Advances in concrete construction

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Mechanical properties of recycled aggregate concrete produced with Portland Pozzolana Cement

  • Suman, Saha (Department of Civil Engineering, National Institute of Technology Karnataka) ;
  • Rajasekaran, C (Department of Civil Engineering, National Institute of Technology Karnataka)
  • Received : 2016.04.18
  • Accepted : 2016.06.23
  • Published : 2016.03.25
⟨ Previous Next ⟩

Abstract

The quantity of construction and demolition waste has been greatly increasing recently. It causes many problems to the environment. For this reason, demolition waste management becomes inevitable in order to overcome the environmental issues. The present study aims to evaluate the effects of using recycled coarse aggregate, which is generated from construction and demolition waste, on the properties of recycled aggregate concrete. An experimental investigation on the strength characteristics of concrete made with recycled coarse aggregate is presented and discussed in this paper. In this study, Portland Pozzolana Cement (fly ash based) is used instead of ordinary Portland cement. The results of this investigation show the possibility of the use of recycled coarse aggregates in the production of fresh concrete. Use of demolition waste as coarse aggregate will lead to a cleaner environment with a significant reduction of the consumption of natural resources. A comparative study on the strength characteristics of recycled aggregate concrete made with Ordinary Portland Cement and Portland Pozzolana Cement is presented and discussed in this paper.

Keywords

References

  1. Dosho, Y. (2007), "Development of a sustainable concrete waste recycling system-Application of recycled aggregate concrete produced by aggregate replacing method", J. Adv. Concrete Tech., 5(1), 27-42. https://doi.org/10.3151/jact.5.27
  2. European Aggregates Association (2012), "Annual review 2011-2012", Brussels, Belgium.
  3. Hemalatha, B.R., Prasad, N. and Subramanya, B.V. (2008), "Construction and demolition waste recycling for sustainable growth and development", J. Envir. Res. Develop., 2(4), 759-765.
  4. IS: 10262 (2009), "Concrete mix proportioning-guidelines", Bureau of Indian Standards, New Delhi.
  5. IS: 1489 (1991) (Part 1). "Portland pozzolana cement-Specification." Bureau of Indian Standards, New Delhi.
  6. IS: 2386 (1963), "Methods of tests for aggregates for concrete", Bureau of Indian Standards, New Delhi.
  7. IS: 383 (1970), "Specifications for coarse and fine aggregates from natural sources of concrete", Bureau of Indian Standards, New Delhi.
  8. IS: 456 (2000), "Code of practice for plain and reinforced concrete", Bureau of Indian Standards, New Delhi.
  9. IS: 516 (1959), "Methods of test for strength of concrete", Bureau of Indian Standards, New Delhi.
  10. IS: 5816 (1970), "Splitting tensile strength of concrete-Method of test", Bureau of Indian Standards, New Delhi.
  11. Kou, S.C. and Poon, C.S. (2012), "Enhancing the durability properties of concrete prepared with coarse recycled aggregate", Constr. Build. Mater., 35, 69-76. https://doi.org/10.1016/j.conbuildmat.2012.02.032
  12. Mukharjee, B.B. and Barai, S.V. (2015), "Characteristics of sustainable concrete incorporating recycled coarse aggregates and colloidal nano-silica", Adv. Concrete Constr., 3(3), 187-202. https://doi.org/10.12989/acc.2015.3.3.187
  13. Saravanakumar, P. and Dhinakaran, G. (2013), "Durability characteristics of recycled aggregate concrete", Struct. Eng. Mech., 47(5), 701-711. https://doi.org/10.12989/sem.2013.47.5.701
  14. Shah, A., Jan, I.U., Khan, R.U. and Qazi, E.U. (2013), "Experimental investigation on the use of recycled aggregates in producing concrete", Struct. Eng. Mech., 47(4), 545-557. https://doi.org/10.12989/sem.2013.47.4.545
  15. Shaikh, F., Kerai, S. and Kerai, S. (2015), "Effect of micro-silica on mechanical and durability properties of high volume fly ash recycled aggregate concretes (HVFA-RAC)", Adv. Concrete Constr., 3(4), 317-331. https://doi.org/10.12989/acc.2015.3.4.317
  16. Shetty, M.S. (2003), "Concrete technology-Theory and practice", Ram Nagar, New Delhi.
  17. Silva, R.V., De Brito, J. and Dhir, R.K. (2014), "Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production", Constr. Build. Mater., 65, 01-217. https://doi.org/10.1016/j.conbuildmat.2014.04.003
  18. Suman, S., Rajasekaran, C. and Vinayak P.T. (2015), "Use of recycled coarse aggregates as an alternative in construction industry-a review", Proceedings of the 4th International Engineering Symposium (IES 2015), Kumamoto University, Japan.
  19. Tam, V.W. (2009), "Comparing the implementation of concrete recycling in the Australian and Japanese construction industries", J. Clean. Prod., 17(7), 688-702. https://doi.org/10.1016/j.jclepro.2008.11.015

