopes", Bull. Earthq. Eng., 12(3), 1071-1090. https://doi.org/10.1007/s10518-013-9485-9
  35. Saygili, G. (2008), "Probabilistic Seismic Hazard Analysis for the Sliding Displacement of Slopes: Scalar and Vector Approaches", J. Geotech. Geoenviron. Eng., 134(6), 804-814. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:6(804)
  36. Song, P.Y., Lu, D.G. and Yu, X.H. (2014), "Seismic fragility analysis based on capacity-spectrum method", Proceeding of 23rd National Structure Engineering Academic Conference, Wu Han, China, August. [In Chinese]
  37. Vidic, T., Fajfar, P. and Fischinger, M. (1994), "Consistent inelastic design spectra: Strength and displacement", Earthq. Eng. Struct. Dyn., 23(5), 507-521. https://doi.org/10.1002/eqe.4290230504
  38. Xue, Q.A. (2001), "A direct displacement-based seismic design procedure of inelastic structures", Eng. Struct., 23(11), 1453-1460. https://doi.org/10.1016/S0141-0296(01)00048-7
  39. Yang, P., Li, D., Li, Y. and Lai, M. (2000), "The progress of push-over analysis method for earthquakeresistance structures", J. Chongqing Jianzhu Univ., 22, 87-92.
  40. Ye, L.P., Ma, Q.L. and Miao, Z.W. (2013), "Numerical and comparative study of earthquake intensity indices in seismic analysis", Struct. Des. Tall Special Build., 22(4), 362-381. https://doi.org/10.1002/tal.693
  41. Zekri, A., Ghalandarzadeh, A., Ghasemi, P. and Aminfar, M. (2014), "Experimental study of remediation measures of anchored sheet pile quay walls using soil compaction", Ocean Eng., 93, 45-63.
  42. Zhang, J.J., Feng, J. and Xiao, S.G. (2009), "Discussions on two key technical problems for seismic design of retaining structures", J. Southwest Jiaotong Univ., 44(3), 321-326. [In Chinese]

Cited by

  1. Dynamic response of anchored sheet pile wall under ground motion: Analytical model with experimental validation 2017, https://doi.org/10.1016/j.soildyn.2017.09.015
  2. Systematization modern devices for the protection of buildings and structures due to seismic impacts vol.107, 2017, https://doi.org/10.1051/matecconf/201710700065
  3. Corrosion Rate Estimation in Steel Sheet Pile Walls - Comparison between Empirical Models and Eurocode 3, Part 5 vol.39, pp.1663-4144, 2018, https://doi.org/10.4028/www.scientific.net/JERA.39.76
  4. Seismic Response Characteristics of Stabilizing Pile Based on Elastic-Plastic Analysis vol.2018, pp.1875-9203, 2018, https://doi.org/10.1155/2018/7672587
  5. Dynamic response of a slope reinforced by double-row anti-sliding piles and pre-stressed anchor cables vol.16, pp.1, 2019, https://doi.org/10.1007/s11629-018-5041-z
  6. Numerical analysis of sheet pile wall structure considering soil-structure interaction vol.16, pp.3, 2016, https://doi.org/10.12989/gae.2018.16.3.309
  7. Optimizing ANN models with PSO for predicting short building seismic response vol.36, pp.3, 2020, https://doi.org/10.1007/s00366-019-00733-0
  8. Lateral earth pressure and bending moment on sheet pile walls due to uniform surcharge vol.23, pp.1, 2016, https://doi.org/10.12989/gae.2020.23.1.071
  9. Predicting the seismic response of the short structures by considering the Whale Optimization Algorithm vol.7, pp.None, 2016, https://doi.org/10.1016/j.egyr.2021.06.095