Cited by

  1. Performance of bricks and brick masonry prism made using coal fly ash and coal bottom ash vol.4, pp.4, 2016, https://doi.org/10.12989/acc.2016.4.4.231
  2. The effect of recycled coarse aggregate (RCA) with surface treatment on concrete mechanical properties vol.195, pp.2261-236X, 2018, https://doi.org/10.1051/matecconf/201819501017
  3. Properties of concrete incorporating sand and cement with waste marble powder vol.4, pp.2, 2016, https://doi.org/10.12989/acc.2016.4.2.145
  4. Stress-strain relationship for recycled aggregate concrete after exposure to elevated temperatures vol.19, pp.6, 2016, https://doi.org/10.12989/cac.2017.19.6.609
  5. Development of mix design method for geopolymer concrete vol.5, pp.4, 2016, https://doi.org/10.12989/acc.2017.5.4.377
  6. Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and ground granulated blast-furnace slag vol.6, pp.2, 2016, https://doi.org/10.12989/acc.2018.6.2.103
  7. Investigation on the Potential Use of Recycled Fine Aggregate to Produce Geopolymer Mortar Mix vol.8, pp.1, 2016, https://doi.org/10.1520/acem20180084
  8. Volume Change Characteristics of Eco-Friendly Mortar Mixes Produced with Geopolymeric Binder and Recycled Fine Aggregate vol.48, pp.1, 2016, https://doi.org/10.1520/jte20180316
  9. Strength and Shrinkage Properties of Heat-Cured Fly Ash-Based Geopolymer Mortars Containing Fine Recycled Concrete Aggregate vol.48, pp.6, 2019, https://doi.org/10.1520/jte20180799
  10. An experimental study on effect of Colloidal Nano-Silica on tetranary blended concrete vol.7, pp.2, 2016, https://doi.org/10.12989/acc.2019.7.2.107
  11. Rheological and Mechanical Properties of Ultra-High-Performance Concrete Containing Fine Recycled Concrete Aggregates vol.12, pp.22, 2019, https://doi.org/10.3390/ma12223717
  12. Rheological, physico-mechanical and durability properties of multi-recycled concrete vol.9, pp.1, 2016, https://doi.org/10.12989/acc.2020.9.1.009
  13. Sustainable self compacting acid and sulphate resistance RAC by two stage mixing approaches vol.9, pp.1, 2016, https://doi.org/10.12989/acc.2020.9.1.055
  14. Eco-friendly High-Strength Concrete Engineered by Micro Crumb Rubber from Recycled Tires and Plastics for Railway Components vol.9, pp.1, 2016, https://doi.org/10.1520/acem20180058
  15. Residual Properties and Axial Bearing Capacity of Steel Reinforced Recycled Aggregate Concrete Column Exposed to Elevated Temperatures vol.7, pp.None, 2016, https://doi.org/10.3389/fmats.2020.00187
  16. Reinforced fibrous recycled aggregate concrete element subjected to uniaxial tensile loading vol.9, pp.2, 2016, https://doi.org/10.12989/acc.2020.9.2.195
  17. Performance of eco-friendly mortar mixes against aggressive environments vol.10, pp.3, 2020, https://doi.org/10.12989/acc.2020.10.3.237
  18. Effect of horizontal joints on structural behavior of sustainable self-compacting reinforced concrete beams vol.10, pp.5, 2016, https://doi.org/10.12989/acc.2020.10.5.455
  19. Pozzolanicity identification in mortars by computational analysis of micrographs vol.27, pp.2, 2021, https://doi.org/10.12989/cac.2021.27.2.175
  20. Strength characteristics of granulated ground blast furnace slag-based geopolymer concrete vol.11, pp.3, 2016, https://doi.org/10.12989/acc.2021.11.3.219
  21. Torsional Crack Localization in Palm Oil Clinker Concrete Using Acoustic Emission Method vol.14, pp.18, 2016, https://doi.org/10.3390/ma14185446
  22. Toward a codified design of recycled aggregate concrete structures: Background for the new FIB MODEL CODE 2020 AND EUROCODE 2 vol.22, pp.5, 2016, https://doi.org/10.1002/suco.202000512
  23. A scientometric review of waste material utilization in concrete for sustainable construction vol.15, pp.None, 2016, https://doi.org/10.1016/j.cscm.2021.e00683
  24. Influence of alkaline modification on selected properties of banana fiber paperbricks vol.11, pp.1, 2016, https://doi.org/10.1038/s41598-021-85106-8
  25. Utilization of Crushed Pavement Blocks in Concrete: Assessment of Functional Properties and Environmental Impacts vol.14, pp.23, 2021, https://doi.org/10.3390/ma14237361
  26. A systematic review of waste materials in cement-based composites for construction applications vol.45, pp.None, 2016, https://doi.org/10.1016/j.jobe.2021.103447
  27. Residual axial capacity of square recycled aggregate concrete-filled steel tube columns after blast loads vol.47, pp.None, 2016, https://doi.org/10.1016/j.jobe.2021.103865